AMREP INC -- MISTY SILICONE MOLD RELEASE
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BBJSZ
MSDS NAME: MISTY SILICONE MOLD RELEASE
Responsible Party
Name: AMREP INC
Address: 990 INDUSTRIAL PK DR
City: MARIETTA GA 30062-2433
Info Phone: 404-422-2071/404-386-3083
Emergency Phone Number: 404-386-3083/404-422-2071
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Name: AMREP INC
Address: 990 INDUSTRIAL PK DR
City: MARIETTA GA 30062-2433
=======================================================
Contractor Summary
=======================================================
Name: AMREP INC
Address: 990 INDUSTRIAL PK DR
City: MARIETTA GA 30062-2433
Phone: 404-422-2071
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EXCESSIVE INHALATION OF VAPORS CAN BE HARMFUL. EYES/SKIN:
FROSTBITE. INGESTION: POSSIBLE CHEMICAL PNEUMONITIS IF ASPIRATED INTO LUNGS.
MAY CAUSE HEARTBEAT IRREGULARITIES, ASPHYXIATION, MAY DEPRESS HEA RT MUSCLE
ACTIVITY DUE TO EXCESSIVE EXPOSURE OF RAW MATERIALS OF THIS MIXTURE.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: INHALATION: HEADACHE, DIZZINESS, ASPHYXIA,
ANESTHETIC EFFECTS & POSSIBLE UNCONSCIOUSNESS. INGESTION: NAUSEA.
Medical Cond Aggravated By Exposure: PRE-EXISTING EYE, SKIN OR UPPER
RESPIRATORY CONDITIONS.
First Aid: EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. RESUSCITATE IF NECESSARY. INGESTION: CALL
PHYSICIAN IMMEDIATELY. OBTAIN MEDICAL ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: ABSORB W/SUITABLE MEDIUM. VENTILATE AREA. CAUTION:
SILICONE MAKES SURFACES SLIPPERY. DON'T FLUSH TO SEWER.
Waste Disposal Methods: INCINERATE OR LANDFILL ACCORDING TO LOCAL, STATE, OR
FEDERAL REGULATIONS. AEROSOL CANS WHEN VENTED TO ATMOSPHERIC PRESSURE THROUGH
NORMAL USE, POSE NO DISPOSAL HAZARD. DON'T PUNCTURE/INCINERATE CONTAI NERS.
Handling And Storage Precautions: DON'T PUNCTURE OR INCINERATE CONTAINER. DON'T
STORE AT TEMPERATURES ABOVE 130F.
Other Precautions: AVOID FOOD CONTAMINATION. KEEP OUT OF REACH OF CHILDREN.
AVOID BREATHING VAPORS.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NON-FLAMMABLE
Extinguishing Media: FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures: USE SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard: DON'T EXPOSE AEROSOLS TO TEMPERATURES ABOVE 130F
OR THE CONTAINER MAY RUPTURE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF VAPOR CONCENTRATION EXCEEDS TLV, USE RESPIRATOR
APPROVED BY U.S. BUREAU OF MINES FOR ORGANIC VAPORS.
Ventilation: ADEQUATE VENTILATION TO KEEP BELOW TLV
Protective Gloves: LATEX
Eye Protection: SAFETY GLASSES
Work Hygienic Practices: WASH W/SOAP & WATER BEFORE HANDLING FOOD. REMOVE
CONTAMINATED CLOTHING.
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: 45 PSIG
Spec Gravity: 0.940
Solubility in Water: INSOLUBLE
Appearance and Odor: CLEAR, COLORLESS SPRAY, ALMOST ODORLESS
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: OPEN FLAME, WELDING ARCS, HEAT, SPARKS, TEMPS
>130F.
Materials To Avoid: MAGNESIUM METAL
Hazardous Decomposition Products: HYDROGEN FLUORIDE, CO, CO2, SMALL AMOUNTS OF
PHOSGENE & CHLORINE.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: MISTY SILICONE MOLD RELEASE
Company: AMREP INC
Street: 990 INDUSTRIAL PK DR
City: MARIETTA GA
Zipcode: 30062-2433
Health Emergency Phone: 404-386-3083/404-422-2071
Label Required IND: Y
Date Of Label Review: 12/16/1998
Status Code: C
Label Date: 12/16/1998
Origination Code: G
Hazard And Precautions: EXCESSIVE INHALATION OF VAPORS CAN BE HARMFUL.
EYES/SKIN: FROSTBITE. INGESTION: POSSIBLE CHEMICAL PNEUMONITIS IF ASPIRATED
INTO LUNGS. MAY CAUSE HEARTBEAT IRREGULARITIES, ASPHYXIATION, MAY DEPRESS HEA
RT MUSCLE ACTIVITY DUE TO EXCESSIVE EXPOSURE OF RAW MATERIALS OF THIS
MIXTURE. INHALATION: HEADACHE,
DIZZINESS, ASPHYXIA, ANESTHETIC EFFECTS & POSSIBLE UNCONSC IOUSNESS.
INGESTION: NAUSEA.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|