PPG INDUSTRIES INC -- INDUSTRIAL GLOSS ENAMELS 7-A, 7-835
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBZYK
MSDS NAME: INDUSTRIAL GLOSS ENAMELS 7-A, 7-835
Responsible Party
Name: PPG INDUSTRIES INC
Address: 4325 ROSANNA DR
Box: 9
City: ALLISON PARK PA 15101
Info Phone: 412-492-6555
Emergency Phone Number: 304-843-1300
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PPG INDUSTRIES INC
Address: UNKNOWN
Box: UNKNOW
City: UNKNOWN NK 00000
Phone: UNKNOWN
Name: PPG INDUSTRIES INC. COATINGS & RESINS GP
Address: 4325 ROSEANNA DR PO BOX 9
Box: 9
City: ALLISON PARK PA 15101
Phone: 412-492-5555
=======================================================
Ingredients
=======================================================
Cas: 1335-30-4
Name: ALUMINUM SILICATE
% Wt: 10-15
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 13463-67-7
RTECS #: XR2275000
Name: TITANIUM DIOXIDE; (TITANIUM DIOXIDE (IN SOME COLORS))
% Wt: 25-30
OSHA PEL: 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
------------------------------
Name: PIGMENTS
% Wt: 10-15
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Cas: 64742-88-7
Name: SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM ALIPHATIC SOLVENT
NAPHTHA)
% Wt: 35-40
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 64475-85-0
RTECS #: PY8240000
Name: MINERAL SPIRITS; (HYDROTREATED HEAVY NAPHTHA)
% Wt: 2-5
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 1330-20-7
RTECS #: ZE2100000
Name: XYLENE (SARA 313) (CERCLA)
% Wt: 1-2
OSHA PEL: 100 PPM
ACGIH TLV: 100 PPM/150 STEL
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Name: FILM FORMERS ROSINS, AND ADDITIVES
% Wt: 40-45
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: EFTS OF OVEREXP:EXCESS SKIN CONT. CHRONIC:AVOID LONG TERM & RPTD
CONT. THIS PROD CNTNS TITANIUM OXIDE. ANIMALS
-----------------------------
Name: ING 8:INHALING MASSIVE QTYS OF TITANIUM OXIDE DUST IN LONG-TERM STUDY
DEVELOPED LUNG TUMORS. STUDIES W/HUMANS
-----------------------------
Name: ING 9:INVOLVED IN MFR OF THIS PIGMENT INDICATE NO INCR RISK OF CANCER
FROM EXPOS. POTNTL FOR INHAL OF TITANIUM
-----------------------------
Name: ING 10:DIOXIDE DUSTS FROM COATINGS IS VERY LIMITED. SINCE OVEREXP ARE NOT
EXPECTED. THERE IS NO SIGNIFICANT
-----------------------------
Name: ING 11:HAZARD TO MAN.
-----------------------------
Name: RESP PROT:CAREFULLY TO DETERM TYPE OF AIRBORNE CONTAMINANTS AGAINST WHICH
RESP IS EFTIVE & HOW IT IS TO BE
-----------------------------
Name: ING 13:PROPERLY FITTED.
-----------------------------
Name: VENT:SUGGESTED EXPOS LIMS, THE LEL IN FIRE & EXPLO HAZ DATA SECTION
BELOW STATED LIM, & TO REMOVE DECOMP PRODS
-----------------------------
Name: ING 15:DURING WELDING OR FLAME CUTTING.
-----------------------------
Name: PROT GLOVES:NITRILE RUBBER OR NEOPRENE RUBBER.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:INGEST:HARMFUL/FATAL. EYE:CAUSES IRRIT. SKIN:MAY
CAUSE MOD SKIN IRRIT. INHAL:VAP & SPRAY MIST MAY BE HARMFUL IF INHALED.
VAP IRRITATES EYES, NOSE, & THROAT. RPTD EXPOS TO HIGH VAP CONCS MAY CAUS
E IRRIT OF RESP SYS & PERM BRAIN & NERVSYS DMG. INTENTIONAL MISUSE BY
DELIB CONCENTRATING & INHALING (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ:CONTENTS CAN BE HARMFUL/FATAL.
SIGNS & SYMPS OF OVEREXP:EYE WATERING, HDCH, NAUS, DIZZ, & LOSS OF
COORD ARE INDICATIONS SOLV LEVS ARE TOO HIGH. REDNESS, ITCHING, BURNING
SENSATION & VISUAL DI STURB MAY INDICATE EXCESS EYE CONT. DRYNESS,
ITCHING, CRACKING, BURNING, REDNESS, & SWELL ARE CNDTNS ASSOC WITH
First Aid: INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER FOR @
LEAST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY WASHING W/SOAP
& WATER. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP & O THER
SUPPORTIVE MEASURES AS REQD. OTHER:IF INGEST, ANY TYPE OF OVEREXP/SYMPS OF
OVEREXP OCCUR DURING/FOLLOWING USE OF PROD, CONT POIS CTL CTR, EMER ROOM/PHYS
IMMED, HAVE MSDS INFORMATION AVAILABLE.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER NIOSH
APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE/OTHER ABSORBENT
MATL & PLACE INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: WASTE MATERIAL MUST BE DISPOSED OF I/A/W FEDERAL,
STATE, PROVINCIAL, & LOCAL ENVIRONMENTAL CONTROL REGULATIONS. EMPTY
CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH APPRVD WASTE MANAGEMENT
FACIL ITY.
