3M, INDUSTRIAL SPECIALTIES DIV -- EC-3448 STRUCTURAL ADHESIVE SCOTCH-WELD
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 01-308-8427
MSDS Num: CCKHK
MSDS NAME: EC-3448 STRUCTURAL ADHESIVE SCOTCH-WELD
Responsible Party
Name: 3M, INDUSTRIAL SPECIALTIES DIVISION
Address: 3M CENTER
City: SAINT PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING & MFG CO INDUSTRIAL TAPE & SPECIALTIES DIV
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Phone: 1-800-364-3577
=======================================================
Item Description Information
=======================================================
Item Manager: GSA
Item Name: ADHESIVE
Unit of Issue: CA
Quantitative Expression: 00000000006OZ
UI Container Qty: 0
=======================================================
Ingredients
=======================================================
Cas: 25068-38-6
RTECS #: SL6475000
Name: BISPHENOL A-EPICHLOROHYDRIN COPOLYMER
% Wt: 40-70
Other REC Limits: NONE RECOMMENDED
OSHA PEL: NOT ESTABLISHED
ACGIH TLV: NOT ESTABLISHED
------------------------------
Cas: 14228-73-0
Name: 1,4-BIS(GLYCIDYOXYMETHYL)CYCLOHEXANE
% Wt: 10-30
Other REC Limits: NONE RECOMMENDED
OSHA PEL: NOT ESTABLISHED
ACGIH TLV: NOT ESTABLISHED
------------------------------
Cas: 108-46-3
RTECS #: VG9625000
Name: RESORCINOL (CERCLA)
% Wt: 7-13
Other REC Limits: NONE RECOMMENDED
OSHA PEL: 10 PPM
ACGIH TLV: 10 PPM/20 STEL; 9596
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Name: AMIDE TRADE SECRET
% Wt: 7-13
Other REC Limits: NONE RECOMMENDED
OSHA PEL: NOT ESTABLISHED
ACGIH TLV: NOT ESTABLISHED
-----------------------------
Cas: 112945-52-5
RTECS #: VV7310000
Name: SILICA GEL
% Wt: 1-5
Other REC Limits: NONE RECOMMENDED
OSHA PEL: 6 MG/M3
ACGIH TLV: 10 MG/M3
------------------------------
Name: AMINE PROPRIETARY (POLYDIALKYL)
% Wt: 5-10
Other REC Limits: NONE RECOMMENDED
OSHA PEL: NOT ESTABLISHED
ACGIH TLV: NOT ESTABLISHED
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NOT GIVEN FOR PRODUCT AS A WHOLE
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: CONTACT MAY CAUSE MILD EYE IRRITATION. DUST MAY CAUSE EYE
IRRITATION. SKIN CONTACT MAY CAUSE ALLERGIC SKIN REACTION, MILD SKIN
IRRITATION. INHALATION MAY CAUSE UPPER RESPIRATORY IRRITATION. DUST FORM
CUTTING, GRINDING, SANDING OR MACHININGMAY CAUSE IRRITATION. INGESTION MAY
CAUSE IRRITATION OF GASTROINTESTINAL TISSUE.
Explanation Of Carcinogenicity: THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Signs And Symptions Of Overexposure: EYES: REDNESS, SWELLING, PAIN, TEARING.
SKIN: REDNESS, SWELLING, BLISTERING, ITCHING. INHALATION: SORENESS OF THE
NOSE AND THROAT, COUGHING, SNEEZING. INGESTION: PAIN, VOMITING, ABDOMINAL
TENDERNESS, NAUSEA, BLOOD IN VOMITIUS AND BLOOD IN FECES.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS OPEN.
GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND
WATER. IF IRRITATION PERSIST, GET MEDICAL ATTENTION. INH ALATION: REMOVE TO
FRESH AIR. RESTORE BREATHING. GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE
VOMITING. DRINK 2 GLASSES OF WATER. GET MEDICAL ATTENTION.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF MSDS FOR INFORMATION
REGARDING PHYSICAL AND HEALTH HAZARDS, PPE. COLLECT SPILLED MATERIAL. PLACE
IN CONTAINER FOR DISPOSAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CURE PRODUCT ACCORDING TO PRODUCT INSTRUCTIONS.
