Search   
MSDS 
:
 N-Methyl-N-(3-pyridylmethyl)amine, TECH
CAS 
:
 20173-04-0
SYNONYMS 
:
 3-(N-(Methylaminomethyl)pyridine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 20173-04-0 |N-Methyl-N-(3-pyridylmethyl)amine | 100 | 243-561-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. Amines have been known to cause skin irritation
and sensitization.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 20173-04-0:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless - pale yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 60 - 62 deg C @1mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H10N2
Molecular Weight: 122

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 20173-04-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N-Methyl-N-(3-pyridylmethyl)amine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Amines, Liquid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: Amines, Liquid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: Amines, Liquid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 20173-04-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 20173-04-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 20173-04-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/10/2003 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Synphase ps l-series lanterns - backbone amide linker, 15 ??6mol
Methyl 3-methoxyacrylate, 95% 34846-90-7
Synphase ps l-series lanterns - chloromethylated, 15 ??6mol
Synphase ps l-series lanterns - hydroxymethylphenoxy linker, 15 ??6mol
Potassium peroxomonosulfate compound, min. 4.5% active oxygen 37222-66-5
4-Benzyloxy-3-Pyrrolin-2-One, 96%(TLC) 113896-95-0
3-(2-(2-Maleimidoethoxy)ethyl-Carbamoyl)- Proxyl, Free Radical 68407-07-8
Synphase ps l-series lanterns - hydroxymethylated, 15 ??6mol
Synphase ps l-series lanterns - hyperlabile linker, 15 ??6mol
Synphase ps l-series lanterns - hyperlabile linker,15 ??6mol
Synphase ps l-series lanterns - rink amide linker, 15 ??6mol
2-(Aminomethyl)-1-Ethylpyrrolidine, 95% 26116-12-1
Synphase ps a-series lanterns - hydroxymethylated, 75 ??6mol
Synphase ps a-series lanterns - hyperlabile linker, 75 ??6mol
Jumbo color pack (assorted spindle i, spindle ii and cogs)x8 colors
Standard color pack (assorted spindle i, spindleii and cogs)x8 colors
Transtems
Transponders
Stemholders with stems - red
4-O-Methyldopamine Hydrochloride, 98% 645-33-0
2-Ethylhexyl methacrylate 688-84-6
2-Isopropylanisole 2944-47-0
Methyl 5-chloro-2-hydroxybenzoate, 97% 4068-78-4
Methyl 2,6-dichloroisonicotinate, 97% 42521-09-5
(4-Fluorophenyl)(4-piperidyl)methanone hydrochloride, 97% 25519-78-2
2-Chloro-6-methoxy-3-nitropyridine, 97% 38533-61-8
3,5-Dimethyl-1h-pyrazole-1-carboximidamidenitrate, 97% 38184-47-3
2,6-Dichloropyridin-3-amine, 97% 62476-56-6
Quinoline-4-carboxylic acid, 97% 486-74-8
2-Ethoxy-5-prop-1-enylphenol, 97% 94-86-0
2-(Trifluoromethyl)benzaldehyde 447-61-0
Methyl 4,5-dimethoxy-2-nitrobenzoate, 97% 26791-93-5
5-Nitroindoline, 97% 32692-19-6
Cellulose sulfate, sodium salt 9005-22-5
Ethyl 1-methylcyclopropane-1-carboxylate, 97% 71441-76-4
2-Amino-4-methylbenzonitrile, 97% 26830-96-6
4-Methoxy-1,3-benzothiazol-2-amine, tech 5464-79-9
4-(tert-Butyl)-n,n-dimethylaniline, 97% 2909-79-7
2-Ethylbutylamine, 97% 617-79-8
4-Methylthiosemicarbazide, 98% 6610-29-3
1-(3,4-Dichlorophenyl)hydrazine hydrochloride, 97% 19763-90-7
3-Furylmethanol, 97% 4412-91-3
5-Chloro-7-iodoquinolin-8-ol, 97% 130-26-7
2-[([5-[(Dimethylamino)methyl]-2-furyl]methyl)thio]ethan-1-amine, 66356-53-4
N-Methyl-N-(3-pyridylmethyl)amine, TECH 20173-04-0
5-(Chloromethyl)-1,3-benzodioxole,90+% 20850-43-5
8-Quinolinesulfonyl chloride, 97% 18704-37-5
4-(4-Bromophenyl)-2-methylpyrimidine, 97% 499785-50-1
2-Butyn-1-Ol, 95% 764-01-2
3-Acetyl-6,8-dichloro-2H-chromen-2-one, 97% 2199-91-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net