Search   
MSDS 
:
 (2s,3s)-(+)-2,3-butanediol,99%
CAS 
:
 19132-06-0
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 19132-06-0 |(2S,3S)-(+)-2,3-BUTANEDIOL | 99% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Hygroscopic (absorbs moisture from the air).Air
sensitive.

Potential Health Effects
Eye:
No information regarding eye irritation and other potential effects
was found.
Skin:
No information regarding skin irritation and other potential effects
was found.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Immediately flush
eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. For small fires,
use dry chemical, carbon dioxide, or water spray. For large fires,
use water spray, fog or regular foam. Cool containers with flooding
quantities of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 19132-06-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: very slightly yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: 0.22 hPa @ 20 deg C
Viscosity: Not available.
Boiling Point: 179 - 182 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 85 deg C ( 185.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: .9870g/cm3
Molecular Formula: C4H10O2
Molecular Weight: 90.12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants, exposure to moist air or
water.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 19132-06-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
(2S,3S)-(+)-2,3-BUTANEDIOL -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
WGK (Water Danger/Protection)
CAS# 19132-06-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 19132-06-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 19132-06-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/31/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Bromo-1-(1-methyl-1H-benzimidazol-2-yl)-1-ethanone 56653-43-1
Dibenzyl Azodicarboxylate, 94+% 2449-05-0
Metanil yellow (tech.), 85% (uv-vis) 587-98-4
6-Quinolinecarboxaldehyde 4113-04-6
5-Pyrimidinecarboxylic acid 4595-61-3
4-Iodopyridine 15854-87-2
5-Methylbenzo[b]thiophene-2-boronic acid 136099-65-5
(2-Piperidino-3-pyridinyl)methanol 690632-84-9
5-Pyrimidinylboronic acid 109299-78-7
5-Methylbenzoxazole, 99.5+%
DL-4-Hydroxymandelic acid monohydrate 184901-84-6
3,5-Dichlorobenzyl Alcohol, 98% 60211-57-6
4-Bromobenzylamine Hydrochloride, 98% 26177-44-6
Ethyl 2-(2-tritylaminothiazole-4-yl)-2-hydroxyiminoacetate 66339-00-2
1,2,5-Oxadiazole-3-carboxylic acid 88598-08-7
(Aminomethyl)Phosphonic Acid, 99% 1066-51-9
2,3-Dihydrobenzo[b]furan-7-methanol 151155-53-2
[2-(4-Methoxyphenoxy)ethyl]ammonium chloride 98959-77-4
2,6-Dichloro-n-hydroxybenzenecarboximidoyl chloride 6579-27-7
5-(3-Methoxyphenyl)-2-furoic acid 54022-96-7
4-Methylthiophene 2-ylmethanol 74395-18-9
2-[2-(Bromomethyl)phenyl]-5,5-dimethyl-1,3,2-dioxaborinane 166821-88-1
1-(4-Methylphenyl)pyrrolidine 91271-80-6
(2s,3s)-(+)-2,3-butanediol,99% 19132-06-0
4-(1,3,2-Dioxaborinan-2-yl)benzaldehyde 160068-88-2
5-Acetyl-2-thiophenecarbaldehyde 4565-29-1
(1-Methyl-1H-imidazol-4-yl)methylamine 486414-83-9
n-Benzyl-3-carbomethoxy-4-piperidone sodium salt,monohydrate, tech.
Gelatin 9000-70-8
3-Methoxy-4-nitrobenzoic acid, 98% 5081-36-7
Gentian Violet 548-62-9
tert-Butyl 4-(4-formylphenyl)tetrahydro-1(2H)-pyrazinecarboxylate 197638-83-8
3-(1H-Imidazol-1-yl)propanoic acid 18999-45-6
tert-Butyl 4-(4-cyanophenyl)tetrahydro-1(2H)-pyrazinecarboxylate 186650-98-6
Barium bromide dihydrate, 99% 7791-28-8
4-[4-(tert-Butoxycarbonyl)piperazino]benzoic acid 162046-66-4
3-(2-Methyl-4-pyrimidinyl)benzenesulfonyl chloride 465514-07-2
(5-Bromobenzo[b]furan-2-yl)methylamine 165736-51-6
Epifluorohydrin, 97% 503-09-3
2-Fluoro-5-methylphenol, 98% 63762-79-8
Trans-Dichlorodiamine Platinum (II), 99.95% 14913-33-8
Terbium tetrafluoride, 99.5%
5-(Bromomethyl)-1,2,3-benzothiadiazole 0-01-1
4-Methylthiophene-2-carbonyl chloride 32990-47-9
(1-Methyl-1H-imidazol-5-yl)methylamine 486414-86-2
5-Methyl-4-isoxazolecarbonyl chloride 67305-24-2
4-Methylthiophene-2-carboxaldehyde 6030-36-0
3-Bromo-2,6-dimethoxybenzoic acid 73219-89-3
3-(1H-1,2,4-Triazol-1-yl)propanoic acid 76686-84-5
Dibenzo[b,d]furan-2-carbaldehyde 5397-82-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net