HILTI INC -- CC400EP EPOXY SEALER, PART B
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CFLPG
MSDS NAME: CC400EP EPOXY SEALER, PART B
Responsible Party
Name: HILTI INC
Box: 21148
City: TULSA OK 74121
Info Phone: 800-879-6000
Emergency Phone Number: 800-879-4444
Preparer's Name: STEVE GERRARD
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: HILTI INC
Address: 5400 S 122ND E AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800--879-6000
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800-879-6000
=======================================================
Ingredients
=======================================================
Cas: 25068-38-6
RTECS #: SL6475000
Name: BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (MODIFIED DIGLYCIDYL ETHER OF
BISPHENOL A)
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Name: ALIPHATIC GLYCIDYL ETHER; (ALKYL GLYCIDYL ETHER)
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES: IRRITATION. CORNEAL INJURY IS NOT LIKELY. SKIN:
IRRITATION. CAN CAUSE ALLERGIC SKIN REACTIONS (EG RASH, REDNESS, ITCHING) IN
SUSCEPTIBLE INDIVIDUALS. INHALATION: NO EFFECTS EXPECTED. HEATED VAPO RS CAN
CAUSE IRRITATION. SENSITIZATION.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: EYE, SKIN AND RESPIRATORY CONDITIONS.
First Aid: EYES: IMMED FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN. CALL MD.
SKIN: WASH W/SOAP & WATER. LAUNDER CONTAMD CLTHG BEFORE REUSE. INHAL: IF
ILL EFTS OCCUR, MOVE TO FRESH AIR. CALL MD IF SYMPS PERSIST. INGEST: IF
CONSCIOUS, GIVE PLENTY OF WATER TO DRINK. SEEK MED ATTN. DO NOT INDUCE VOMIT
UNLESS DIRECTED TO BY MD. NEVER GIVE ANYTHING BY MOUTH TO UNCON PERSON.
OTHER: REFERRAL TO MD IS RECOMD (SUPDAT)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE SPILLAGE WITH ABSORBENT MATERIAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CONSULT WITH REGULATORY AGENCIES OR CORPORATE PERSONNEL
FOR DISPOSAL METHODS THAT COMPLY WITH LOCAL, STATE AND FEDERAL HEALTH AND
ENVIRONMENTAL REGULATIONS.
Handling And Storage Precautions: STORE IN COOL, DRY PLACE. KEEP FROM FREEZING.
STORE BELOW 100F. KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions: AVOID CONTACT WITH EYES, SKIN OR CLOTHING. WASH THOROUGHLY
AFTER HANDLING.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: >200F,>93C
Extinguishing Media: MEDIA SUITABLE FOR SURROUNDING FIRE (FP N).
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N).
Unusual Fire/Explosion Hazard: THERMAL DECOMPOSITION AND COMBUSTION PRODUCTS
CAN BE FORMED.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE NORMALLY REQD W/ADEQUATE VENTILATION. USE A NIOSH
APPRVD ORGANIC VAPOR CARTRIDGE RESPIRATOR WHEN WORKING IN AREAS W/LITTLE OR
NO AIR MOVEMENT. NEVER ENTER A CONFINED SPACE UNLESS WEARING AN APPRO P NIOSH
APPRVD AIR-SUPPLIED RESPIRATIOR.
Ventilation: GENERAL, IE NATURAL OR MECHANICALLY INDUCED FRESH AIR MOVEMENTS.
Protective Gloves: COTTON OR IMPERVIOUS (NEOPRENE/RUBBER).
Eye Protection: ANSI APPRVD CHEM WORKER GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH AND DELUGE SHOWER (FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: FIRST AID PROC: IF THERE IS ANY QUESTION ABOUT
THE SERIOUSNESS OF INJURY/EXPOSURE.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 200F,93C
Spec Gravity: 1.1
Solubility in Water: NIL
Appearance and Odor: VISCOUS WHITE LIQUID; SLIGHT ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXCESSIVE HEAT FOR PROLONGED PERIODS OF TIME.
REACTIONS WITH SOME CURING AGENTS CAN GENERATE LARGE AMOUNTS OF HEAT.
Materials To Avoid: STRONG OXIDIZERS, PEROXIDES, ACIDS.