Handling And Storage Precautions: DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS II
COMBUSTIBLE LIQUIDS.
Other Precautions: IF MATL IS PART OF MULTIPLE COMPONENT SYS, READ MSDS(S) FOR
OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS RSLTG MIX MAY HAVE HAZDS OF ALL
OF ITS PARTS, CNTNRS SHOULD BE GROUNDED WHEN POURING. AVOID FR EE FALL OF
LIQS IN EXCESS OF FEW INCHES.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: 102F,39C
Extinguishing Media: USE NATL FIRE PROT ASSOC (NFPA) CLASS B EXTING (CO*2, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED (SUPDAT)
Fire Fighting Procedures: NIOSH APPRVD SCBA & FULL PROT EQUIP (FP N). WATER
SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD CNTNRS TO PVNT
PRESS BUILD-UP & POSSIBLE (SUPDAT)
Unusual Fire/Explosion Hazard: KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM HEAT,
ELEC EQUIP, SPKS, & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)
=======================================================
Control Measures
=======================================================
Respiratory Protection: OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING VENT CTLS,
VAP EXHAUST/FRESH AIR ENTRY. NIOSH APPRVD (TC-23C) AIR PURIFYING/NIOSH APPRVD
AIR SUPPLIED (TC-19C) RESPS MAY ALSO REDUCE EXPOS. READ RESP MFR I
NSTRUCTIONS & LITERATURE
Ventilation: PROVIDE GEN DILUTION/LOC EXHAUST VENT VOL & PATTERN TO KEEP
CONC OF INGREDS LISTED IN ING SECTION BELOW LOWEST
Protective Gloves: IMPERMEABLE CONSTRUCTED OF
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: NIOSH APPRVD EYE WASH & DELUGE SHOWER (FP N).
IMPERMEABLE APRON CONSTRUCTED OF NITRILE RUBBER/NEOPRENE RUBBER.
Work Hygienic Practices: CLEAN OR DISCARD CONTAMINATED CLOTHING AND SHOES.
Supplemental Safety and Health: APPEAR/ODOR:INGREDIENT SECTION. EXTING MEDIA:TO
EXTING NFPA CLASS II COMBUST LIQ FIRES. FIRE FIGHT PROC:AUTOIGNIT/EXPLO WHEN
EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF. EXPLO HAZ:SUR
F. TOX GASES MAY FORM WHEN PROD IS CONTBY FLAME/HOT SURF. HAZ DECOMP
PROD:NITROGEN, FORMALDEHYDE.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >277F,>136C
Vapor Pres: <3
Vapor Density: HVR/AIR
Spec Gravity: 0.96-1.32(FP N)
Appearance and Odor: VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE SOLVENTS
LISTED IN (SUPDAT)
Percent Volatiles by Volume: <54
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AVOID CONT W/STRONG ALKALIES, STRONG MINERAL
ACIDS, OR STRONG OXIDIZING AGENTS.
Materials To Avoid: AVOID CONT W/STRONG ALKALIES, STRONG MINERAL ACIDS, OR
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY PRDCE HAZ DECOMP PRODS WHEN HEATED.
