Search   
MSDS 
:
 Lithium methoxide, 10% solution in methanol
CAS 
:
 865-34-9
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 865-34-9 |Lithium methoxide, 10% solution in met| 10% | 212-737-7 |
| |hanol | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T F
Risk Phrases: 11 14 23/25 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Reacts violently with water. Toxic by inhalation
and if swallowed. Causes burns.Air sensitive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Poison by ingestion. Causes gastrointestinal tract burns. The
toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Inhalation may be fatal as a result of spasm,
inflammation, edema of the larynx and bronchi, chemical pneumonitis
and pulmonary edema. Toxic if inhaled.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Containers may explode in the heat of a fire. Flammable liquid
and vapor.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use spark-proof tools and explosion proof equipment. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Use and store under nitrogen. Do not allow contact with
water. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Keep under a nitrogen blanket.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 865-34-9:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 11 deg C ( 51.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: CH3OLi
Molecular Weight: 37.97

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, moisture, exposure to air, excess heat.
Incompatibilities with Other Materials:
Water, oxidizing agents, reducing agents, acids, acid chlorides,
alkali metals, halogens, acid anhydrides.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, oxides of lithium.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 865-34-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Lithium methoxide, 10% solution in methanol -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T F
Risk Phrases:
R 11 Highly flammable.
R 14 Reacts violently with water.
R 23/25 Toxic by inhalation and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 8 Keep container dry.
S 16 Keep away from sources of ignition - No
smoking.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 865-34-9: No information available.
Canada
CAS# 865-34-9 is listed on Canada's NDSL List.
CAS# 865-34-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 865-34-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/04/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-(Piperidylmethyl)-1-Cyclohexanone Hydrochloride, 98% 6966-09-2
Fluorosilicic Acid (25 Wt % Aqueous Solution) 7732-18-5
(S)-(-)-Bupivacaine hydrochloride, 99% 27262-48-2
6,7-Diethoxy-3,4-Dihydroisoquinoline-1(2H)-Thione, 98% 0-01-1
Sodium phosphate, dibasic anhydrous, reagent ACS 7558-79-4
1-Nonanol 143-08-8
2-Acetyl-6,7-Dimethoxy-1-Methylene-1,2,3,4-Tetrahydroisoquinoline, 57621-04-2
Lithium methoxide, 10% solution in methanol 865-34-9
[(3S)-4-Azabicyclo[4.4.0]Dec-3-yl]-N-(Tert-Butyl)Carboxamide, 99% 136465-81-1
C-Benzylcalix(4)resorcinarene 0-01-1
(S)-(-)-2-(2'-Carbomethoxyethyl)-2-Methyl-Cyclohexanone, 98.5+% 112898-44-9
(S)-(-)-alpha-Amino-gamma-butyrolactone hydrochloride, 98% 2185-03-7
N-Benzylmaleimide 1631-26-1
4-(Methylamino)benzoic acid, 97% 10541-83-0
Ethyl (3S)-3-Hydroxybutyrate, 99% 56816-01-4
Hydrofluoric Acid (48-51%), Reagent ACS 7664-39-3
ETHYL (1R,2S)-2-HYDROXYCYCLOHEXANECARBOXYLATE 61586-78-5
Iodic Acid, Reagent ACS (Crystals), 99.5% (Titr.) 7782-68-5
3-Pyrazolidinone Hydrochloride 1752-88-1
Tritylphenol 978-86-9
4-Hydroxy-2-Methoxybenzaldehyde, 98% 18278-34-7
4-Nitrobiphenyl, 98% 92-93-3
6-Iodo-2-picolin-5-ol, 97% 23003-30-7
Ethyl 100491-29-0
D(+)-Carnitine, 98% 541-14-0
D(+)-Carnitinenitrile Chloride, 97% 0-01-1
5-Amino-o-Cresol, 97% 2835-95-2
Hydrogen Peroxide (30% in Water) (Without Stabilizer), Reagent ACS 7722-84-1
4-Amino-o-Cresol, 97% 2635-95-2
Hydroquinone, p.a. 123-31-9
2,3-Difluoro-6-nitrophenol, 97% 82419-26-9
Hydroxylamine Sulfate, 99% 10039-54-0
Hypophosphorous Acid, 50 wt% Solution in Water 7732-18-5
cis-2-Heptene, 97% 6443-92-1
Imidazole 288-32-4
3-Amino-3-Cyclohexylpropionic Acid, 98% 129042-71-3
3-Fluorophenylacetic Acid, 98%(GC) 331-25-9
3-Benzylaminobutyric Acid, 98% 14676-01-8
4-NITROTHIOPHENOL, TECH., 80+% 1849-36-1
ALPHA,ALPHA-DIPHENYLGLYCINE, 98% 3060-50-2
Zirconium(IV) ethoxide, 99% 18267-08-8
Celite high-purity analytical grade 61790-53-2
2-CYANOETHYLHYDRAZINE, 98% 353-07-1
Pentamethylbenzaldehyde, 96% 17432-38-1
4-Chloro-3-nitrobenzenesulfonic acid, sodium salt, 98% (tlc) 17691-19-9
cis-2-Benzylaminomethyl-1-Cyclohexanol Hydrochloride, 98% 77612-17-0
Iron, electrolytically reduced, reagent (powder) 7439-89-6
1-(Gamma-Hydroxypropyl)-6,7-Dimethoxy-1,2,3,4-Tetrahydroisoquinoline 0-01-1
Iron (III) Oxide, 99.999%, -100 Mesh 1309-37-1
Perfluoroadipic acid hydrate, 98% 123334-02-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net