**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 192-97-2 |Benzo[e]pyrene | 99 | 205-892-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed.Cancer
suspect agent.The toxicological properties of this material have not
been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Toxic in contact with skin.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. Toxic
if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Toxic if inhaled.
Chronic:
Cancer suspect agent.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 192-97-2:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Wear a NIOSH/MSHA
or European Standard EN 149 approved full-facepiece
airline respirator in the positive pressure mode with
emergency escape provisions.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Powder
Color: yellow-green
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 180.00 - 182.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C20H12
Molecular Weight: 252.31
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 192-97-2: DJ4200000
LD50/LC50:
Not available.
Carcinogenicity:
Benzo[e]pyrene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2811
Packing Group: I
IMO
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing Group: I
RID/ADR
Shipping Name: TOXIC SOLID, ORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 2811
Packing group: I
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 192-97-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 192-97-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 192-97-2 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #4 Date: 11/21/2002
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
(+)-Himbacine
| 6879-74-9 |
|
Ytterbium(III) triflate hydrate, 99.9%
| 252976-51-5 |
|
Ethyl oleate, mixture of isomers, tech., 90%
| 111-62-6 |
|
Sodium hydride, 60% dispersion in mineral oil, in resealable cans
| 7646-69-7 |
|
3-(Trifluoromethyl)phenylhydrazine, tech.,, 90%
| 368-78-5 |
|
N,N'-Diaminoguanidine Monohydrochloride 98%
| 36062-19-8 |
|
Iron(III) fluoride, anhydrous, 98%
| 7783-50-8 |
|
2-Mercaptobenzothiazole, 99% (Titr.)
| 149-30-4 |
|
3-Amino-2,6-Dimethoxypyridine Monohydrochloride, 95%
| 80789-72-6 |
|
Lithium hydride, in resealable cans, 98%
| 7580-67-8 |
|
1,4-Bis(trimethylsilyl)benzene, 98%
| 13183-70-5 |
|
Carboxymethyl Cellulose, Sodium Salt, Average MW 90.000
| 9004-32-4 |
|
Carboxymethyl Cellulose, Sodium Salt, Average MW 250000 (DS=0.7)
| 9004-32-4 |
|
Carboxymethyl Cellulose, Sodium Salt, Average MW 250000 (DS=0.9)
| 9004-32-4 |
|
Carboxymethyl Cellulose, Sodium Salt, Average MW 250000 (DG=1.2)
| 9004-32-4 |
|
Carboxymethyl Cellulose, Sodium Salt, Average MW 700000
| 9004-32-4 |
|
Tyloxapol
| 25301-02-4 |
|
4-Vinylbenzyl chloride, stabilized with 500 ppm 4-tert-butylcatechol
| 1592-20-7 |
|
Ethyl 3-phenylglycidate, 90%
| 121-39-1 |
|
2-Methyltetrahydrofuran-3-thiol
| 57124-87-5 |
|
Bis(2-methyl-3-furyl)disulphide, 98%
| 28588-75-2 |
|
2-Methylfuran-3-thiolacetate, 80%
| 55764-25-5 |
|
2-Tetrahydrofuroic acid, 99+%(gc)
| 16874-33-2 |
|
2,2,4,4,6,6-Hexamethyl-S-trithiane
| 828-26-2 |
|
MALEIC ACID, DISODIUM SALT, HYDRATE
| 371-47-1 |
|
Neurodye Di-8-ANEPPQ
| 0-01-1 |
|
Neurodye Di-12-ANEPPQ
| 0-01-1 |
|
Neurodye Di-4-ANEPPS
| 90134-00-2 |
|
Neurodye Di-8-ANEPPS
| 157134-33-7 |
|
Thallous formate, 98% (titr.)
| 992-98-3 |
|
Neurodye FM1-84
| 0-01-1 |
|
Neurodye RH-237
| 0-01-1 |
|
Neurodye RH-421
| 107610-19-5 |
|
Neurodye RH-795
| 0-01-1 |
|
Neurodye FM1-43
| 149838-22-2 |
|
Neurodye FM4-64
| 0-01-1 |
|
Neurodye FM2-10
| 0-01-1 |
|
ISOQUINOLINE-N-OXIDE
| 1532-72-5 |
|
1,3-Dithiolane-2,4,5-trithione, oligomer
| 123399-69-9 |
|
Dess-Martin periodinane, 15 wt% solution in dichloromethane
| 75-09-2 |
|
N-BENZYLIDENE-1-NAPTHYLAMINE, 97%
| 890-51-7 |
|
2-METHOXY-1-NAPHTHALENEMETHANOL
| 40696-22-8 |
|
(S)-(+)-Ibuprofen, 99%
| 51146-56-6 |
|
2-ETHOXYNAPHTHALENE, 98%
| 93-18-5 |
|
Trifluoromethanesulphinic acid potassium salt
| 41804-89-1 |
|
5-Chlorobarbituric acid
| 19645-77-3 |
|
n-Butyl (2R,3S)-(-)-2,3-epoxybutyrate, 98%
| 0-01-1 |
|
Diethyl (2R,3R)-(-)-2,3-epoxysuccinate, 98%
| 74243-85-9 |
|
Diethyl (2S,3S)-(+)-2,3-epoxysuccinate, 98%
| 73890-18-3 |
|
Benzo(e)pyrene, 99%
| 192-97-2 |
|
|