| MSDS | : | CF 128 FILLER FOAM | | CAS | : | 74-98-6
106-97-8
101-68-8
115-10-6
811-97-2 | | NAME | : | propane (dimethylmethane) *96-3*
butane, n-butane *96-3*
volatile organic content: 228 g/l
diphenylmethanediisocyanate (mdi), methylene bis (phenylisocyanate), 4,4
dimethyl ether, methyl ether
1,1,1,2-tetrafluoroethane (r134a)
|
| |
|
|
HILTI INC -- CF 128 FILLER FOAM
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCFYW
MSDS NAME: CF 128 FILLER FOAM
Responsible Party
Name: HILTI INC
Address: 5400 S 122ND EAST AVENUE
Box: 21148
City: TULSA OK 74121-5000
Info Phone: 918-252-6000/800-879-4444
Emergency Phone Number: 918-252-6000/800-879-4444
Preparer's Name: STEVE GERRARD
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Assigned Ind: Y
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
=======================================================
Contractor Summary
=======================================================
Name: HILTI INC
Address: 5400 S 122ND E AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800--879-6000
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800-879-6000
=======================================================
Ingredients
=======================================================
Cas: 74-98-6
RTECS #: TX2275000
Name: PROPANE (DIMETHYLMETHANE) *96-3*
Other REC Limits: 1800 MG/CUM
OSHA PEL: 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
------------------------------
Cas: 106-97-8
RTECS #: EJ4200000
Name: BUTANE, N-BUTANE *96-3*
Other REC Limits: 800 PPM
OSHA PEL: 800 PPM
ACGIH TLV: 1900 MG/CUM
------------------------------
RTECS #: 9999999VO
Name: VOLATILE ORGANIC CONTENT: 228 G/L
-----------------------------
Cas: 101-68-8
RTECS #: NQ9350000
Name: DIPHENYLMETHANEDIISOCYANATE (MDI), METHYLENE BIS (PHENYLISOCYANATE), 4,4
DIPHENYLMETHANE DIISOCYANATE (MDI)
Other REC Limits: 0.005 PPM
OSHA PEL: 0.02 PPM
ACGIH TLV: 0.051 MG/CUM
EPA Rpt Qty: 1 LB
DOT Rpt Qty: 1 LB
------------------------------
Cas: 115-10-6
RTECS #: PM4780000
Name: DIMETHYL ETHER, METHYL ETHER
ACGIH TLV: NONE
------------------------------
Cas: 811-97-2
Name: 1,1,1,2-TETRAFLUOROETHANE (R134A)
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES/SKIN: IRRITATION. INHALATION: VAPOR HEATED TO TEMPS
>100F CAN CAUSE IRRITATION OF THE BREATHING TRACT. SOME INDIVIDUALS CAN
DEVELOP AN ALLERGIC (ASTHMATIC-LIKE) RESPONSE.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: IRRITATION
Medical Cond Aggravated By Exposure: EYES, SKIN & RESPIRATORY CONDITIONS.
First Aid: EYES: WASH W/PLENTY OF WATER. SKIN: REMOVE W/SOAP & WATER. IF
HARDENED MATERIAL, USE MC 400 HAND CLEANER/MINERAL OIL. IF UNABLE TO REMOVE,
USE A PUMICE STONE. INHALATION: MOVE TO FRESH AIR. GIVE OXYGE N/CPR IF
NEEDED. INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER. DON'T INDUCE VOMITING
UNLESS DIRECTED BY A PHYSICIAN. NEVER GIVE ANYTHING BY MOUTH IF UNCONSCIOUS.
OBTAIN MEDICAL ATTENTION IN ALL CASES
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CF 128 FILLER FOAM WILL POLYMERIZE (CURE) UPON
CONTACT W/AIR/MOISTURE. ALLOW PRODUCT TO CURE, THEN REMOVE FOR DISPOSAL.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS.
Handling And Storage Precautions: STORE IN A COOL, DRY PLACE. DON'T STORE IN
DIRECT SUNLIGHT. DON'T STORE >100F. KEEP FROM FREEZING. KEEP AWAY FROM
CHILDREN. CONTENTS UNDER PRESSURE.
Other Precautions: AVOID CONTACT W/EYES & SKIN. MATERIAL WILL ADHERE TO
SKIN.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: <0F PROPELLANTS
Lower Limits: 4
Upper Limits: 18
Extinguishing Media: CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures: WEAR FULL PROTECTIVE CLOTHING. USE A SELF CONTAINED
BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING CHEMICALS.
Unusual Fire/Explosion Hazard: CAN EXPOSED TO FIRE CAN RUPTURE FROM PRESSURE
BUILD-UP & BE PROPELLED THROUGH THE AIR.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NOT NORMALLY REQUIRED
Ventilation: GENERAL (NATURAL/MECHANICALLY INDUCED FRESH AIR MOVEMENTS THAT
MAINTAIN VAPOR CONCENTRATIONS <RECOMMENDED EXPOSURE LIMIT
Protective Gloves: COTTON
Eye Protection: GOGGLES, SAFETY GLASSES W/SIDESHIELDS
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: 44
Vapor Density: >1
Spec Gravity: 1.15
Solubility in Water: INSOLUBLE
Appearance and Odor: BROWN LIQUID EXPANDING TO FOAM ON CONTACT W/AIR. SWEET
ETHEREAL ODOR
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: AIR, MOISTURE, FREEZING, DIRECT SUNLIGHT, HEAT,
SPARKS, OPEN FLAMES & OTHER IGNITION SOURCES
Materials To Avoid: WATER, ALCOHOLS, STRONG BASES, ALKALI METAL COMPOUNDS
Hazardous Decomposition Products: CO, CO2, CYANIDE, ISOCYANATES, NITROGEN
OXIDES, CHLORINE, PHOSPHORUS OXIDES
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: EXCESS HEAT. CONTACT W/AIR/MOISTURE WILL
CAUSE FOAM TO POLYMERIZE (CURE).
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: CF 128 FILLER FOAM
Assigned IND: Y
Company: HILTI INC
Street: 5400 S 122ND EAST AVE
PO Box: 21148
City: TULSA OK
Zipcode: 74121
Health Emergency Phone: 918-252-6000/800-879-4444
Label Required IND: Y
Date Of Label Review: 10/12/1999
Status Code: A
Origination Code: G
Hazard And Precautions: EYES/SKIN: IRRITATION. INHALATION: VAPOR HEATED TO
TEMPS >100F CAN CAUSE IRRITATION OF THE BREATHING TRACT. SOME INDIVIDUALS
CAN DEVELOP AN ALLERGIC (ASTHMATIC-LIKE) RESPONSE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|