Search   
MSDS 
:
 Spermidine trihydrochloride, 99+%
CAS 
:
 334-50-9
SYNONYMS 
:
 N-(3-Aminopropyl)-1,4-butanediamine trihydrochloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 334-50-9 |Spermidine trihydrochloride | >99 | 206-379-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid breathing
dust.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Deep freeze
(below -20C). Store protected from moisture. Storage under inert gas
has been recommended.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 334-50-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: white
Odor: strong odor
pH: 3-6 (aqueous solution)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 257-259 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C7H19N3.3HCl
Molecular Weight: 254.63

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide,
ammonia and/or derivatives.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 334-50-9: EJ7023000
LD50/LC50:
Not available.
Carcinogenicity:
Spermidine trihydrochloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36 Wear suitable protective clothing.
WGK (Water Danger/Protection)
CAS# 334-50-9: No information available.
Canada
CAS# 334-50-9 is listed on Canada's NDSL List.
CAS# 334-50-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 334-50-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/13/1998 Revision #6 Date: 7/23/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
P-Bromophenethylamine, 98% 73918-56-6
Pyridinium Bromide Perbromide, 95 % 39416-48-3
tert-Butylhydrazine hydrochloride, 98% 7400-27-3
(+)-cis-1(r),2(s)-1,2-dihydroxy-1,2,3,4- tetrahydronaphthalene, 98+% 57495-92-8
2-Chloroanisole, 98% 766-51-8
2-Nitrobenzoic acid, 98% (titr.) 552-16-9
Triisopropyl phosphite, tech., 90% 116-17-6
Alpha-Tetralone, 98% 529-34-0
4-Bromophenylacetonitrile, 97% 16532-79-9
Pamoic Acid, Disodium Salt, 98% 6640-22-8
5-Hydroxy-2-Indolecarboxylic Acid, 98% 21598-06-1
Betaine hydrate 17146-86-0
Dimethyl Glutarate, 98% 1119-40-0
4-Bromomethyl-6,7-Dimethoxycoumarin, 95% (Titr.) 88404-25-5
Dysprosium chloride hexahydrate, 99.9% 15059-52-6
Procainamide hydrochloride, 99% 614-39-1
Ethyl Valerate, 99% (GC) 539-82-2
L(-)-Camphor, tech. 464-48-2
(R)-(-)-Phenylsuccinic Acid, 99+% 46292-93-7
L-(+)-2-Amino-6-phosphonohexanoic acid, 98% e.e.
Spermidine trihydrochloride, 99+% 334-50-9
4-Nitrophenylacetic acid, 99% 104-03-0
Platinum on 1/8-inch alumina pellets (0.5% pt) 7440-06-4
2-N-propylthiazole, 99% 17626-75-4
4-(Trifluoromethoxy)benzylamine, 97+% (gc) 93919-56-3
S-Carboxymethyl-L-Cysteine, 98% 638-23-3
Tungstic acid, 99+% 7783-03-1
4-Chloro-3-Nitroanisole 98% 10298-80-3
2-Methyl-1-(3-methylphenyl)piperazine 35947-10-5
3,3',4,4'-Benzophenonetetracarboxylic dianhydride, 99% (titr.) 2421-28-5
4-Nitrophthalonitrile 31643-49-9
1,6-Anhydro-Beta-D-Glucopyranose, 99+% 498-07-7
4-Nitrophenylacetonitrile, 98% 555-21-5
2,2,6,6-Tetramethylpiperidine, 98% 768-66-1
2-Piperidinemethanol, Tech., 93% 3433-37-2
L(-)-Borneol, 98% 464-45-9
3-Chloroaniline, 99% 108-42-9
Diglycolic Acid, 98% 110-99-6
4-n-Dodecylresorcinol, 97% 24305-56-4
Poly(acetal) 66455-31-0
Trimethyl Phosphonoacetate , 98% 5927-18-4
n-Undecane, 99% 1120-21-4
Glutathione, Oxidized (GSSG), Hydrate , 98+% (HPLC) 121-24-4
Zirconium silicate, 99%, -325 Mesh 10101-52-7
Sodium hydrogen selenite, p.a. 7782-82-3
2-Ethoxybenzoic acid, 98% 134-11-2
4-Hydroxybenzyl Cyanide, 98% 14191-95-8
(+)-Dimethyl-2,3-O-isopropylidene-D-tartrate, 97% 37031-30-4
L-5-Hydroxytryptophan, 99% (TLC) 4350-09-8
6-Methoxytryptamine, 99% 3610-36-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net