HILLYARD INDUSTRIES -- SEAL 341
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BYHTD
MSDS NAME: SEAL 341
Responsible Party
Name: HILLYARD INDUSTRIES
Address: 302 N 4TH
Box: 909
City: ST JOSEPH MO 64502-5000
Info Phone: 816-233-1321 EXT 303
Emergency Phone Number: 816-233-1321 EXT 303
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Assigned Ind: Y
Name: HILLYARD INDUSTRIES
Address: 302 N 4TH
Box: 909
City: ST JOSEPH MO 64502
=======================================================
Contractor Summary
=======================================================
Name: HILLYARD INDUSTRIES
Address: 302 NORTH FOURTH STREET
City: ST JOSEPH MO 64501
Phone: 816-233-1321 (EXT 2303)
Name: HILLYARD INDUSTRIES
Address: 302 N 4TH
Box: 909
City: ST JOSEPH MO 64502
Phone: 816-233-1321 EXT 303
=======================================================
Ingredients
=======================================================
Name: STYRENE ACRYLIC EMULSION
-----------------------------
Cas: 78-51-3
RTECS #: KJ9800000
Name: TRIBUTOXYETHYL PHOSPHATE; ETHANOL, 2-BUTOXY-, PHOSPHATE (3:1); KP 140;
PHOSFLEX T-BEP
------------------------------
Cas: 111-90-0
RTECS #: KK8750000
Name: DIETHYLENE GLYCOL ETHYL ETHER, CARBITOL, CARBITOL CELLOSOLVEETHOXY
DIGLYCOL, 2-(2-ETHOXYETHOXY)-ETHANOL
% Wt: 1-2
------------------------------
Cas: 111-77-3
RTECS #: KL6125000
Name: DIETHYLENE GLYCOL METHYL ETHER, 2-(2-METHOXYETHOXY) ETHANOL METHYL
CARBITOL
% Wt: 1-2
------------------------------
Cas: 1314-13-2
RTECS #: ZH4810000
Name: ZINC OXIDE *95-4*
% Wt: 0.2-0.5
OSHA PEL: 5 MG/CUM
ACGIH TLV: 5 MG/CUM FUME
------------------------------
Cas: 7732-18-5
RTECS #: ZC0110000
Name: WATER
------------------------------
Name: ACRYLIC COPOLYMER
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: NO
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES: MILD IRRITATION.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: IRRITATION.
First Aid: EYES: FLUSH W/WATER FOR 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: PICK UP W/MOP/WET VAC & WASH AWAY W/WATER.
VENTILATE AREA OF LEAK. TRANSFER LIQUIDS & DIKING MATERIAL TO SEPARATE
SUITABLE CONTAINERS FOR RECOVERY/DISPOSAL. KEEP RUNOFFS OUT OF MUNICIPAL
SEWERS & OPEN BODIES OF WATER.
Waste Disposal Methods: SPILLS SHOULD BE PICKED UP W/WET VAC/ABSORBENT
MATERIAL. DISPOSE OF LIQUID IAW/FEDERAL, STATE & LOCAL REGULATIONS. WASTE
FROM NORMAL PRODUCT USE MAY BE SEWERED TO A PUBLIC OWNED TREATMENT WORKS.
Handling And Storage Precautions: FREEZING OF PRODUCT MAY RUPTURE CONTAINER.
PRODUCT SHELF LIFE IS RETAINED BY STORAGE AT 45-100F.
Other Precautions: INHALATION EXPOSURE TO SPRAY MIST SHOULD BE MAINTAINED AT
< THAN 10 MG/CUM PER EIGHT HOUR EXPOSURE. DON'T TAKE INTERNALLY.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: NONE
Fire Fighting Procedures: NONE
Unusual Fire/Explosion Hazard: MATERIAL MAY SPATTER IF TEMP EXCEEDS BOILING
POINT. POLYMER FILM CAN BURN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WHEN AIRBORNE EXPOSURE &/COMFORT LEVELS MAY BE
EXCEEDED, USE AN APPROVED AIR-PURIFYING RESPIRATOR.
Ventilation: MECHANICAL (GENERAL)
Protective Gloves: NONE REQUIRED FOR BRIEF CONTACT
Eye Protection: CHEMICAL GOGGLES
Work Hygienic Practices: REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. USE
GOOD PERSONAL HYGIENE PROCEDURES.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 198.26F
Vapor Pres: 21.1
Vapor Density: 1.1
Spec Gravity: 1.03-1.04
Solubility in Water: APPRECIABLE
Appearance and Odor: MILKY EMULSION: NON-OBJECTIONABLE ODOR
Percent Volatiles by Volume: 77.8
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: TEMP >350F.
Hazardous Decomposition Products: THERMAL: ACRYLIC MONOMERS
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SEAL 341
Assigned IND: Y
Company: HILLYARD INDUSTRIES
Street: 302 N 4TH
PO Box: 909
City: ST JOSEPH MO
Zipcode: 64502
Health Emergency Phone: 816-233-1321 EXT 303
Label Required IND: Y
Date Of Label Review: 12/16/1998
Status Code: C
Label Date: 12/16/1998
Origination Code: G
Hazard And Precautions: EYES: MILD IRRITATION.
IRRITATION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.