Search   
MSDS 
:
 Salicylaldehyde
CAS 
:
 90-02-8
SYNONYMS 
:
 O-Hydroxy-Benzaldehyde, 2-Formylphenol, Salicylal.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 90-02-8 |Salicylaldehyde | 100.0 | 201-961-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed.

Potential Health Effects
Eye:
Contact with liquid or vapor causes severe burns and possible
irreversible eye damage. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes severe skin irritation. May cause liver and kidney damage.
May cause skin discoloration. May cause cyanosis of the extremities.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. May also cause pallor, loss of appetite, nausea,
vomiting, diarrhea, weakness, darkened urine, headache, sweating,
convulsions, cyanosis (bluish skin due to deficient oxygenation of
the blood), unconsciousness, fatigue, pulmonary edema & coma.
Inhalation at high concentrations may cause CNS depression and
asphixiation.
Chronic:
May cause liver and kidney damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Discard contaminated clothing in a manner which limits further
exposure.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Do not get in eyes, on skin, or on clothing. Empty containers retain
product residue, (liquid and/or vapor), and can be dangerous. Keep
container tightly closed. Keep away from heat, sparks and flame. Do
not ingest or inhale. Wash clothing before reuse. Do not pressurize,
cut, weld, braze, solder, drill, grind, or expose empty containers to
heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Keep from contact
with oxidizing materials. Store in a cool, dry, well-ventilated area
away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 90-02-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless or dark red
Odor: almond-like
pH: Not available.
Vapor Pressure: 1 mmHg @ 33 C
Viscosity: Not available.
Boiling Point: 196 deg C
Freezing/Melting Point: -7.2 deg C
Autoignition Temperature: Not available.
Flash Point: 76 deg C ( 168.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Slightly soluble in water.
Specific Gravity/Density: 1.1674 @ 20C
Molecular Formula: C7H6O2
Molecular Weight: 122.0408

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 90-02-8: VN5250000
LD50/LC50:
CAS# 90-02-8: Dermal, guinea pig: LD50 = 20 mL/kg; Draize test,
rabbit, skin: 500 mg/24H Moderate; Oral, mouse: LD50 = 504 mg/kg;
Oral, rat: LD50 = 520 mg/kg; Skin, rabbit: LD50 = 3 gm/kg; Skin,
rat: LD50 = 600 mg/kg.
Carcinogenicity:
Salicylaldehyde -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Daphnia: Fathead Minnow: EC50=4.0 mg/l; 96-hour; cas#108-95-2Daphnia:
Fathead Minnow: EC50=12.0 mg/l; 48-hour; cas#108-95-296-hour LC50;
fathead minnow: 3.2 uL/L. 96-hour LC50; water flea: 1.0 uL/L.
24-hour LC50; water flea: 6.8 mg/L.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC LIQUID, ORGANIC, NOS
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
IMO
Shipping Name: TOXIC LIQUID, ORGANIC, NOS
Hazard Class: 6.1
UN Number: 2810
Packing Group: III
RID/ADR
Shipping Name: TOXIC LIQUID, ORGANIC, NOS
Hazard Class: 6.1
UN Number: 2810
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 90-02-8: 2
Canada
CAS# 90-02-8 is listed on Canada's DSL List.
CAS# 90-02-8 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 90-02-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/17/1998 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Soda Asbestos (Contains no Natural Asbestos) 0-00-0
Soap Soft Green
Soap Powder Hard
3-Nitrophenylacetonitrile, 99.0% 621-50-1
'Sira' Adhesive Wax
1,5-Dinitronaphthalene 98% 605-71-0
Silicone OV-225 37224-05-8
Silicone OV-210 37224-04-7
Silicone OV-101 37224-03-6
Quadralene 3000 25155-30-0
Quadralene 2000
Quadralene 1000 Powder
Quinhydrone 106-34-3
Silicone Antifoaming Agent
Silicon Metal Lump 7440-21-3
Silicone OV-25 37224-02-5
Silica Gel 7646-79-9
Diethyl aminomalonate Hydrochloride, 98% 13433-00-6
Silicone OV-17 37224-01-4
Silicone OV-1 37224-00-3
d-Leucine, 99% 328-38-1
Silica Analyser Reducing Solution 55-55-0
Molybdate Solution 7664-41-7
4,6-Nonanedione, 99% (gc) 14090-88-1
Ringer's Solution Tablets 744-55-8
Rhodizonic Acid Sodium Salt 523-21-7
Oxamide 471-46-5
Resin
Resazurin Tablets 5508-82-3
Raffinose Hydrate 512-69-6
Silver Oxide 20667-12-3
Ascorbate reduction solution 64-18-6
First Acid Solution 77-92-9
5-Ethyl-2-methyl-pyridine, 98% 104-90-5
Reduction Solution 130-14-3
Silica Analyser Solution No.3 7664-93-9
Ammonium Molybdate Solution 7732-18-5
L(+) Rhamnose Monohydrate 10030-85-0
Silicon tetrachloride 10026-04-7
Second Acid Solution 77-92-9
Silica Analyser Solution No. 2 7664-41-7
Silica Analyser Solution No. 1 55-55-0
DL-Serine 302-84-1
Sebacic acid 111-20-6
Salicin 138-52-3
Saccharin Sodium 128-44-9
Saponin 8047-15-2
Salicylaldehyde 90-02-8
Salicylaldoxime 94-67-7
Saccharin 81-07-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net