**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 36405-47-7 |2,2,3,4,4,4-Hexafluorobutyl methacryla| >98 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Light sensitive.Heat
sensitive.
Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears).
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Flammable liquid and vapor. Fire or excessive heat
may result in violent rupture of the container due to bulk
polymerization.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Ground and bond
containers when transferring material. Use spark-proof tools and
explosion proof equipment. Avoid contact with eyes, skin, and
clothing. Keep away from heat, sparks and flame. Avoid breathing
vapor or mist. Pure vapor will be uninhibited and may polymerize in
vents or other confined spaces.
Storage:
Keep away from sources of ignition. Keep refrigerated. (Store below
4C/39F.) Store in a tightly closed container. Store protected from
light.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 36405-47-7:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 158 deg C @ 760 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 56 deg C ( 132.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.34 g/ml
Molecular Formula: C8H8F6O2
Molecular Weight: 250.14
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. May polymerize.
Conditions to Avoid:
Light, ignition sources, excess heat, loss of inhibitor.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong reducing agents, strong bases, strong
acids.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: May occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 36405-47-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,2,3,4,4,4-Hexafluorobutyl methacrylate -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 36405-47-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 36405-47-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 36405-47-7 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/20/2004 Revision #0 Date: Original.
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
2-Hydroxyethyl disulfide, tech., 90%
| 1892-29-1 |
|
Ethyl isodehydroacetate, 95%
| 3385-34-0 |
|
Pentadecafluorooctanoic acid, 96%
| 335-67-1 |
|
p-Nitrobenzyl acetoacetate
| 61312-84-3 |
|
(2S)-Bornane-10,2-sultam, 98%
| 108448-77-7 |
|
Tris(methylthio)methane, 98%
| 5418-86-0 |
|
1-Bromo-2,3,5,6-tetrafluorobenzene, 99%
| 1559-88-2 |
|
??-Carotene, 95%
| 7235-40-7 |
|
1,5-Dihydroxy-1,2,3,4-tetrahydronaphthalene, tech., 90%
| 40771-26-4 |
|
Azure II Eosinate
| 62342-51-2 |
|
2,2,3,4,4,4-Hexafluorobutyl methacrylate, stabilized with 30-70 ppm
| 36405-47-7 |
|
3,4-Dichlorobenzoic acid, 98+%
| 51-44-5 |
|
Sodium biphenyl, reagent, 13% w/w solution in diethylene glycol
| 112-36-7 |
|
3,5-Dichloroanisole, 98%
| 33719-74-3 |
|
Glyceryl triundecanoate, 99%
| 13552-80-2 |
|
3,5-Dibromophenylboronic acid, 97%
| 117695-55-3 |
|
N-(Diphenylmethylene)glycerine tert-butyl ester, 98%
| 81477-94-3 |
|
(S)-2-Methyl-CBS-oxazaborolidine, 1M solut ion in toluene
| 108-88-3 |
|
(R)-2-Methyl-CBS-oxazaborolidine, 1M solution in toluene
| 108-88-3 |
|
tert-Butyl (R)-(+)-4-formyl-2,2-dimethyl-3-oxazolidinecarboxylate
| 95715-87-0 |
|
Potassium tert-butoxide, 1.0M solution in tetrahydrofuran
| 109-99-9 |
|
N-Dodecyl-dioxyethylene
| 3055-93-4 |
|
Cholesterol cell culture tested in methyl- beta-cyclodextrin, 40mg
| 00-01-1 |
|
Oleic acid cell culture tested in methyl-beta-cyclodextrin, 30mg per
| 00-01-1 |
|
5-Hydroxytryptamine adipate
| 16031-83-7 |
|
1-(5-Chloro-2-hydroxy-4-methylphenyl)-3-phenyl-1,3-propanedione
| 5067-23-2 |
|
1-(5-Bromo-2-hydroxyphenyl)-3-phenyl-1,3-propanedione
| 5067-24-3 |
|
1-(5-Chloro-2-hydroxyphenyl)-3-phenyl-1,3-propanedione
| 5067-25-4 |
|
1-(2-Hydroxy-5-methylphenyl)-3-phenyl-1,3-propanedione
| 29976-82-7 |
|
4-Methyl-2-pentenoic acid, 97%
| 10321-71-8 |
|
Methyl 2-pentenoate, 97%
| 818-59-7 |
|
8-Benzyl-4-oxo-phenyl-1,3,8-triazaspiro[4, 5]decane, 99%
| 974-41-4 |
|
4-Isopropylcinnamic acid, 98%
| 3368-21-6 |
|
Chlorogenic Acid, 99% Predominantly Trans (Ex Coffee Seeds)
| 327-97-9 |
|
2-Chloro-6-fluorocinnamic acid, 98%
| 392-22-3 |
|
2,4-Dichlorocinnamic acid, 98%
| 20595-45-3 |
|
Octadecyl Isothiocyanate (Pract)
| 2877-26-1 |
|
1-(2-Hydroxylphenyl)-3-phenyl-1,3-propanedione
| 1469-94-9 |
|
1,1'-(4,6-Dihydroxy-1,3-phenylene)bisethanone
| 2161-85-5 |
|
2,4'-Dibromopropiophenone
| 38786-67-3 |
|
4-Chloro-2-(1H-pyrazol-3-yl)phenol
| 18704-67-1 |
|
Benzyl 2,4-dihydroxyphenyl ketone
| 3669-41-8 |
|
(1S,2R)-(-)-cis-2-(Benzylamino)cyclohexane methanol
| 71581-93-6 |
|
(1R,2S)-(+)-cis-2-(Benzylamino)cyclohexane methanol
| 71581-92-5 |
|
5-Bromo-2-methoxycinnamic acid, 97%
| 40803-53-0 |
|
(2,3-Dimethylphenoxy)acetic acid, 98%
| 2935-63-9 |
|
trans-(4-Ethoxybenzoyl)-3-acrylic acid, 98%
| 29582-31-8 |
|
5-Bromo-2-ethoxybenzaldehyde, 98%
| 79636-94-5 |
|
3-(Dimethylamino)propionitrile, 98%
| 1738-25-6 |
|
2-Hydroxychalcone, 98%
| 644-78-0 |
|
|