WELDING, BRAZING/FLAME-CUTTING MAY PRDCE FUMES INCL: CO, OXIDES OF (SUPDAT)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: INDUSTRIAL GLOSS ENAMELS 7-A, 7-835
Assigned IND: Y
Company: PPG INDUSTRIES INC. COATINGS & RESINS GP
Street: 4325 ROSEANNA DR PO BOX 9
PO Box: 9
City: ALLISON PARK PA
Zipcode: 15101
Health Emergency Phone: 304-843-1300
Label Required IND: Y
Date Of Label Review: 09/25/1996
Status Code: C
Label Date: 09/25/1996
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Slight
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:INGESTION:HARMFUL/FATAL. EYE:CAUSES
IRRITATION. SKIN:MAY CAUSE MODERATE SKIN IRRITATION. INHALATION:VAPOR &
SPRAY MIST MAY BE HARMFUL IF INHALED. VAPOR IRRITATES EYES, NOSE, & THROA
T. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING CONTENTS
MAY BE HARMFUL OR FATAL. CHRONIC:REPEATED EXPOSURE TO HIGH VAPOR
CONCENTRATIONS MAY CAUSE IRRITATION OF RESPIRATORY SYSTEM AND P ERMANENT
BRAIN AND NERVOUS SYSTEM DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SULFITE BUFFER REAGENT
| 5329-14-6 |
|
TOTAL HARDNESS BUFFER SOLUTION, 6999
| 124-68-5
64-19-7
7732-18-5 |
|
HYDROGEN PEROXIDE, 30%, 9854
| 7722-84-1
7732-18-5 |
|
MOLYVAR 1, 7713
| 110-15-6
6106-21-4
6381-92-6 |
|
DYNAMIGHT
| 1310-73-2
7732-18-5
9016-45-9
9003-04-7
2235-43-0 |
|
ARCAIR PROTEX COOLANT, 57-016-100
| 107-21-1 |
|
ARCAIR PROTEX COOLANT, 57-056-100
| 107-21-1 |
|
ARCAIR ZINC RICH COLD GALVANIZE, 57-031-002
| 75-09-2
7440-66-6
1330-20-7 |
|
ARCAIR PROTEX TIP DIP, 57-021-105
| 8009-03-8 |
|
EF PRIMER 49
| 67-64-1
67-63-0
149-30-4 |
|
7027, MIRROLAC INT-EXT ALKYD-URETHANE (SUPP DATA)
| 64742-88-7
147-14-8
13463-67-7 |
|
LUBE 2 STYLE 275 (C-666-1)
| |
|
2.75 FL OZ FAST ORNG HC W/PUM, 25300, PART (SUPDAT)
| 7732-18-5
1332-09-8
68154-97-2
68647-72-3
9003-01-4
102-71-6
14808-60-7
8001-97-6
61789-91-1
8006-54-0
26172-55-4
2682-20-4
5989-27-5 |
|
7173647, PART OF KIT 3333, LOCQUIC RAPID CURE(SUPDAT)
| 79-01-6
67-63-0
124-38-9
68411-19-8
13395-16-9 |
|
AQUA-TILE (TINT BASE), AATA112
| 34590-94-8
7732-18-5
2807-30-9
64-19-7 |
|
795 SIL BUILDING SEALANT LIMESTONE
| 1317-65-3
57-11-4
112945-52-5
1185-55-3
14808-60-7 |
|
VEDOC POWDER COATINGS/VE-202-4AS WHITE POWDER COATING
| |
|
CORK TAPE
| 8052-42-4 |
|
2+2 DOT 4 BRAKE FLUID, B2900
| |
|
2+2 DOT 4 BRAKE FLUID, B2902
| |
|
2+2 DOT 4 BRAKE FLUID, B29055
| |
|
PRO-LINE 40-THINNER FOR BRUSH APPLICATION OF (SUPDAT)
| |
|
DEKA PRIMER, 1104
| 1314-13-2
13463-67-7
7732-18-5
7727-43-7 |
|
DEKA PRIMER, 1105
| 1314-13-2
13463-67-7
7732-18-5
7727-43-7 |
|
DEKA PRIMER, 1106
| 1314-13-2
13463-67-7
7732-18-5
7727-43-7 |
|
S-800 LATEX ADMIXTURE, 57-00-9160
| |
|
S-810 LATEX ADMIXTURE, 57-00-9160
| |
|
UNI CURE
| |
|
UNI CURE CONCENTRATE
| |
|
TRAP & DRAIN GOLD
| |
|
UNICHEM 500F
| |
|
SECTION WASH'N GUARD LEATHER & VINYL TREATMENT
| |
|
DRI WASH'N GUARD WATERLESS WASH & PROTECTIVE GLAZE
| 8008-20-6 |
|
DRI WASH'N GUARD HOUSEHOLD CLEANER POLISH & SEALANT
| 8052-41-3 |
|
INDUSTRIAL GLOSS ENAMELS 7-A, 7-833
| 1335-30-4
13463-67-7
64742-88-7
64475-85-0
1330-20-7 |
|
INDUSTRIAL GLOSS ENAMELS 7-A, 7-834
| 1335-30-4
13463-67-7
64742-88-7
64475-85-0
1330-20-7 |
|
INDUSTRIAL GLOSS ENAMELS 7-A, 7-835
| 1335-30-4
13463-67-7
64742-88-7
64475-85-0
1330-20-7 |
|
HYDROTECH REAGENT 1-BROMINE INDICATOR POWDER
| 6283-63-2 |
|
DPD 1 TABLETS
| 6283-63-2 |
|
HYDROTECH ACCU-TEST DPD 1
| 6283-63-2 |
|
ENVIROTEX LITE RESIN, 2064
| |
|
ULTRA CLEAN SP
| 1303-96-4 |
|
LUBRI-LINK CHAIN LUBRICANT
| |
|
SODIUM HYDROXIDE (50% SOLUTION)
| 1310-73-2
7732-18-5 |
|
CARBON BLACK
| 1333-86-4 |
|
QUROX, 1699
| |
|
QD DECRATRIM, 612
| 64742-88-7
25265-77-4 |
|
WELCO 15
| 7440-50-8
7439-89-6
7440-31-5
7440-66-6 |
|
62-2217-8540-5, SCOTCH-WELD EC-2216 B/A (SUP DAT)
| |
|
SMOOTH KOTE INSULATING FINISHING CEMENT
| |
|
|