RICHARD'S PAINT MANUFACTURING -- 5-777 WHITE ALKYD SEMI-GLOSS ENAMEL
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BBJCP
MSDS NAME: 5-777 WHITE ALKYD SEMI-GLOSS ENAMEL
Responsible Party
Name: RICHARD'S PAINT MANUFACTURING CO
Address: 200 PAINT STREET
City: ROCKLEDGE FL 32955
Info Phone: 407-636-6200
Emergency Phone Number: 407-636-6200
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: RICHARD'S PAINT MFG. CO INC
Address: 200 PAINT ST.
City: ROCKLEDGE FL 32955
Phone: 407-636-6200
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: LD50 (ORAL RAT) IS UNKNOWN
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE*EYE:SEVERE IRRITATION, TEARING, REDNESS, BLURRED
VISION. SKIN:IRRITATION, DRYING, DEFATTING, DERMATITIS. INHALED:DIZZINESS,
BREATHING DIFFICULTIES, HEADACHE, LOSS OF COORDINATION. INGESTED:G/I I
RRITATION, VOMITING, NAUSEA, DIARRHEA.CHRONIC*NO INFORMATION GIVEN ON MSDS BY
MFR.
Explanation Of Carcinogenicity: MANUFACTURER GAVE NO COMMENTS OTHER THAN THE
ABOVE REFERENCES TO THE THREE LISTINGS.
Signs And Symptions Of Overexposure: ACUTE*EYE:SEVERE IRRITATION, TEARING,
REDNESS, BLURRED VISION. SKIN:IRRITATION, DRYING, DEFATTING, DERMATITIS.
INHALED:DIZZINESS, BREATHING DIFFICULTIES, HEADACHE, LOSS OF COORDINATION.
INGESTED:G/I I RRITATION, VOMITING, NAUSEA, DIARRHEA.
Medical Cond Aggravated By Exposure: ANESTHESIA, RESPIRATORY TRACT IRRITATION,
DERMATITIS.
First Aid: IF IRRITATION PERSISTS OR IS SEVERE, SEE A DOCTOR. EYE:FLUSH
W/WATER 15 MIN. SKIN:WASH WITH SOAP & WATER. INHALED:REMOVE TO FRESH AIR.
AID/RESTORE BREATHING IF NECESSARY. INGESTED:DO NOT INDUCE VOMIT ING. CAN
CAUSE PNEUMONITIS AND PULMONARY EDEMA.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE SOURCES OF IGNITION & PROVIDE VENTILATION.
DIKE SPILL AREA AND COVER WITH INERT ABSORBENT MATERIAL & REMOVE TO
DISPOSAL CONTAINERS, OBSERVE ALL RELEVANT FEDERAL, STATE & LOCAL LAWS FOR
DISPOSAL .
Neutralizing Agent: NO INFORMATION GIVEN ON MSDS BY MFR.
Waste Disposal Methods: CONSULT ALL FEDERAL, STATE & LOCAL HAZARDOUS WASTE
REGULATIONS BEFORE DISPOSING INTO APPROVED HAZARDOUS WASTE LANDFILLS. OBEY
ALL RELEVANT LAWS.
Handling And Storage Precautions: USE NON-SPARKING TOOLS WHEN HANDLING. AVOID
HOT METAL SURFACES. USE IN WELL VENTILATED AREA. KEEP CONTAINER CLOSED WHEN
NOT IN USE.
Other Precautions: KEEP AWAY FROM EXCESSIVE HEAT. NO SMOKING IN AREA OF USE.
PLASTIC UTENSILS SHOULD NOT BE USED. USE ALUMINUM, BRASS OR COPPER TOOLS.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: 106F,41C
Lower Limits: 0.7
Upper Limits: 6.0
Extinguishing Media: FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER
FOG.
Fire Fighting Procedures: RESPIRATORY EQUIPMENT SHOULD BE WORN TO AVOID
INHALATION OF CONCENTRATED VAPORS. WATER SHOULD NOT BE USED, EXCEPT AS FOG TO
KEEP NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard: HANDLE AS A FLAMMABLE LIQUID. VAPORS FORM AN
EXPLOSIVE MIXTURE IN AIR BETWEEN THE UPPER AND LOWER EXPLOSIVE LIMITS WHICH
CAN BE IGNITED BY MANY SOURCES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WHEN SPRAYING THIS MATERIAL USE NIOSH APPROVED
CARTRIDGE RESPIRATOR SUITABLE TO KEEP AIRBORNE MISTS & VAPORS BELOW THE
TIME WEIGHTED VALUE. WHEN IN POORLY VENTILATED AREAS, USE A FRESH AIR
RESPIRATOR OR SELF CONTAINED BREATHING APPARATUS.
Ventilation: GENERAL MECHANICAL VENTILATION OR LOCAL EXHAUST SHOULD BE
SUFFICIENT TO KEEP CONCENTRATIONS BELOW TLV.
Protective Gloves: IMPERMEABLE CHEMICAL HANDLING GLOVES
Eye Protection: CHEM SAFETY GLASSES,GOGGLES,FACE SHIELD
Other Protective Equipment: IMPERMEABLE APRONS AND PROTECTIVE CLOTHING WHENEVER
POSSIBLE TO PREVENT SKIN CONTACT. HEAD CAPS ARE STRONGLY RECOMMENDED
Work Hygienic Practices: EYE WASH STATION AND SAFETY SHOWER IN WORK PLACE ARE
STRONGLY RECOMMENDED.
