3M GENERAL OFFICES -- 62-2217-8540-5, SCOTCH-WELD EC-2216 B/A (SUP
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 00-152-0010
MSDS Num: CCBDT
MSDS NAME: 62-2217-8540-5, SCOTCH-WELD EC-2216 B/A (SUP DAT)
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Item Description Information
=======================================================
Item Manager: GSA
Item Name: ADHESIVE
Unit of Issue: KT
UI Container Qty: B
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: YES
OSHA: NO
Effects of Exposure: ACUTE: EYES: EXTREMELY IRRITATING TO EYES UPON DIRECT
CONTACT. DUST FROM GRINDING, SANDING OR CUTTING OPERATIONS ON THE CURED
PRODUCT MAY CAUSE EYE IRRITATION. SKIN: MAY CAUSE SKIN IRRITATION UPON PRO
LONGED CONTACT. MAY CAUSE AN ALLERGIC SKIN REACTION IN CERTAIN INDIVIDUALS.
INHALATION: VAPORS MAY (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: SEE LR VERSION INGREDIENT 4 FOR ADDITIONAL
INFORMATION (FP N).
Signs And Symptions Of Overexposure: HLTH HAZ: BE IRRITATING TO THE RESPIRATORY
SYSTEM. DUST FROM GRINDING, SANDING OR CUTTING OPERATIONS ON THE CURED
MATERIAL MAY CAUSE RESPIRATORY SYSTEM IRRITATION. INGESTION: MAY CAUSE
DIGESTIVE SYSTE M IRRITATION. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES.
CALL MD. SKIN: THOROUGHLY WASH AFFECTED AREA WITH SOAP AND WATER. INHALATION:
REMOVE PERSON TO UNCONTAMINATED AIR. CALL MD. INGESTION: DO NOT INDUCE
VOMITING. IMMEDIATELY CALL MD OR POISON CONTROL CENTER.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: VENTILATE THE AREA. OBSERVE THE PRECAUTIONS FROM
OTHER SECTIONS. COLLECT SPILLED MATERIALS. PLACE IN A U.S. DEPARTMENT OF
TRANSPORTATION-APPROVED METAL CONTAINER, AND SEAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: MIX PART A W/PART B. COMPLETELY CURE & DISP OF
FULLY CURED WASTE PROD IN SANITARY LANDFILL. INCIN INCURED BULK PROD AFTER
MIXING W/FLAMM MATL IN INDUS/COMMERCIAL FACILITY. DISP SHOULD BE I/A/W APPLIC
REGS. DISP OF I/A/W LOC, STATE & FED REGS (FP N).
Handling And Storage Precautions: FOR INDUS/PROFESSIONAL USE ONLY. THIS MATL IS
PART OF A TWO COMPONENT SYS. PREC FOR EACH COMPONENT SHOULD BE OBSERVED WHEN
SEPARATED/MIXED.
Other Precautions: USE ONLY W/SUFFICIENT VENT TO MAINTAIN VAP CONCS BELOW REC
EXPOS LIM. AVOID BRTHG VAPS RELEASED DURING HEAT CURING. CURING EQUIP SHOULD
BE PROPERLY VENTED TO OUTDOORS/SUITABLE EMISSION CTL DEVICE. AVO ID EYE &
SKIN CONT. AVOID EYE (SUP DAT)
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: USE CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WEAR NIOSH APPROVED DUST MASK TO AVOID DUST EXPOSURE.
Ventilation: NONE SPECIFIED BY MANUFACTURER.
Protective Gloves: IMPERVIOUS GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: ANSI APPROVED EMERGENCY EYEWASH & DELUGE SHOWER (FP
N). WEAR PROTECTIVE CLOTHING AS NECESSARY TO PREVENT SKIN CONTACT.
Work Hygienic Practices: WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health: USERS OF THE "L" VERSION OF TO CONSULT "LR"
VERSION FOR ADDITIONAL INFORMATION (FP N ). TRADE NAME/PART #: PART A GRAY
EPOXY ADHESIVE. OTHER PREC: CONT W/OR BRTHG DUST FROM CUTTING, GRINDING/SAND
ING OPERATIONS ON THE CURED PROD. KEEP CONTAINER CLOSED WHEN NOT IN USE. KEEP
OUT OF THE REACH OF CHILDREN.
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.260 (H*2O=1)
Solubility in Water: NIL
Appearance and Odor: GRAY PASTE, WITH PUNGENT ODOR
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: CARBON MONOXIDE, CARBON DIOXIDE, NITROGEN AND
SMOKE PARTICLES WHEN SUBJECTED TO EXCESSIVE HEAT OR FLAME.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 62-2217-8540-5, SCOTCH-WELD EC-2216 B/A (SUP DAT)
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 08/30/1996
Status Code: C
Label Date: 08/30/1996
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYES: EXTREMELY IRRITATING TO EYES UPON DIRECT
CONTACT. DUST FROM GRINDING, SANDING OR CUTTING OPERATIONS ON THE CURED
PRODUCT MAY CAUSE EYE IRRITATION. SKIN: MAY CAUSE SKIN IRRITATION UPON PRO
LONGED CONTACT. MAY CAUSE AN ALLERGIC SKIN REACTION IN CERTAIN INDIVIDUALS.
INHALATION: VAPORS MAY BE IRRITATING TO THE RESPIRATORY SYSTEM. DUST FROM
GRINDING, SANDING OR CUTTING OPERATIONS ON THE CUR ED MATERIAL MAY CAUSE
RESPIRATORY SYSTEM IRRITATION. INGESTION: MAY CAUSE DIGESTIVE SYSTEM
IRRITATION. CHRONIC: CANCER HAZARD. CONTAINS MATERIAL WHICH IS LISTED AS AN
ANIMAL CARCINOGEN (FP N).
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.