ITW DEVCON -- 1-MINUTE EPOXY GEL HARDENER, 0218
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJJDY
MSDS NAME: 1-MINUTE EPOXY GEL HARDENER, 0218
Kit Part: Y
Responsible Party
Name: ITW DEVCON
Address: 30 ENDICOTT ST
City: DANVERS MA 01923-3753
Info Phone: 978-777-1100
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Resp. Party Other MSDS No.: 14277
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DEVCON CORP
Address: 30 ENDICOTT ST
City: DANVERS MA 01923-3753
Phone: 1-508-777-1100
=======================================================
Ingredients
=======================================================
Name: POLYAMIDE-POLYMERCAPTAN EPOXY HARDENER
> Wt: 80.
Other REC Limits: N/K (FP N)
OSHA PEL: N/K (FP N)
OSHA STEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
ACGIH STEL: N/K (FP N)
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: LD50 (ORAL, RAT): > 3 G/KG.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: SKIN: CORROSIVE. SEVERE IRRITANT. POTENTIAL SKIN
SENSITIZER. EYES: CAUSES IRRITATION OR BURNS. MAY CAUSE PERMANENT VISUAL
IMPAIRMENT. INHALATION: MAY CAUSE IRRITATION. INGESTION: MAY CAUSE IRRI
TATION OF THE GASTROINTESTINAL TRACT, NAUSEA, AND VOMITING. CHRONIC:
POTENTIAL SKIN SENSITIZER, EVIDENCED BY DELAYED ALLERGIC SKIN REACTION (RASH,
ITCHING, REDNESS, ETC). OTHER EFFECTS: NO DATA AVAILA BLE.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: DERMATITIS, LUNG INJURY OR CHEMICAL
PNEUMONIA. MAY AGGRAVATE EXISTING SKIN, EYE, AND LUNG CONDITIONS.
First Aid: EYES: FLUSH WITH CLEAN WATER FOR AT LEAST 15 MINUTES WHILE GENTLY
HOLDING EYELIDS OPEN. GET IMMEDIATE MEDICAL ATTENTION. SKIN: REMOVE
CONTAMINATED CLOTHING AND SHOES. WASH THOROUGHLY WITH SOAP AND WAR M WATER.
CONSULT A PHYSICIAN IF IRRITATION DEVELOPS. INHALATION: REMOVE PATIENT TO
FRESH AIR. INGESTION: DO NOT INDUCE VOMITING. GIVE LARGE AMOUNTS OF WATER OR
MILK. GET MEDICAL ATTENTION.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: AVOID PERS CONT. ELIM IGNIT SOURCES. VENT AREA. DIKE,
CONTAIN & ABSORB W/CLAY, SAND/OTHER SUITABLE MATL. FOR LGE SPILLS, PUMP
TO STOR/SALVAGE VESSELS. SOAK UP RESIDUE W/ABSORB SUCH AS CLAY, SAND/OTHER
SUITABLE MATL & DISPOSE OF PROPERLY. FLUSH AREA W/WATER TO REMOVE TRACE
RESIDUE. PVNT SPILL FROM ENTERING DRAINAGE/SEWER SYS, WATERWAYS, & SURF
WATERS.
Waste Disposal Methods: PLEASE SEE ALSO REGULATORY INFORMATION SECTION. IF THIS
MATERIAL BECOMES A WASTE, IT WOULD NOT BE A HAZARDOUS WASTE BY RCRA CRITERIA
(40 CFR 261). DISPOSE OF ACCORDING TO APPLICABLE FEDERAL, STATE, AN D LOCAL
REGULATIONS.
Handling And Storage Precautions: AVOID CONTACT WITH SKIN, EYES OR CLOTHING.
HANDLE MIXED RESIN AND HARDENER IN ACCORDANCE WITH THE POTENTIAL HAZARD OF
THE CURING AGENT USED.
Other Precautions: PROVIDE APPROPRIATE VENTILATION/NIOSH APPROVED RESPIRATORY
PROTECTION AGAINST DECOMPOSITION PRODUCTS DURING WELDING/FLAME CUTTING
OPERATIONS AND TO PROTECT AGAINST NUISANCE DUST DURING SANDING/GRINDIN G OF
CURED PROD. STORE IN A COOL, DRY AREA AWAY FROM HIGH TEMPERATURES AND FLAMES.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point: >93.3C, 200.F
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: TOXIC SMOKE AND VAPORS MAY FORM DURING
DECOMPOSITION. HAZARDOUS PRODUCTS OF COMBUSTION: CARBON DIOXIDE, CARBON
MONOXIDE, OXIDES OF NITROGEN AND SULFUR, HYDROGEN SULFIDE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE REQUIRED IN NORMAL USE WITH PROPER VENTILATION. IF
VENTILATION INADEQUATE, USE NIOSH APPROVED RESPIRATOR.
Ventilation: LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS. GENERAL
MECHANICAL VENTILATION IS ADEQUATE FOR NORMAL USE.
Protective Gloves: CHEMICAL-RESISTANT RUBBER GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES AND FULL LENGTH
FACESHIELD (FP N).
Other Protective Equipment: EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N).
Work Hygienic Practices: WASH THORO W/SOAP & WATER AFTER USING & ESP BEFORE
EATING, DRINKING, SMKNG, APPLYING COSMETICS/USING TOILET FACILITIES. LAUNDER
CONTAM CLOTHING & PROT GEAR BEFORE REUSE. DISCARD CONTAM LEATHER ARTICLES.
