DEXTER AEROSPACE -- HYSOL EA 9396 GAL SYSTEM, A59280018, PART A
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CGDDS
MSDS NAME: HYSOL EA 9396 GAL SYSTEM, A59280018, PART A
Kit Part: Y
Responsible Party
Name: DEXTER AEROSPACE
Address: 2850 WILLOW PASS RD
City: PITTSBURG CA 94565-3299
Info Phone: 202-483-7616;800-424-9300(CHEMTREC)
Emergency Phone Number: 800-424-9300(CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Address: 2850 WILLOW PASS ROAD
Box: 312
City: BAY POINT CA 94565-3299
Phone: 202-483-7616
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:BRIEF CONTACT MAY IRRITATE SKIN OR CAUSE A RASH.
CHRONIC:REPEATED OR PROLONGED SKIN CONTACT MAY RESULT IN ALLERGIC
SENSITIZATION.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SKIN RASH, IRRITATION.
Medical Cond Aggravated By Exposure: SKIN SENSITIZATION.
First Aid: EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS,
GET MEDICAL ATTENTION. SKIN:WASH THOROUGHLY W/SOAP & WATER. IF IRRITATION
PERSISTS, GET MEDICAL ATTENTION. INHAL:REMOVE VICTIM TO FR ESH AIR. IF
SYMPTOMS PERSIST, GET MEDICAL ATTENTION. INGEST:DRINK PLENTY OF WATER. GET
MEDICAL ATTENTION IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR PROTECTIVE CLOTHING, GLOVES & SAFETY
GLASSES. SCRAPE UP & SHOVEL INTO DOT APPROVED WASTE CONTAINERS.
Waste Disposal Methods: DISP MUST BE I/A/W FED, STATE & LOC REGS (FP N).
THIS MATL, AS A WASTE, IS NOT CONSIDERED A RCRA HAZ WASTE. HOWEVER, INCIN IN
AN EPA-APPRVD WASTE INCIN IS PREF DISP PRACTICE. CHEM ADDNS, PROCESSING/OT
HERWISE ALTERING THIS MATL MAY MAKE WASTE (SUPDAT)
Handling And Storage Precautions: REFRIGERATED STORAGE IS RECOMMENDED TO
MAINTAIN PRODUCT QUALITY. THIS PRODUCT MAY BE STORED AT ROOM TEMPERATURE
(77F) FOR UP TO 12 MONTHS.
Other Precautions: FOLLOW CURING SCHEDULE AS RECOMMENDED IN PRODUCT LITERATURE.
DO NOT CUT, GRIND, WELD OR DRILL ON OR NEAR THIS CONTAINER. WARNING! CAUSES
EYE IRRITATION & MAY CAUSE SKIN IRRITATION. CONTAINS EPOXY RESI NS. AVOID
CONTACT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: DRY CHEMICAL, HALON FIRE EXTINGUISHER, WATER SPRAY, FOAM
OR FOG.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). NIOSH APPROVED CARTRIDGE RESPS DO NOT PROVIDE ADEQ PROT FOR
FIRE FIGHTERS/EXOTHERM MITIGATION.
Unusual Fire/Explosion Hazard: MAY LIBERATE LARGE QUANTITIES OF DENSE
FOUL-SMELLING SMOKE WHICH MAY CONTAIN UNIDENTIFIED TOXIC GASES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN (FP N). UNNECESSARY W/ADEQUATE EXHAUST VENTILATION.
Ventilation: LOCAL EXHAUST VENTILATION AT POINT OF USE.
Protective Gloves: BUTYL RUBBER, PVC/NITRILE RUBBER GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: WASH AFTER HANDLING.
Supplemental Safety and Health: NOTE:USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). CNDTNS(POLYM):MIXED ADHESIVE >125F UNLESS
CURING SURFS TO BE BONDED. FAILURE TO OBSERVE THESE PRECS MAY RSLT IN
EXCESSIVE H EAT BUILD-UP CAUSING EXOTHERM. EXOTHERMHAS POTNTL FOR RELS OF TOX
GASSES. WASTE DISP METH:MANAGEMENT INFO HEREIN
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: NIL
Vapor Density: >1
Spec Gravity: 1.16 (H*2O=1)
VOC Grams/Liter: 9
Solubility in Water: NEGLIGIBLE
Appearance and Odor: BLUE PASTE W/SLIGHT ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products: CO, NO*X, ALDEHYDES, ACIDS & UNDETERMINED
ORGANICS.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: AVOID MIXING RESIN (PART A) & CURING AGENT
(PART B) IN BATCHES >1 LB UNLESS YOU PLAN TO USE IMMED. DO NOT HEAT (SUPDAT)
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
Other Information: VOLATILE ORGANIC COMPOUNDS (TEST METHOD): <10 G/L
(ESTIMATE).
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: HYSOL EA 9396 GAL SYSTEM, A59280018, PART A
Company: DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
Street: 2850 WILLOW PASS ROAD
PO Box: 312
City: BAY POINT CA
Zipcode: 94565-3299
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 01/23/1998
Status Code: C
Label Date: 01/23/1998
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: None
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE:BRIEF CONTACT MAY IRRITATE SKIN OR CAUSE A RASH.
CHRONIC:REPEATED OR PROLONGED SKIN CONTACT MAY RESULT IN ALLERGIC
SENSITIZATION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.