**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 18355-73-2 |2,3-Difluorobenzoyl chloride | 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Combustible liquid and vapor. Use of water will
produce irritating and toxic vapors of hydrogen chloride.
Hydrochloric acid solutions react with most metals, forming flammable
hydrogen gas.
Extinguishing Media:
Use carbon dioxide or dry chemical.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation. Do not expose
spill to water. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Discard contaminated shoes.
Storage:
Keep away from sources of ignition. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Store protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 18355-73-2:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 85-87 deg C @ 14 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 91 deg C ( 195.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Hydrolysis.
Specific Gravity/Density: 1.423
Molecular Formula: C7H3ClF2O
Molecular Weight: 176.55
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
May decompose on exposure to moist air or water.
Conditions to Avoid:
Ignition sources, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 18355-73-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,3-Difluorobenzoyl chloride -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 18355-73-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 18355-73-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 18355-73-2 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/20/2004 Revision #0 Date: Original.
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2,3-Difluorobenzoyl chloride
| 18355-73-2 |
|
2-Fluoro-5-(trifluoromethyl)benzoyl chloride, 97%
| 207981-46-2 |
|
Lithium aluminium hydride, 4.0M solution in diethyl ether
| 60-29-7 |
|
4-Chlorophenylmagnesium bromide, 1M solution in diethyl ether
| 60-29-7 |
|
4-Fluorophenylmagnesium bromide, 2M solution in diethyl ether
| 60-29-7 |
|
Phenylmagnesium bromide, 1M solution in THF
| 100-58-3 |
|
Ethyl magnesiumbromide, 1M solution in THF
| 109-99-9 |
|
Methylmagnesium bromide, 1M solution in THF
| 75-16-1 |
|
(R)-1-(4-Chlorophenyl)ethylamine, produced by BASF AG
| 27298-99-3 |
|
Ethylenediamine Tetraacetic Acid
| 60-00-4 |
|
(S)-1-(4-Chlorophenyl)ethylamine, produced by BASF AG
| 4187-56-8 |
|
DL-2-Amino-3-phenyl-1-propanol, 98%
| 16088-07-6 |
|
DL-2-Phenylglycinol, 98%
| 7568-92-5 |
|
DL-Methioninol
| 502-83-0 |
|
2-Aminopentanol, 98%
| 16369-14-5 |
|
4-Chlorothiobenzamide, 98%
| 2521-24-6 |
|
Acetylpyrazine, 97%
| 22047-25-2 |
|
2-Aminothiobenzamide, 98%
| 2454-39-9 |
|
2,4-Dichlorothiobenzamide, 98%
| 2775-38-4 |
|
2,6-Dichlorothiobenzamide, 98%
| 1918-13-4 |
|
4-Fluorothiobenzamide, 99%
| 22179-72-2 |
|
2-Fluorothiobenzamide, 98%
| 75907-82-3 |
|
3-Iodothiobenezamide
| 106748-26-9 |
|
1,1'-Binaphthyl
| 604-53-5 |
|
2-Bromothiobenzamide, 98%
| 30216-44-5 |
|
2-Chlorothiobenzamide, 98%
| 15717-17-6 |
|
3-Methylthiobenzamide, 98%
| 2362-63-2 |
|
3,4-Dimethoxyphenylthioacetamide, 98%
| 145736-65-8 |
|
2,6-Dimethoxythiobenzamide
| 77378-18-8 |
|
Diphenylthioacetamide, 97%
| 17518-50-2 |
|
(s)-n-boc-2-amino-4-methylpentyl cyanide
| 172695-24-8 |
|
(s)-n-boc-2-amino-3-phenylpropyl cyanide
| 172695-25-9 |
|
3-Bromopropionaldehyde dimethylacetal
| 36255-44-4 |
|
N-BOC-trans-4-Hydroxyl-L-proline methyl ester, 97%
| 74844-91-0 |
|
4-(Benzyloxy)pyridine N-oxide, 97%
| 2683-66-1 |
|
1-(4-Chlorophenyl)piperazine dihydrochloride, 95% (tlc)
| 38869-46-4 |
|
(S)-(-)-N-BOC-2-Amino-1,5-pentanediol
| 162955-48-8 |
|
(S)-(-)-N-BOC-2-Amino-1,4-butanediol
| 128427-10-1 |
|
3,3,3-Trifluoro-(2-tetrahydrofuranylmethyl)propionic acid
| 480438-81-1 |
|
3,3,3-Trifluoro-(2-tetrahydrothienylmethyl)propionic acid
| 480438-83-3 |
|
4,4-Diphenyl-2-cyclohexen-1-one
| |
|
2-Sulfobenzoic acid
| 632-25-7 |
|
1-(4-Bromobutoxy)-2-chlorobenzene
| 23468-00-0 |
|
1-(4-Bromobutoxy)-3-chlorobenzene, 95%
| 23529-80-8 |
|
1-(4-Bromobutoxy)-2,4-dichlorobenzene
| 37395-50-9 |
|
(3-Methylphenoxy)acetic acid
| 1643-15-8 |
|
(4-Methylphenoxy)acetic acid
| 940-64-7 |
|
3-Nitrophenoxyacetic acid, 98%
| 1878-88-2 |
|
4-Nitrophenoxyacetic acid, 95%
| 1798-11-4 |
|
(s)-(-)-1-Phenyl-1-propanol, 95% (98% e.e.)
| 613-87-6 |
|
|