SYSTEM THREE RESINS CHEM TECH -- T-88 PART B-HARDENER, 180000
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBDXP
MSDS NAME: T-88 PART B-HARDENER, 180000
Responsible Party
Name: SYSTEM THREE RESINS CHEM TECH DIVISION
Address: 1155 NW 46TH STREET
Box: 70436
City: SEATTLE WA 98107
Info Phone: 206-783-2243
Emergency Phone Number: 206-782-7976;800-424-9300(CHEMTREC)
Preparer's Name: WKH
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: SYSTEM THREE RESINS
Address: 1155 N W 48TH STREET
Box: 70436
City: SEATTLE WA 98107
Phone: 206-782-7976
Name: SYSTEMS THREE RESINS INC
Address: 1155 NW 46TH STREET
Box: 70436
City: SEATTLE WA 98107
Phone: 206-782-7976
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:MAY CAUSE BURNS TO SKIN AND EYES. HIGH VAPOR
CONCENTRATION CAN CAUSE SEVERE IRRITATION OF EYES AND RESPIRATORY TRACT.
LIQUID CAUSES SEVERE DAMAGE TO MUCOUS MEMBRANES IF SWALLOWED. CHRONIC:PROLON
GED AND REPEATED SKIN CONTACT MAY CAUSESKIN SENSITIZATION, ASTHMA OR OTHER
ALLERGIC RESPONSES. CARCIN:(EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZS:RESULTS OF IN VITRO MUTAGENICITY
TESTS ON ETHYLENE AMINES HAVE BEEN NEGATIVE. IT IS NOT EXPECTED THAT ANY OF
THE INGREDIENTS ARE CARCINOGENIC.
Medical Cond Aggravated By Exposure: MATL MAY BE STRONG SKIN SENSIT IN CERTAIN
SUSCEPTIBLE PERSONS. ONCE SENSITIZED, MOST PERSONS ARE UNABLE TO WORK AROUND
AMINE CURED EPOXY RESINS W/OUT ALLERGIC RXN. SENSITIZED PERSONS ARE NOT (SUP
DAT)
First Aid: EYES:FLUSH THORO W/WATER FOR @ LST 15 MIN. GET IMMED MED ATTN.
SKIN:REMOVE CONTAM CLTHG & FLOOD AREA W/WATER. WASH AFFECTED SKIN W/SOAP
& WATER. WASH CLTHG BEFORE REUSE. DISCARD SHOES. GET MED ATTN IF
REDNESS, SORENESS/BLISTERING OCCUR/PERSIST. INHAL:REMOVE TO FRESH AIR. ADMIN
OXYG IF NEC. GET MED ATTN IF BRTHG IS DFCLT/COUGH DEVELOPS. INGEST:DO NOT
INDUCE VOMIT. VOMIT WILL CAUSE FURTHER
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: AVOID CONT W/MATL. PERSONS NOT WEARING APPROP PROT
EQUIP SHOULD LEAVE AREA UNTIL CLEANUP IS COMPLETE. STOP SPILL AT SOURCE, DIKE
AREA TO PVNT SPREADING, PUMP LIQ TO SALV TANK/DRUM. REMAINING LIQ MAY B E
TAKEN UP ON CLAY, DIATOMACEOUS EARTH,
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N). WASTE IS NOT HAZARDOUS BY RCRA CRITERIA (40 CFR 261).
PLACE IN AN APPROPRIATE DISPOSAL FACILITY IN COMPLIANCE WITH LOCAL
REGULATIONS.
Handling And Storage Precautions: CONFINE MATERIAL IN SEALED CONTAINERS WHEN
NOT IN USE.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: >250F,>121C
Extinguishing Media: FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP (FP
N). WATER SPRAY MAY BE USED TO COOL FIRE EXPOSED CNTNRS. TOXIC FUMES WILL BE
EVOLVED WHEN SUBSTANCE IS BURNED.
Unusual Fire/Explosion Hazard: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NORMALLY NONE REQUIRED WHEN ADEQ VENT IS PROVIDED. IN
THE ABSENCE OF PROPER ENVIRONMENTAL CONTROL NIOSH/MSHA APPROVED RESP IS
REQUIRED. FOR EMERGENCIES, A NIOSH/MSHA APPROVED SELF-CONTAINED BREATHING
APPARATUS/FULL-FACED RESP IS REC.
Ventilation: PROVIDE ADEQUATE VENTILATION IN WORK AREAS.
Protective Gloves: ALWAYS WEAR IMPERVIOUS GLOVES, (SUPDAT)
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS
Other Protective Equipment: ANSI APPRVD EMER EYEWASH & DELUGE SHOWER (FP N).
WEAR CLEAN, BODY-COVERING CLOTHING TO AVOID SKIN CONTACT.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: USERS OF "L" VERSION CONSULT "LR" VERSION FOR
ADDNL INFO (FP N). CNDTNS (STAB):PRDCING HEAT. THEY SHOULD NOT BE MIXED
W/EACH OTHER UNDER UNCONTROLLED CNDTNS/IN LG MASS AS ENSUING EXOTHERM MAY
RSLT IN HEAT & SMK. MED CNDTNS:KNOWN TO HAVE OTHER HLTH PROBLEMS AS RSLT
OF SENSIT. PROT GLOVES:NEOPRENE, VINYL OR RUBBER.
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Density: HVR/AIR
Spec Gravity: 1.02-1.12
Evaporation Rate & Reference: SLOWER THAN ETHER
Solubility in Water: NEGLIGIBLE
Appearance and Odor: MODERATELY DARK COLORED THICK LIQUID WITH AMMONIA SMELL.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EPOXY RESINS & EPOXY RESIN HARDENERS REACT W/EACH
OTHER PRDCING HEAT. THEY SHOULD NOT BE MIXED W/EACH OTHER (SUPP DATA)
Materials To Avoid: STRONG OXIDIZING AGENTS, MINERAL ACIDS.
Hazardous Decomposition Products: OXIDES OF CARBON, NITROGEN.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: T-88 PART B-HARDENER, 180000
Assigned IND: Y
Company: SYSTEM THREE RESINS
Street: 1155 N W 48TH STREET
PO Box: 70436
City: SEATTLE WA
Zipcode: 98107
Health Emergency Phone: 206-782-7976;800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 11/22/1995
Status Code: C
Label Date: 11/22/1995
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:MAY CAUSE BURNS TO SKIN AND EYES.
HIGH VAPOR CONCENTRATION CAN CAUSE SEVERE IRRITATION OF EYES AND RESPIRATORY
TRACT. LIQUID CAUSES SEVERE DAMAGE TO MUCOUS MEMBRANES IF SWALLOWED. C
HRONIC:PROLONGED AND REPEATED SKIN CONTACT MAY CAUSE SKIN SENSITIZATION,
ASTHMA OR OTHER ALLERGIC RESPONSES.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.