DEXTER AEROSPACE -- EA 913/B-3 PT A
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BZJZY
MSDS NAME: EA 913/B-3 PT A
Kit Part: Y
Responsible Party
Name: DEXTER AEROSPACE
Address: 2850 WILLOW PASS RD
City: PITTSBURG CA 94565-3299
Info Phone: 510-458-8000
Emergency Phone Number: 800-424-9300(CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address: 2850 WILLOW PASS ROAD
Box: 312
City: BAY POINT CA 94565-3299
Phone: 202-483-7616
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: SEE INGREDIENT 1.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:BRIEF CONT MAY IRRIT SKIN/CAUSE RASH.
CHRONIC:REPEATED OR PROLONGED SKIN CONTACT MAY RESULT IN ALLERGIC
SENSITIZATION. THERE MAY BE SOME RESIDUAL AMTS OF EPICHLOROHYDRIN, WHICH IS
USED TO MAKE I NG 1. IT HAS BEEN LISTED AS IARC GRP 2AMATL(I.E., PROBABLE
HUMAN CARCIN). ING 1 HAS EXHIBITED MUTAGENICITY IN BACTERIA.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SKIN RASH, IRRITATION.
Medical Cond Aggravated By Exposure: SKIN SENSITIZATION.
First Aid: EYE:FLUSH W/WATER FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS,
GET MEDICAL ATTENTION. SKIN:WASH THOROUGHLY W/SOAP & WATER. IF IRRITATION
PERSISTS, GET MEDICAL ATTENTION. INHAL:REMOVE VICTIM TO FRE SH AIR. IF
SYMPTOMS PERSIST, GET MEDICAL ATTENTION. INGEST:DRINK PLENTY OF WATER. GET
MEDICAL ATTENTION IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR PROTECTIVE CLOTHING, GLOVES & SAFETY
GLASSES. SCRAPE UP OR SHOVEL INTO DOT APPROVED WASTE CONTAINERS.
Waste Disposal Methods: THIS MATL AS WASTE IS NOT CONSIDERED RCRA HAZ WASTE.
HOWEVER, INCIN IN EPA-APPRVD WASTE INCIN IS PREF DISP PRACTICE. CHEM ADDNS,
PROCESSING/OTHERWISE ALTERING THIS MATL MAY MAKE WASTE MANAGEMENT INFO
HEREIN INCOMPLETE, INACCURATE/OTHERWISE(SUPDAT)
Handling And Storage Precautions: REFRIGERATED STORATE IS RECOMMENDED TO
MAINTAIN PRODUCT QUALITY. THIS PRODUCT MAY BE STORED AT ROOM TEMPERATURE
(77F) FOR UP TO 12 MONTHS.
Other Precautions: FOLLOW CURING SCHEDULE AS REC IN PROD LITERATURE. SEE ALSO
REACTIVITY SECTION (CNDTNS TO AVOID (STABILITY). DO NOT CUT, GRIND,
WELD/DRILL ON/NEAR THIS CNTNR. WARNING! CAUSES EYE IRRIT & MAY CAUSE SKIN
IRRIT. CNTNS EPOXY RESINS. AVOID CONT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: DRY CHEMICAL, HALON FIRE EXTINGUISHER, WATER SPRAY, FOAM
OR FOG.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). CARTRIDGE RESPS DO NOT PROVIDE ADEQ PROT FOR FIRE FIGHTERS
OR EXOTHERM MITIGATION.
Unusual Fire/Explosion Hazard: MAY LIBERATE LARGE QUANTITIES OF DENSE
FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIFIED TOXIC GASES. HAZ RATING
SYSTEM:FLAMM-1.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN (FP N). UNNECESSARY W/ADEQUATE EXHAUST VENTILATION.
Ventilation: LOCAL EXHAUST VENTILATION AT THE POINT OF USE.
Protective Gloves: BUTYL RUBBER, PVC/NITRILE RUBBER GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: WASH AFTER HANDLING.
Supplemental Safety and Health: NOTE:USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). CNDTNS (STAB):MIXED ADHESIVE >100F UNLESS
CURING SURFS TO BE BONDED. FAILURE TO OBSERVE THESE PRECS MAY RSLT IN
EXCESSIVE H EAT BUILD-UP CAUSING EXOTHERM. EXOTHERMHAS POTNTL FOR RELS OF TOX
GASSES. WASTE DISP METH:INAPPROP. ADDNLY,
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: NIL
Vapor Density: >1
Spec Gravity: 1.2 (H*2O=1)
Solubility in Water: NEGLIGIBLE
Appearance and Odor: OFF-WHITE EPOXY PASTE.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID MIXING RESIN (PART A) & CURING AGENT (PART
B) IN BATCHES >1/2 LB UNLESS YOU PLAN TO USE IMMED. DO NOT HEAT(SUPDAT)
Materials To Avoid: STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products: CO, NO*X, ALDEHYDES, ACIDS & UNDETERMINED
ORGANICS.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: SEE CONDITIONS TO AVOID (STABILITY).
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: EA 913/B-3 PT A
Company: DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Street: 2850 WILLOW PASS ROAD
PO Box: 312
City: BAY POINT CA
Zipcode: 94565-3299
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 10/19/1995
Status Code: C
Label Date: 10/19/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:BRIEF CONTACT MAY IRRITATE SKIN OR
CAUSE RASH. CHRONIC:REPEATED OR PROLONGED SKIN CONTACT MAY RESULT IN ALLERGIC
SENSITIZATION. THERE MAY BE SOME RESIDUAL AMOUNTS OF EPICHLOROHYDRIN . IT HAS
BEEN LISTED AS IARC GROUP 2A MATERIAL (I.E., PROBABLE HUMAN CARCINOGEN).
INGREDIENT 1 HAS EXHIBITED MUTAGENICITY IN BACTERIA.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.