Search   
MSDS 
:
 Fast Sulphon Black F
CAS 
:
 3682-47-1
SYNONYMS 
:
 Acid Black 32C.I. 26990
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3682-47-1 |Fast Sulphon Black F | ca 100 | 222-966-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 3682-47-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: black
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C30H17N4Na3O11S3
Molecular Weight: 774.63

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, sulfur oxides (SOx), including sulfur oxide
and sulfur dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3682-47-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Fast Sulphon Black F -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 3682-47-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 3682-47-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3682-47-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/03/2000 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Barbituric Acid 67-52-7
3-Carboxypropyl triphenylphosphonium bromide, 97% 17857-14-6
Triphenylphosphine Hydroiodide 0-01-1
2-Amino-5-Nitrobenzoic Acid, 98% 616-79-5
Methyl 2,3-Dichlorobenzoate, 97% 2905-54-6
4-Bromobutyl triphenylphosphonium bromide, 97% 7333-63-3
4-Nitrobenzyl triphenylphosphonium bromide, 97% 2767-70-6
Cyanomethyl triphenylphosphonium chloride, 97% 4336-70-3
Triacontane, 98% 638-68-6
tert-Butoxycarbonylmethyl triphenylphosphonium bromide, 97% 59159-39-6
2,3,4,5,6-Pentabromobenzyl alcohol, 97% 79415-41-1
Acenaphthylene 208-96-8
5-Chlorothiophenesulphonyl chloride, 96% 2766-74-7
P-Bromophenoxyacetic Acid, 97% 1878-91-7
5-Bromothiophenesulphonyl chloride, 96% 55854-46-1
Methyl 5-Acetylsalicylate, 98% 16475-90-4
Barium acetate 543-80-6
Ibuprofen, 99% 15687-27-1
4,5-Dimethylthiophene-2-carboxaldehyde, 97% 0-01-1
(S)-1,2,4-Butanetriol, 95%, (99% e.e.) 42890-76-6
Ethyl (R)-4-cyano-3-hydroxybutanoate, 99% 141942-85-0
3-Methyl-2-furoic acid, 98% 4412-96-8
p-Acetaminobenzaldehyde, 97% 0-01-1
(S)-1,4-Dibromo-2-Butanol, 96% 64028-90-6
N,N'-Difluoro-2,2'-bipyridinium bis(tetrafluoroborate) 178439-26-4
4-Amino-6-methoxypyrimidine, 98% 0-01-1
Captopril, 98% 62571-86-2
Methyl (S)-(+)-3-Hydroxybutyrate, 99% 53562-86-0
2,5-Dimethoxybenzoic Acid, 98% 2785-98-0
Thallium (I) trifluoroacetylacetonate, 97% 54412-40-7
2-Methyl-2-Adamantanol, 98% 702-98-7
3-Noradmantanecarboxylic Acid, 98% 16200-53-6
Resorcin Blue 42249-61-6
Methylene violet 3RAX 4569-86-2
DL-allo-Threonine, 98% 0-01-1
1-Chloro-3,4-difluorobenzene, 99% 696-02-6
Methyl Red hydrochloride, reagent ACS 63451-28-5
Fast Sulphon Black F 3682-47-1
Methyl 5-nitro-2-furoate, 97% 1874-23-3
N-Aminohomopiperidine, 95% 5906-35-4
DOTAP mesylate 144139-73-1
Leishman stain 12627-53-1
1-Ethyl-2-iodobenzene, 98% 18282-40-1
Patent Blue V 3536-49-0
3-Methyl-1-penten-4-yn-3-ol, 99% 3230-69-1
Chelidamic Acid Monohydrate 138-60-3
N-Acetylethanolamine 142-26-7
Tetrahydrofuran-2,3,4,5-tetracarboxylic acid 26106-63-8
2,3,5,6-Tetramethyl-P-Phenylenediamine 3102-87-2
(S)-(+)-N-Alpha-Benzyl-N-Beta-BOC-L-Hydrazinoleucine 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net