Search   
MSDS 
:
 Hypophosphorous Acid, 50 wt%  Solution in Water
CAS 
:
 7732-18-5
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6303-21-5 |HYPOPHOSPHORUS ACID | 50 | 228-601-5 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |Water | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
May cause irreversible eye injury. Contact with liquid is
corrosive to the eyes and causes severe burns.
Skin:
Contact with liquid is corrosive and causes severe burns and
ulceration.
Ingestion:
Causes severe pain, nausea, vomiting, diarrhea, and shock. May cause
hemorrhaging of the digestive tract. May cause corrosion and
permanent tissue destruction of the esophagus and digestive tract.
Inhalation:
Irritation may lead to chemical pneumonitis and pulmonary edema.
Causes severe irritation of upper respiratory tract with coughing,
burns, breathing difficulty, and possible coma.
Chronic:
Prolonged inhalation may cause respiratory tract inflammation and
lung damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
soap and water for at least 15 minutes while removing contaminated
clothing and shoes. Wash clothing before reuse. Destroy contaminated
shoes.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air
immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
During a fire, irritating and highly toxic gases may be generated by
thermal decomposition or combustion. Use water spray to keep
fire-exposed containers cool. Wear appropriate protective clothing
to prevent contact with skin and eyes. Wear a self-contained
breathing apparatus (SCBA) to prevent contact with thermal
decomposition products. Containers may explode if exposed to fire.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam. Cool containers with flooding quantities of water
until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Cover with sand, dry lime or soda ash and place in
a closed container for disposal. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Keep container tightly closed. Do not get on skin or in eyes. Do not
ingest or inhale. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134 or European Standard EN 149. Always use a
NIOSH or European Standard EN 149 approved respirator
when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Appearance: clear, colorless
Odor: Odorless.
pH: Not available.
Vapor Pressure: 30 mbar @20C
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density: 1.2740g/cm3
Molecular Formula: H3O2P
Molecular Weight: 66.00

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, temperatures above 100C, bases.
Incompatibilities with Other Materials:
Reacts violently with oxicdizing agents and mercury (II) nitrate;
reacts explosively with mercury (II) oxide. Causes exothermic
reations with aldehydes, amines, amides, alcohols and glycols,
azo-compounds, carbamates, esters, caustics, phenols and cresols,
ketones, organophosphates, epoxides, explosives, combustible
materials, unsaturated halides, and organic peroxides. Forms
flammable gases with sulfides, mercaptans, cyanides, and aldehydes.
Also forms toxic fumes with cyanides, sulfides, fluorides, organic
peroxides, and halogenated organics. Hot, dilute phosphoric acid
reacts with nickel carbonate to form trinickel orthphosphate.
Mixtures with nitromethane are explosive.
Hazardous Decomposition Products:
Phosphine, oxides of phosphorus, phosphoric acid.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6303-21-5 unlisted.
CAS# 7732-18-5: ZC0110000
LD50/LC50:
Not available.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
HYPOPHOSPHORUS ACID -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Water -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Shore crab LC50=240 mg/L/48H Chronic plant toxicity=100 ppm

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3264
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3264
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.
Dangerous Goods Code: 8(17B)
UN Number: 3264

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
WGK (Water Danger/Protection)
CAS# 6303-21-5: No information available.
CAS# 7732-18-5: No information available.
United Kingdom Occupational Exposure Limits

Canada
CAS# 6303-21-5 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 6303-21-5 is not listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 6303-21-5 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/17/1998 Revision #1 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-(Piperidylmethyl)-1-Cyclohexanone Hydrochloride, 98% 6966-09-2
Fluorosilicic Acid (25 Wt % Aqueous Solution) 7732-18-5
(S)-(-)-Bupivacaine hydrochloride, 99% 27262-48-2
6,7-Diethoxy-3,4-Dihydroisoquinoline-1(2H)-Thione, 98% 0-01-1
Sodium phosphate, dibasic anhydrous, reagent ACS 7558-79-4
1-Nonanol 143-08-8
2-Acetyl-6,7-Dimethoxy-1-Methylene-1,2,3,4-Tetrahydroisoquinoline, 57621-04-2
Lithium methoxide, 10% solution in methanol 865-34-9
[(3S)-4-Azabicyclo[4.4.0]Dec-3-yl]-N-(Tert-Butyl)Carboxamide, 99% 136465-81-1
C-Benzylcalix(4)resorcinarene 0-01-1
(S)-(-)-2-(2'-Carbomethoxyethyl)-2-Methyl-Cyclohexanone, 98.5+% 112898-44-9
(S)-(-)-alpha-Amino-gamma-butyrolactone hydrochloride, 98% 2185-03-7
N-Benzylmaleimide 1631-26-1
4-(Methylamino)benzoic acid, 97% 10541-83-0
Ethyl (3S)-3-Hydroxybutyrate, 99% 56816-01-4
Hydrofluoric Acid (48-51%), Reagent ACS 7664-39-3
ETHYL (1R,2S)-2-HYDROXYCYCLOHEXANECARBOXYLATE 61586-78-5
Iodic Acid, Reagent ACS (Crystals), 99.5% (Titr.) 7782-68-5
3-Pyrazolidinone Hydrochloride 1752-88-1
Tritylphenol 978-86-9
4-Hydroxy-2-Methoxybenzaldehyde, 98% 18278-34-7
4-Nitrobiphenyl, 98% 92-93-3
6-Iodo-2-picolin-5-ol, 97% 23003-30-7
Ethyl 100491-29-0
D(+)-Carnitine, 98% 541-14-0
D(+)-Carnitinenitrile Chloride, 97% 0-01-1
5-Amino-o-Cresol, 97% 2835-95-2
Hydrogen Peroxide (30% in Water) (Without Stabilizer), Reagent ACS 7722-84-1
4-Amino-o-Cresol, 97% 2635-95-2
Hydroquinone, p.a. 123-31-9
2,3-Difluoro-6-nitrophenol, 97% 82419-26-9
Hydroxylamine Sulfate, 99% 10039-54-0
Hypophosphorous Acid, 50 wt% Solution in Water 7732-18-5
cis-2-Heptene, 97% 6443-92-1
Imidazole 288-32-4
3-Amino-3-Cyclohexylpropionic Acid, 98% 129042-71-3
3-Fluorophenylacetic Acid, 98%(GC) 331-25-9
3-Benzylaminobutyric Acid, 98% 14676-01-8
4-NITROTHIOPHENOL, TECH., 80+% 1849-36-1
ALPHA,ALPHA-DIPHENYLGLYCINE, 98% 3060-50-2
Zirconium(IV) ethoxide, 99% 18267-08-8
Celite high-purity analytical grade 61790-53-2
2-CYANOETHYLHYDRAZINE, 98% 353-07-1
Pentamethylbenzaldehyde, 96% 17432-38-1
4-Chloro-3-nitrobenzenesulfonic acid, sodium salt, 98% (tlc) 17691-19-9
cis-2-Benzylaminomethyl-1-Cyclohexanol Hydrochloride, 98% 77612-17-0
Iron, electrolytically reduced, reagent (powder) 7439-89-6
1-(Gamma-Hydroxypropyl)-6,7-Dimethoxy-1,2,3,4-Tetrahydroisoquinoline 0-01-1
Iron (III) Oxide, 99.999%, -100 Mesh 1309-37-1
Perfluoroadipic acid hydrate, 98% 123334-02-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net