CANON USA INC -- MP CARTRIDGE 40 BLACK FOR FP300 PRINTER, M95-
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBXDW
MSDS NAME: MP CARTRIDGE 40 BLACK FOR FP300 PRINTER, M95-0471
Responsible Party
Name: CANON USA INC
Address: ONE CANON PLAZA
City: LAKE SUCCESS NY 11042
Info Phone: 516-488-6700
Emergency Phone Number: 800-424-9300(CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: CANON USA INC
Address: ONE CANON PLZ
City: NEW HYDE PARK NY 11042
Phone: 516-328-5000; 5600
Name: CANON USA INC
Address: ONE CANON PLAZA
City: LAKE SUCCESS NY 11042
Phone: 516-328-5600
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: LD50(ORAL,RAT):>5,000 MG/KG
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: TONER POWDER IS NOT ACCESSIBLE, UNLESS THE CARTRIDGE IS
FORCED, OR BROKEN INTO. INGESTION:NOT AN APPLICABLE RTE OF ENTRY UNDER
ORDINARY USE. INHALATION:MINIMAL RESPIRATORY TRACT IRRITATION MAY OCCUR A S
WITH EXPOSURE TO LARGE AMOUNTS OF NON-TOXIC DUST. EYE:NO SPECIFIC HAZ KNOWN
TO MFR. HOWEVER, ANY (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZS:MATL CONT EYE MAY BE IRRIT.
SKIN:LOW HAZ FOR INDUST HNDLG. OVEREXPOS UNLIKELY TO CAUSE SKIN IRRIT.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INHALATION:REMOVE FROM EXPOSURE TO FRESH AIR. EYES:FLUSH WITH PLENTY
OF WATER FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS CONTACT A PHYSICIAN.
SKIN:WASH WITH SOAP AND WATER. INGESTION:DILUTE STOMA CH CONTENTS WITH
SEVERAL GLASSES OF WATER.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: NO TONER SPILLAGE OCCURS IN NORMAL OPERATION OR
HANDLING. IF IT SHOULD OCCUR, AVOID INHALATION OF DUST. SWEEP MATERIAL ONTO
PAPER AND COLLECT IT.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: NO SPECIAL DISPOSAL TECHNIQUE REQUIRED. ENSURE
COMPLIANCE WITH FEDERAL, STATE AND/OR LOCAL REGULATIONS. CARTRIDGE AND TONER
MAY BE CONSIDERED PLASTIC WASTE.
Handling And Storage Precautions: KEEP OUT OF REACH OF CHILDREN. KEEP FROM
CONTACT WITH OXIDIZING MATERIALS.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: THIS MATERIAL, LIKE MOST ORGANIC MATERIALS IN
POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN (FP N).
Ventilation: GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: NONE.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
M.P/F.P Text: >212F,>100C
Spec Gravity: 1.4-1.6(H*2O=1)
Solubility in Water: NEGLIGIBLE
Appearance and Odor: BLACK FINE POWDER, SLIGHT PLASTIC ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDIZERS.
Hazardous Decomposition Products: AS WITH ANY OTHER ORGANIC MATERIAL,
DECOMPOSITION WILL PRODUCE CARBON DIOXIDE AND PROBABLY CARBON MONOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: MP CARTRIDGE 40 BLACK FOR FP300 PRINTER, M95-0471
Company: CANON USA INC
Street: ONE CANON PLAZA
City: LAKE SUCCESS NY
Zipcode: 11042
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 01/24/1996
Status Code: C
Label Date: 01/24/1996
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE:INHALATION:MINIMAL RESPIRATORY TRACT IRRITATION
MAY OCCUR AS WITH EXPOSURE TO LARGE AMOUNTS OF NON-TOXIC DUST. EYE:ANY
MATERIAL CONTACTING THE EYE MAY BE IRRITATING. CHRONIC:NONE SPECIFIED BY MA
NUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.