Hazardous Decomposition Products: THERMAL DECOMPOSITION CAN YIELD CARBON
MONOXIDE, CARBON DIOXIDE, ALDEHYDES AND ACIDS.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
Other Information: VOLATILE ORGANIC CONTENT: NONE.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: CC400EP EPOXY SEALER, PART B
Assigned IND: Y
Company: HILTI INC
Street: 5400 S 122ND EAST AVE
PO Box: 21148
City: TULSA OK
Zipcode: 74121
Health Emergency Phone: 800-879-4444
Label Required IND: Y
Date Of Label Review: 10/23/1997
Status Code: C
Label Date: 10/23/1997
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYES: IRRITATION. SKIN: IRRITATION. CAN CAUSE
ALLERGIC SKIN REACTIONS (EG RASH, REDNESS, ITCHING) IN SUSCEPTIBLE
INDIVIDUALS. INHALATION: HEATED VAPORS CAN CAUSE IRRITATION. CHRONIC:
SENSITIZAT ION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
AQUAPLAS DL-10M
| 7732-18-5
12001-26-2
1332-58-7
108-05-4
76902-90-4
85-68-7
9003-04-7
497-19-8
7632-00-0 |
|
AQUAPLAS DL-30
| 7732-18-5
12001-26-2
1332-58-7
108-05-4
76902-90-4
85-68-7
9003-04-7
497-19-8
7632-00-0 |
|
VW35H
| 100-37-8 |
|
VW35H CREPE
| 100-37-8 |
|
VW60H
| 100-37-8 |
|
VW60H CREPE
| 100-37-8 |
|
VW70H
| 100-37-8 |
|
PORTLAND CEMENT
| 12168-85-3
10034-77-2
12042-78-3
12612-16-7
13397-24-5
1305-78-8
1309-48-4
7757-82-6
7778-80-5
14808-60-7
7440-47-3 |
|
INCOR PORTLAND CEMENT
| 12168-85-3
10034-77-2
12042-78-3
12612-16-7
13397-24-5
1305-78-8
1309-48-4
7757-82-6
7778-80-5
14808-60-7
7440-47-3 |
|
EASY ARC 308 AC-DC, AWS E308-16
| 7440-47-3
13463-67-7
7440-02-0
1332-58-7
1317-65-3
1344-09-8
7439-96-5
14808-60-7
7789-75-5
65996-67-0
7440-21-3
7439-89-6 |
|
DYNABARK BRAND 3900 PROTECTIVE COATING, AEROSOL
| 75-09-2
74-98-6
108-94-1
628-63-7
123-86-4
67-64-1
624-41-9
64742-89-8
108-88-3
9003-63-8
71-36-3
9004-70-0
108-10-1
67-63-0
123-92-2
1330-20-7 |
|
PD ACTIVATOR, 28-0080
| |
|
002028 LPS TKX
| 64742-47-8
64742-53-6
112-34-5
124-38-9 |
|
002005 LPS TKX
| 64742-47-8
64742-53-6
112-34-5
124-38-9 |
|
002055 LPS TKX
| 124-38-9
64742-47-8
64742-53-6
112-34-5 |
|
DURO SUPER GLUE 5 UP-1,2 GR,01801,311-0970
| 7085-85-0
9011-14-7
123-31-9 |
|
2-1143 SILICONE BRAKE FLUID
| |
|
TIN LEAD SOLDER
| 7439-92-1
7440-31-5
7440-69-9
7440-36-0
7440-50-8
7440-38-2
7439-89-6
7429-90-5
7440-66-6 |
|
W-110-XCN WHITE FLEXIBLE GEL COAT
| |
|
H-156
| |
|
HYSOL PC18N
| |
|
ACCELERATOR 19 ADHESIVE
| |
|
ISOBUTYLENE IN AIR,0.01 %,DC 102573,101-350-N
| 115-11-7 |
|
C2204 NAVY DAMP 2 TILE/ISODAMP CN DAMPING TILE
| |
|
SUNSECT LOTION (SPF 15)
| |
|
HP COLOR LASERJET TONER,C 3103 A
| |
|
ZOK 27 GAS TURBINE COMPRESSOR CLEANER
| |
|
CERAM-KOTE 54 (BASE)
| |
|
CERAM-KOTE 54 PART B
| |
|
GARD ANTI RUST SAE 10W (PRESERVATION BREAK-IN OIL
| |
|
VV-C-846A CUTTING FLUID
| |
|
TECTYL 940
| |
|
PURPLE-K DRY CHEMICAL POTASSIUM BICARBONATE,KDC,PK,479
| |
|
HP C3105A (BLACK) HP COLOR LASERJET TONER
| |
|
SCATTER GRANULAR ODOR COUNTERACTANT
| |
|
MOTOR MUSCLE CARBURATOR & CHOKE CLEANER,137 DA,18-6564
| 1330-20-7
67-64-1
74-98-6
67-63-0
67-56-1 |
|
VCI-560 POWDER
| |
|
ANTI RUST SAE 10 W
| |
|
TECTYL 891 CLASS I
| |
|
PERMA-SLIK 1460W (10-681)
| |
|
NP-6000/7000/8000 SERIES TONER BLACK
| |
|
GS-3/E FLUORESCENT ADDITIVE
| |
|
PRONTO CA-7 INSTANT ADHESIVE, 62-3812-0330-6
| 137-05-3
9011-14-7
123-31-9 |
|
DERUSTO RPE SPRAY GUIDE 751 S.G. DK RED
| |
|
UNOCAL UNAX AW 100, 04644
| 64742-54-7
64742-65-0
64742-56-9
64742-57-0
64742-62-7 |
|
NUTO H 46, 353012-01336
| |
|
CC400EP EPOXY SEALER, PART B
| 25068-38-6 |
|
UCON COATING FLUID LB-1145-Y24
| |
|
PRONTO CA-5 INSTANT ADHESIVE
| 7085-85-0
9011-14-7
123-31-9 |
|
SILICONE SEALANT, SCS1009
| |
|
|