Supplemental Safety and Health: NONE
=======================================================
Physical/Chemical Properties
=======================================================
HCC: F4
NRC/State LIC No: NONE
B.P. Text: 405F,207C
M.P/F.P Text: UNKNOWN
Decomp Text: UNKNOWN
Vapor Pres: UNKNOWN
Vapor Density: >AIR
Spec Gravity: 1.3
Evaporation Rate & Reference: SLOWER THAN ETHER
Solubility in Water: NON-SOLUBLE
Appearance and Odor: "N/A"
Corrosion Rate: UNKNOWN
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXCESSIVE HEAT, POOR VENTILATION, CORROSIVE
ATMOSPHERE, EXCESSIVE AGING.
Materials To Avoid: ALKALINE MATERIAL, STRONG ACIDS, OXIDIZING AGENTS.
Hazardous Decomposition Products: FORM CARBON MONOXIDE & DIOXIDE; VARIOUS
HYDROCARBONS.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
Transportation Information
=======================================================
Trans ID NO: 8460
MSDS NAME: 5-777 WHITE ALKYD SEMI-GLOSS ENAMEL
MSDS Prepared Date: 02/07/1992
Review Date: 05/25/1994
Tech Entry NOS Shipping Nm: MINERAL SPIRITS
Multiple KIT Number: 0
Review IND: Y
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: LFK
DOT Proper Shipping Name: PAINT RELATED MATERIAL
DOT PSN Modifier: INCLUDING PAINT THINNING, DRYING, REMOVING, OR REDUCING
COMPOUND
Hazard Class: 3
UN ID Num: UN1263
DOT Packaging Group: III
Label: FLAMMABLE LIQUID
Special Provision: B1,B52,T7,T30
Packaging Exception: 150
Non Bulk Pack: 173
Bulk Pack: 242
Max Qty Pass: 60 L
Max Qty Cargo: 220 L
Vessel Stow Req: A
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: LCT
IMO Proper Shipping Name: PAINT OR PAINT RELATED MATERIAL
IMO PSN Modifier: (INCLUDING PAINT, LACQUER, ENAMEL, STAIN, SHELLAC SOLUTIONS,
VARNISH, POLISH, LIQUID FILLER AND LIQUID LACQUER BASE) OR (INCLUDING PAINT
THINNING OR REDUCING COMPOUND) o
IMDG Page Number: 3372
UN Number: 1263
UN Hazard Class: 3.3
IMO Packaging Group: III
Subsidiary Risk Label: -
EMS Number: 3-05
MED First Aid Guide NUM: 310
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: SXM
IATA UN ID Num: 1263
IATA Proper Shipping Name: PAINT RELATED MATERIAL
IATA PSN Modifier: (INCLUDING PAINT THINNING OR REDUCING COMPOUNDS)
IATA UN Class: 3
IATA Label: FLAMMABLE LIQUID
UN Packing Group: III
Packing Note Passenger: 309
Max Quant Pass: 60L
Max Quant Cargo: 220L
Packaging Note Cargo: 310
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: SXH
AFI Proper Shipping Name: PAINT OR PAINT RELATED MATERIAL
AFI PSN Modifier: (INCLUDING PAINT, LACQUER, ENAMEL, STAIN, SHELLAC SOLUTIONS,
VARNISH, POLISH, LIQUID FILLER AND LIQUID LACQUER BASE) OR (INCLUDIN PAINT
THINNING OR REDUCING COMPOUNDS)
AFI Hazard Class: 3
AFI UN ID NUM: UN1263
AFI Packing Group: III
Special Provisions: P5
Back Pack Reference: A7.3
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 5-777 WHITE ALKYD SEMI-GLOSS ENAMEL
Assigned IND: Y
Company: RICHARD'S PAINT MFG. CO INC
Street: 200 PAINT ST.
City: ROCKLEDGE FL
Zipcode: 32955
Health Emergency Phone: 407-636-6200
Label Required IND: Y
Date Of Label Review: 05/25/1994
Status Code: C
MFG Label NO: NONE
Label Date: 05/25/1994
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: **TARGET ORGAN(S):SKIN,EYES,RESPIRATORY SYSTEM,CNS**
ACUTE*EYE:SEVERE IRRITATION, TEARING, REDNESS, BLURRED VISION.
SKIN:IRRITATION, DRYING, DEFATTING, DERMATITIS. INHALED:DIZZINESS, BREATHING
DIFFI CULTIES, HEADACHE, LOST COORDINATION. INGESTED:G/I IRRITATION,
VOMITING, NAUSEA, DIARRHEA. CHRONIC*NOT KNOWN. USE NON-SPARKING TOOLS WHEN
HANDLING. AVOID HOT METAL SURFACES. USE IN WELL VENTILATED AR EA. KEEP
CONTAINER CLOSED WHEN NOT IN USE. IN CASE OF SPILL: REMOVE SOURCES OF
IGNITION & PROVIDE VENTILATION. DIKE SPILL AREA AND COVER WITH INERT
ABSORBENT MATERIAL & REMOVE TO DISPOSAL CONTAINERS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|