COATES REPROGRAPHICS INC -- TONER M5130 FOR LASER MATRIX 1000
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBDYR
MSDS NAME: TONER M5130 FOR LASER MATRIX 1000
Responsible Party
Name: COATES REPROGRAPHICS INC
Address: COUNTRY CLUB RD
City: DALLAS PA 18612-9171
Info Phone: 717-675-1131
Emergency Phone Number: 717-675-1131
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: COATES REPROGRAPHICS INC
Address: COUNTRY CLUB RD
City: DALLAS PA 18612-9171
Phone: 717-675-1131
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: MINIMAL LUNG IRRIT MAY OCCUR AS W/EXPOS TO LG AMTS OF ANY
DUST. IN CHRONIC INHAL STUDY IN RATS USING SPEC TEST TONER, THERE WERE NO
LUNG CHGS AT ALL IN LOWEST EXPOS LEVEL (1MG/M3), MOST RELEVANT LEVEL TO
POTNTL HUMAN EXPOS. VERY SLIGHT DEGREE OF FIBROSIS WAS NOTED IN 25% OF
ANIMALS AT MID EXPOS LEVEL (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: (4MG/M3) WHILE SLIGHT DEGREE OF
FIBROSIS WAS OBSERVED AT HIGHEST EXPOS LEVEL (18MG/M3) IN ALL ANIMALS. THESE
FINDINGS ARE ATTRIBUTED TO "LUNG OVERLOADING," GENERIC RESPONSE TO EXCESS
AMTS OF ANY DUST RETAINED IN LUNGS FOR PRLNGD INTERVAL. SPEC TEST TONER WAS
10 TIMES MORE RESPIRABLE THAN COMMERCIALLY (SUPDAT)
Medical Cond Aggravated By Exposure: NONE WHEN USED AS INTENDED IN THE PRINTING
EQUIPMENT FOR WHICH IT IS DESIGNED.
First Aid: INHALATION: REMOVE FROM EXPOSURE. SKIN: WASH WITH SOAP AND WATER.
INGESTION: DILUTE STOMACH CONTENTS WITH SEVERAL GLASSES OF WATER. SEEK
MEDICAL ATTENTION IF NECESSARY. EYES: FLUSH WITH WATER FOR AT L EAST 15
MINUTES. SEEK MEDICAL ATTENTIONIF IRRITATION DEVELOPS.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: LOOSE INK CAN BE REMOVED USING A VACUUM CLEANER AND
MAY BE SWEPT UP (AVOID DUST INHALATION - USE APPROPRIATE DUST MASK IF
NECESSARY).
Neutralizing Agent: NONE LISTED BY MANUFACTURER.
Waste Disposal Methods: LANDFILL OR INCINERATE. ENSURE CONFORMITY WITH FEDERAL,
STATE AND LOCAL REGULATIONS.
Handling And Storage Precautions: STORE IN A COOL, DRY, WELL VENTILATED AREA.
AVOID PROLONGED INHALATION OF EXCESSIVE DUST.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Extinguishing Media: FOAM, DRY CHEMICAL, CARBON DIOXIDE, WATER SPRAY OR MIST.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). AVOID INHALATION OF SMOKE.
Unusual Fire/Explosion Hazard: MATERIAL IS COMBUSTIBLE. WHEN DISPERSED IN AIR,
AS A DUST, IT CAN FORM EXPLOSIVE MIXTURES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NORMALLY NONE REQUIRED WHEN USED AS INTENDED IN THE
PRINTING EQUIPMENT FOR WHICH IT IS DESIGNED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN (FP N).
Ventilation: NORMALLY NONE REQUIRED.
Protective Gloves: NORM NONE REQD WHEN USED AS INTENDED.
Eye Protection: ANSI APPROVED SAFETY GLASSES (FP N).
Other Protective Equipment: NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices: FOR USE OTHER THAN NORM CUSTOMER OPERATING PROCEDURES
(SUCH AS BULK TONER PROCESSING FACILITIES), GOGGS & (SUPDAT)
Supplemental Safety and Health: EFTS OF OVEREXP: AVAIL TONER TO COMPLY W/EPA
TESTING PROTOCOL. ON BASIS OF THIS INFO, EXPOS LIMIT OF 2.5 MG/M3 (TOTAL
DUST) IS RECOMMENDED. HYGIENE PRACTS: NIOSH/MSHA APPRVD RESPS MAY BE REQD.
FOR MOR E DETAILS CONTACT THE LISTED MFR'S INFORMATION NUMBER.
=======================================================
Physical/Chemical Properties
=======================================================
M.P/F.P Text: >212F,>100C
Spec Gravity: 1.5-1.7(H*2O=1)
Solubility in Water: NEGLIGIBLE
Appearance and Odor: FINE BLACK POWDER; MILD RESINOUS ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDANTS.
Hazardous Decomposition Products: PRODUCTS OF COMBUSTION CAN BE TOXIC DEPENDING
ON CONDITIONS. AVOID BREATHING SMOKE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: TONER M5130 FOR LASER MATRIX 1000
Company: COATES REPROGRAPHICS INC
Street: COUNTRY CLUB RD
City: DALLAS PA
Zipcode: 18612-9171
Health Emergency Phone: 717-675-1131
Label Required IND: Y
Date Of Label Review: 01/23/1996
Status Code: C
Label Date: 01/23/1996
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: MINIMAL LUNG IRRITATION MAY OCCUR AS WITH
EXPOSURE TO LARGE AMOUNTS OF ANY DUST. CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.