Search   
MSDS 
:
 Poly(1,4-butylene adipate)
CAS 
:
 25103-87-1
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 25103-87-1 |Poly(1,4-butylene adipate) | 100.0 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Treat
symptomatically and supportively. Get medical aid. Do NOT induce
vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls
of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Remove contaminated clothing and wash before reuse. Use with
adequate ventilation. Minimize dust generation and accumulation.
Avoid contact with eyes, skin, and clothing. Avoid ingestion and
inhalation. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 25103-87-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: none reported
pH: 5.2
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not applicable.
Freezing/Melting Point: 56-60c
Autoignition Temperature: Not applicable.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: 1.0190
Molecular Formula: Polymer
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 25103-87-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Poly(1,4-butylene adipate) -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 22 Do not breathe dust.
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 25103-87-1: No information available.
Canada
CAS# 25103-87-1 is listed on Canada's DSL List.
CAS# 25103-87-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 25103-87-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/25/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(1R,3S)-2,2-Dimethyl-3-(2-oxopropyl)-cyclopropaneacetonitrile, 99% 110847-02-4
Alpha, Alpha, Alpha-Trifluoro-O-Tolunitrile, 98% 447-60-9
3',6'-Dichlorofluoran, 92% (uv-vis) 630-88-6
2,2-Dimethyl-4-Phenyl-2H-Imidazole-1-Oxide, 99+% 0-00-1
n-Propyl isocyanate, 99% 110-78-1
Uniblue A Sodium Salt, 98% (UV-VIS) 14541-90-3
9H-Fluorene-9-Carboxylic Acid, 97% 1989-33-9
tert-Butyl chloroacetate, 99+% (gc) 107-58-4
Acid Red 183 6408-31-7
3,5-Dichloro-1,2,4-Thiadiazole 2254-88-8
Thymolphthalein Complexon 62698-55-9
1,2,4-Benzenetricarboxylic acid, 99+% 528-44-9
MTT, 98% 298-93-1
o-Benzaldehydesulfonic acid sodium salt, 90% (titr.) 1008-72-6
2,4-Dinitrobenzoic Acid, 99% (Titr.) 610-30-0
Cinnamoyl chloride, 99+% (Titr.) 102-92-1
Iodine Monochloride, Reagent ACS 7790-99-0
1-Adamantyl Isothiocyanate, 99% 4411-26-1
3,3-Dimethyl-1-Butyne, 98% 917-92-0
Diethyl Dithiophosphate, Ammonium Salt, 95% 1068-22-0
Allyl phenyl ether, 99+% (GC) 1746-13-0
Benzyl Salicylate, 98+% 118-55-8
Ethyl succinyl chloride, 98% 14794-31-1
Molecular sieves, 5a, 8 to 12 mesh 1332-58-7
Coumarin 138, Laser Grade, 99% (UV-Vis) 62669-74-3
N,N-Diethylethanolamine, P.A. 100-37-8
(R)-(+)-N,N-Dimethyl-1-phenethylamine, 99+% 19342-01-9
Lithium Perchlorate, Reagent ACS 7791-03-9
Alpha,alpha-dicyclopropyl-4-methylbenzenem ethanol, 96% 71172-47-9
Butane, 1,1'-sulfonylbis-, 99+% 598-04-9
(R)-(-)-2,2-Dimethyl-1,3-dioxolane-4- methanol, 98% 14347-78-5
5-Methoxy-2-methylindole, 99+% 1076-74-0
Phenylethyl isothiocyanate, 96% 2257-09-2
Poly(1,4-butylene adipate) 25103-87-1
Lithocholic acid, 98% 434-13-9
2-Methylnaphth(1,2-D)Oxazole, 98% (GC) 85-15-4
Cholesteryl stearate, 96% 35602-69-8
N,N-Dimethyl-P-Phenylenediamine Sulfate 99% (Titr.) 6219-73-4
ETHYL SORBATE, 99% 2396-84-1
Ethyl n-Piperazinecarboxylate, 99% 120-43-4
(6,6,7,7,8,8,8-Heptafluoro-2,2-dimethyl -3,5-octanedionato)silver, 76121-99-8
Bisphenol A Dimethacrylate 3253-39-2
3-Acetyl-2,4-dimethylpyrrole 2386-25-6
Ethyl 2-Methylbutyrate, 99% 7452-79-1
4-Octylbenzoyl chloride, 99% (titr.) 50606-97-8
2,6-Dichloro-3-(Trifluoromethyl)pyridine, 97% 55304-75-1
N-(4-Vinylbenzyl)-N,N-Dimethylamine, Stabilized with 0.1% 2245-52-5
2,4-Pentanediol, 99%, (mixture of isomers) 625-69-4
1-Hexadecylamine, straight-chained C16, 90% 143-27-1
1-Chloro-4-fluorobenzene, 98% 352-33-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net