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: <1 MMHG @ 0F
Spec Gravity: 1.12
Solubility in Water: APPRECIABLE
Appearance and Odor: VISCOUS, AMBER LIQUID WITH MERCAPTAN ODOR.
Percent Volatiles by Volume: 0
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: OPEN FLAME AND EXTREME HEAT.
Materials To Avoid: STRONG OXIDIZING AGENTS. AMINES.
Hazardous Decomposition Products: CARBON DIOXIDE, CARBON MONOXIDE, OXIDES OF
NITROGEN AND SULFUR, HYDROGEN SULFIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WHEN THIS MATERIAL IS MIXED WITH AN EPOXY
RESIN, HEAT IS GENERATED; BE CAREFUL WHEN MIXING MORE THAN AN OUNCE.
=======================================================
Toxicological Information
=======================================================
Toxicological Information: ACUTE DERMAL EFFECTS: LD50 (RABBIT): NO DATA; SEVERE
SKIN IRRITANT PER RABBIT SKIN IRRITATION TEST (6.62/8.0). ACUTE INHALATION
EFFECTS: LC50 (RAT): NO DATA; EXPOSURE: 0 HOURS. EYE IRRITATION: NO DATA
AVAILABLE. SUBCHRONIC EFFECTS: NO DATA AVAILABLE. CARCINOGENICITY,
TERATOGENICITY, AND MUTAGENICITY: NO DATA AVAILABLE. OTHER CHRONIC EFFECTS:
NO DATA AVAILABLE. TOXICOLOGICAL INFORMATION ON HAZARDOU S CHEMICAL
CONSTITUENTS OF THIS PRODUCT: POLYAMIDE-POLYMERCAPTAN EPOXY HARDENER: ORAL
LD50 (RAT): > 3 G/KG; DERMAL LD50 (RABBIT): N/K; INHALATION LC50 (RAT):
N/K.
=======================================================
Ecological Information
=======================================================
Ecological: ECOTOXICITY: NO DATA AVAILABLE. MOBILITY AND PERSISTENCE: NO DATA
AVAILABLE. ENVIRONMENTAL FATE: NO DATA AVAILABLE.
=======================================================
MSDS Transport Information
=======================================================
Transport Information: PROPER SHIPPING NAME: CORROSIVE LIQUID, BASIC, ORGANIC,
N.O.S. (DEPENDING UPON THE SIZE AND TYPE OF CONTAINER, THIS MATERIAL MAY BE
RECLASSIFIED AS "CONSUMER COMMODITY, ORM-D" FOR SHIPMENTS WITHIN THE UNITED
STATES, OR "LIMITED QUANTITY" ELSEWHERE. REFER TO THE APPROPRIATE
REGULATION.); TECHNICAL NAME: MERCAPTAN/AMINE BLEND; HAZARD CLASS: 8; UN
NUMBER: 3267; PACKING GROUP: III; EMERGENCY RESPONSE GUIDE #: 153; IMDG PAGE
NUMBER: 8147-1.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: SARA SECTION 301 EXTREMELY HAZARDOUS SUBSTANCES:
NONE. SARA SECTION 313 TOXIC CHEMICALS: NONE. FOR PURPOSES OF SARA SECTION
312 HAZARDOUS MATERIALS INVENTORY REPORTING, THE FOLLOWING HAZARD CLASSES AP
PLY TO THIS MATERIAL: IMMEDIATE HEALTH HAZARD - DELAYED HEALTH HAZARD.
Federal Regulatory Information: U.S. FEDERAL REGULATIONS: TSCA: ALL INGREDIENTS
OF THIS PRODUCT ARE LISTED, OR ARE EXEMPT FROM LISTING, ON THE TSCA
INVENTORY. TSCA 12B EXPORT NOTIFICATION: NOT REQUIRED. THE FOLLOWING RCRA
CODE(S) AP PLIES TO THIS MATERIAL IF IT BECOMES WASTE: NONE. CERCLA RQ (LBS):
0.0. CANADIAN REGULATIONS: W HAZARD CLASS(ES): D2B; E.
=======================================================
Other Information
=======================================================
Other Information: VOC: 0 GRAMS/LITER. PERCENT SOLIDS BY WEIGHT: 100. RATINGS:
HEALTH: 3; FLAMMABILITY: 1; REACTIVITY: 0.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 1-MINUTE EPOXY GEL HARDENER, 0218
Company: DEVCON CORP
Street: 30 ENDICOTT ST
City: DANVERS MA
Zipcode: 01923-3753
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 07/22/1999
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: SKIN: CORROSIVE. SEVERE IRRITANT. POTENTIAL SKIN
SENSITIZER. EYES: CAUSES IRRITATION OR BURNS. MAY CAUSE PERMANENT VISUAL
IMPAIRMENT. INHALATION: MAY CAUSE IRRITATION. INGESTION: MAY CAUSE IRRI
TATION OF THE GASTROINTESTINAL TRACT, NAUSEA, AND VOMITING. CHRONIC:
POTENTIAL SKIN SENSITIZER, EVIDENCED BY DELAYED ALLERGIC SKIN REACTION (RASH,
ITCHING, REDNESS, ETC). OTHER EFFECTS: NO DATA AVAILA BLE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|