Search   
MSDS 
:
 Methyl 3-methoxyacrylate, 95%
CAS 
:
 34846-90-7
SYNONYMS 
:
 2-Propenoic acid, 3-methoxy-, methyl ester.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 34846-90-7 |Methyl 3-methoxyacrylate | 95 | 412-900-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38 43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin. May cause
sensitization by skin contact.

Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears).
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, immediately flush skin with soap and plenty of
water. Remove contaminated clothing and shoes. Get medical aid if
symptoms occur. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Fire or
excessive heat may result in violent rupture of the container due to
bulk polymerization. Combustible liquid and vapor.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation. Keep away from heat and flame.
Storage:
Keep away from sources of ignition. Keep refrigerated. (Store below
4C/39F.) Store in a tightly closed container. Store in a cool,
dry, well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 34846-90-7:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 20 mm Hg @ 65 deg C
Viscosity: 1.68 cP 20.00 deg
Boiling Point: 169 deg C @ 760 mmHg
Freezing/Melting Point: 3 - 4 deg C
Autoignition Temperature: Not available.
Flash Point: 65 deg C ( 149.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0700g/cm3
Molecular Formula: C5H8O3
Molecular Weight: 116.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
May polymerize.
Conditions to Avoid:
High temperatures, ignition sources.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 34846-90-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl 3-methoxyacrylate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 34846-90-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 34846-90-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 34846-90-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/23/1998 Revision #3 Date: 6/07/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Synphase ps l-series lanterns - backbone amide linker, 15 ??6mol
Methyl 3-methoxyacrylate, 95% 34846-90-7
Synphase ps l-series lanterns - chloromethylated, 15 ??6mol
Synphase ps l-series lanterns - hydroxymethylphenoxy linker, 15 ??6mol
Potassium peroxomonosulfate compound, min. 4.5% active oxygen 37222-66-5
4-Benzyloxy-3-Pyrrolin-2-One, 96%(TLC) 113896-95-0
3-(2-(2-Maleimidoethoxy)ethyl-Carbamoyl)- Proxyl, Free Radical 68407-07-8
Synphase ps l-series lanterns - hydroxymethylated, 15 ??6mol
Synphase ps l-series lanterns - hyperlabile linker, 15 ??6mol
Synphase ps l-series lanterns - hyperlabile linker,15 ??6mol
Synphase ps l-series lanterns - rink amide linker, 15 ??6mol
2-(Aminomethyl)-1-Ethylpyrrolidine, 95% 26116-12-1
Synphase ps a-series lanterns - hydroxymethylated, 75 ??6mol
Synphase ps a-series lanterns - hyperlabile linker, 75 ??6mol
Jumbo color pack (assorted spindle i, spindle ii and cogs)x8 colors
Standard color pack (assorted spindle i, spindleii and cogs)x8 colors
Transtems
Transponders
Stemholders with stems - red
4-O-Methyldopamine Hydrochloride, 98% 645-33-0
2-Ethylhexyl methacrylate 688-84-6
2-Isopropylanisole 2944-47-0
Methyl 5-chloro-2-hydroxybenzoate, 97% 4068-78-4
Methyl 2,6-dichloroisonicotinate, 97% 42521-09-5
(4-Fluorophenyl)(4-piperidyl)methanone hydrochloride, 97% 25519-78-2
2-Chloro-6-methoxy-3-nitropyridine, 97% 38533-61-8
3,5-Dimethyl-1h-pyrazole-1-carboximidamidenitrate, 97% 38184-47-3
2,6-Dichloropyridin-3-amine, 97% 62476-56-6
Quinoline-4-carboxylic acid, 97% 486-74-8
2-Ethoxy-5-prop-1-enylphenol, 97% 94-86-0
2-(Trifluoromethyl)benzaldehyde 447-61-0
Methyl 4,5-dimethoxy-2-nitrobenzoate, 97% 26791-93-5
5-Nitroindoline, 97% 32692-19-6
Cellulose sulfate, sodium salt 9005-22-5
Ethyl 1-methylcyclopropane-1-carboxylate, 97% 71441-76-4
2-Amino-4-methylbenzonitrile, 97% 26830-96-6
4-Methoxy-1,3-benzothiazol-2-amine, tech 5464-79-9
4-(tert-Butyl)-n,n-dimethylaniline, 97% 2909-79-7
2-Ethylbutylamine, 97% 617-79-8
4-Methylthiosemicarbazide, 98% 6610-29-3
1-(3,4-Dichlorophenyl)hydrazine hydrochloride, 97% 19763-90-7
3-Furylmethanol, 97% 4412-91-3
5-Chloro-7-iodoquinolin-8-ol, 97% 130-26-7
2-[([5-[(Dimethylamino)methyl]-2-furyl]methyl)thio]ethan-1-amine, 66356-53-4
N-Methyl-N-(3-pyridylmethyl)amine, TECH 20173-04-0
5-(Chloromethyl)-1,3-benzodioxole,90+% 20850-43-5
8-Quinolinesulfonyl chloride, 97% 18704-37-5
4-(4-Bromophenyl)-2-methylpyrimidine, 97% 499785-50-1
2-Butyn-1-Ol, 95% 764-01-2
3-Acetyl-6,8-dichloro-2H-chromen-2-one, 97% 2199-91-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net