INCINERATE UNCURED WASTE IN AN INDUSTRIAL OR COMEERCIAL INCINERATOR. DIPOSE
OF COMPLETELY CURED MATERIAL IN A SANITARY LANDFILL.
Handling And Storage Precautions: DO NOT EATE, DRINK OR SMOKE WHEN USING THIS
PRODUCT. WASH EXPOSED AREAS THOROUGHLY WITH SOAP AND WATER. STORE AT
TEMPERATURES BELOW 0F.
Other Precautions: ALLOW MATERIAL TO RETURN TO ROOM TEMPERATURE BEFORE USE.
KEEP OUT OF REACH OF CHILDREN.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: >200F,>93C
Lower Limits: NOT GIVEN
Upper Limits: NOT GIVEN
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM
Fire Fighting Procedures: FIRE FIGHTERS SHOULD WEAR SELF CONTAINED BREATHING
APPARATUS AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard: CLOSED CONTAINERS EXPOSED TO HEAT FROM FIRE MAY
BUILD PRESSURE AND EXPLODE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID BREATHING OF VAPORS CREATED DURING CURE CYCLE.
AVOID BREATHING DUST CREATED BY CUTTING, SANDING OR GRINDING. USE A HALF-MASK
DUST RESPIRATOR IF NECESSARY.
Ventilation: LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION AS REQUIRED TO
MAINTAIN EXPOSURE LEVELS.
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL ALCOHOL, PVA
Eye Protection: VENTED GOGGLES, SAFETY GLASSES W/SHIELDS
Other Protective Equipment: CHEMICAL RESISTANT CLOTHING AS NECESSARY TO PREVENT
SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE AVAILABLE.
Work Hygienic Practices: WASH HANDS THOROUGHLY WITH SOAP AND WATER BEFORE
EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health: USE WATER AS A LUBRICANT ON MACHINING TOOLS TO
ELIMINATE DUST AND IMPROVE MACHINABILITY OF CURED PARTS.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: V7
B.P. Text: NOT GIVEN
M.P/F.P Text: NOT GIVEN
Decomp Text: UNKNOWN
Vapor Pres: NOT GIVEN
Vapor Density: NOT GIVEN
Spec Gravity: 1.0
Evaporation Rate & Reference: NOT GIVEN
Solubility in Water: NOT SOLUBLE
Appearance and Odor: LIGHT TAN PASTE, EPOXY ODOR
Percent Volatiles by Volume: 0 %
Corrosion Rate: UNKNOWN
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT
Materials To Avoid: STRONG OXIDIZING AGENTS
Hazardous Decomposition Products: CARBON MONOXIDE, CARBON DIOXIDE, OXIDES OF
NITROGEN, HYDROGEN CYANIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NONE. WILL NOT OCCUR.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
Transportation Information
=======================================================
Trans ID NO: 124110
MSDS NAME: EC-3448 STRUCTURAL ADHESIVE SCOTCH-WELD
MSDS Prepared Date: 08/26/1996
Review Date: 12/09/1996
Multiple KIT Number: 0
Review IND: Y
Unit Of Issue: CA
Container QTY: 0
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: EC-3448 STRUCTURAL ADHESIVE SCOTCH-WELD
Company: MINNESOTA MINING & MFG CO INDUSTRIAL TAPE & SPECIALTIES
DIV
Street: 3M CENTER
City: ST PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 12/09/1996
Status Code: C
MFG Label NO: NONE
Label Date: 12/09/1996
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: Slight
Hazard And Precautions: DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH EXPOSED AREAS THOROUGHLY WITH SOAP AND WATER. STORE AT TEMPERATURES
BELOW 0F. FIRST AID: EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EY
ELIDS OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH
WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL ATTENTION.
INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET M EDICAL ATTENTION.
INGESTION: DO NOT INDUCE VOMITING. DRINK 2 GLASSES OF WATER. GET MEDICAL
ATTENTION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|