Search   
MSDS 
:
 Methyl 2,3-Dichlorobenzoate, 97%
CAS 
:
 2905-54-6
SYNONYMS 
:
 2,3-Dichlorobenzoic Acid Methyl Ester.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2905-54-6 |Methyl 2,3-Dichlorobenzoate | 97% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decomposition or combustion.
Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation. Use
with adequate ventilation. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2905-54-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: colorless - pale yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 35 - 39 deg C
Autoignition Temperature: Not available.
Flash Point: 110 deg C ( 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: C8H6Cl2O2
Molecular Weight: 205.04

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2905-54-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Methyl 2,3-Dichlorobenzoate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 2905-54-6: No information available.
Canada
CAS# 2905-54-6 is listed on Canada's NDSL List.
CAS# 2905-54-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2905-54-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/02/2000 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Barbituric Acid 67-52-7
3-Carboxypropyl triphenylphosphonium bromide, 97% 17857-14-6
Triphenylphosphine Hydroiodide 0-01-1
2-Amino-5-Nitrobenzoic Acid, 98% 616-79-5
Methyl 2,3-Dichlorobenzoate, 97% 2905-54-6
4-Bromobutyl triphenylphosphonium bromide, 97% 7333-63-3
4-Nitrobenzyl triphenylphosphonium bromide, 97% 2767-70-6
Cyanomethyl triphenylphosphonium chloride, 97% 4336-70-3
Triacontane, 98% 638-68-6
tert-Butoxycarbonylmethyl triphenylphosphonium bromide, 97% 59159-39-6
2,3,4,5,6-Pentabromobenzyl alcohol, 97% 79415-41-1
Acenaphthylene 208-96-8
5-Chlorothiophenesulphonyl chloride, 96% 2766-74-7
P-Bromophenoxyacetic Acid, 97% 1878-91-7
5-Bromothiophenesulphonyl chloride, 96% 55854-46-1
Methyl 5-Acetylsalicylate, 98% 16475-90-4
Barium acetate 543-80-6
Ibuprofen, 99% 15687-27-1
4,5-Dimethylthiophene-2-carboxaldehyde, 97% 0-01-1
(S)-1,2,4-Butanetriol, 95%, (99% e.e.) 42890-76-6
Ethyl (R)-4-cyano-3-hydroxybutanoate, 99% 141942-85-0
3-Methyl-2-furoic acid, 98% 4412-96-8
p-Acetaminobenzaldehyde, 97% 0-01-1
(S)-1,4-Dibromo-2-Butanol, 96% 64028-90-6
N,N'-Difluoro-2,2'-bipyridinium bis(tetrafluoroborate) 178439-26-4
4-Amino-6-methoxypyrimidine, 98% 0-01-1
Captopril, 98% 62571-86-2
Methyl (S)-(+)-3-Hydroxybutyrate, 99% 53562-86-0
2,5-Dimethoxybenzoic Acid, 98% 2785-98-0
Thallium (I) trifluoroacetylacetonate, 97% 54412-40-7
2-Methyl-2-Adamantanol, 98% 702-98-7
3-Noradmantanecarboxylic Acid, 98% 16200-53-6
Resorcin Blue 42249-61-6
Methylene violet 3RAX 4569-86-2
DL-allo-Threonine, 98% 0-01-1
1-Chloro-3,4-difluorobenzene, 99% 696-02-6
Methyl Red hydrochloride, reagent ACS 63451-28-5
Fast Sulphon Black F 3682-47-1
Methyl 5-nitro-2-furoate, 97% 1874-23-3
N-Aminohomopiperidine, 95% 5906-35-4
DOTAP mesylate 144139-73-1
Leishman stain 12627-53-1
1-Ethyl-2-iodobenzene, 98% 18282-40-1
Patent Blue V 3536-49-0
3-Methyl-1-penten-4-yn-3-ol, 99% 3230-69-1
Chelidamic Acid Monohydrate 138-60-3
N-Acetylethanolamine 142-26-7
Tetrahydrofuran-2,3,4,5-tetracarboxylic acid 26106-63-8
2,3,5,6-Tetramethyl-P-Phenylenediamine 3102-87-2
(S)-(+)-N-Alpha-Benzyl-N-Beta-BOC-L-Hydrazinoleucine 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net