3M GENERAL OFFICES -- SCOTCH-WELD DP-105 PART B CLEAR EPOXY ADHESIV
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CJJYK
MSDS NAME: SCOTCH-WELD DP-105 PART B CLEAR EPOXY ADHESIVE
Kit Part: Y
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 800-364-3577
Emergency Phone Number: 651-737-6501
Resp. Party Other MSDS No.: 05-6781-8
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Cas: 30583-72-3
Name: EPOXY RESIN
% low Wt: 70.
% high Wt: 80.
-----------------------------
Cas: 25068-38-6
RTECS #: CE6880000
Name: EPOXY RESIN
% low Wt: 20.
% high Wt: 30.
------------------------------
Cas: 2530-83-8
RTECS #: VV4025000
Name: SILANE, 3-(2,3-EPOXYPROPOXY) PROPYLTRIMETHOXY-; (ORGANOSILANE)
% low Wt: .5
% high Wt: 1.5
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE CNTCT: MOD EYE IRRIT: SIGNS/SYMPS CAN INCL REDNESS,
SWELLING, PAIN, TEARING & HAZY VISION. VAPORS FROM HEATED MATL MAY CAUSE
EYE IRRIT. DUST CREATED BY CUTTING, GRINDING, SANDING OR MACHINING MAY CAUSE
EYE IRRIT. SKIN CNTCT: ALLERGIC SKIN REACTION: SIGNS/SYMPS CAN INCL REDNESS,
SWELL, BLISTERING & ITCH. MILD SKIN IRRIT: SIGNS/SYMPS CAN INCL REDNESS,
SWELL & ITCHING. INHAL: IRRIT (UPPER RESP): SIGNS/SYMPS CAN INCL
SORENESS OF NOSE & THROAT, COUGH & SNEEZING. VAPS OF HEATED MATL MAY
CAUSE RESP SYS IRRIT. DUST FROM CUTTING, GRINDING, SANDING OR MACHINING MAY
CAUSE IRRIT OF RESP SYS. INGEST: I NGEST MAY CAUSE: (SYMPS OF OVEREXP)
Signs And Symptions Of Overexposure: HLTH HAZS: IRRIT OF GI TISSUES:
SIGNS/SYMPS CAN INCL PAIN, VOMIT, ABDOM TENDERNESS, NAUS, BLOOD IN VOMITUS
& BLOOD IN FECES. OTHER INFO: EXPOS TO THIS MATL IN NORM STORAGE &
HNDLG HAS NOT BEEN REPORTE D TO CAUSE SIGNIFICANT ADVERSE HLTH EFTS. HOWEVER,
UNDER NORMAL PROCESSING CNDTNS, EG GRINDING OR HEATING, THIS PROD MAY RELEASE
FUMES & VAPS OF VARIABLE COMPOSITION BASED ON SPECIFIC PROCESS CNDTNS.
THESE PROCESS RELEASES MAY PRDCE IRRIT OR ANY OF HEALTH EFTS LISTED ABOVE
WHEN EMISSIONS ARE PRESENT AT ELEVATED CONCS. USE W/APPROP LOCAL EXHAUST
VENT.
First Aid: EYES: IMMEDIATELY FLUSH EYES WITH LARGE AMOUNTS OF WATER. GET
IMMEDIATE MEDICAL ATTENTION. SKIN: IMMEDIATELY WASH SKIN WITH SOAP AND LARGE
AMOUNTS OF WATER. REMOVE CONTAMINATED CLOTHING. IF SIGNS/SYMP TOMS OCCUR,
CALL PHYSICIAN. WASH CONTAMINATED CLOTHING BEFORE REUSE AND DISPOSE OF
CONTAMINATED SHOES. INHAL: IF SIGNS/SYMPTOMS OCCUR, REMOVE PERSON TO FRESH
AIR. IF SIGNS/SYMPTOMS CONTINUE, CALL PHYS ICIAN. INGESTION: DO NOT INDUCE
VOMITING. DRINK TWO GLASSES OF WATER. CALL A PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF THIS MSDS FOR INFORMATION
REGARDING PHYSICAL AND HEALTH HAZARDS, RESPIRATORY PROTECTION, VENTILATION
AND PERSONAL PROTECTIVE EQUIPMENT. COVER WITH ABSORBENT MATERIAL. COLLEC T
SPILLED MATERIAL. PLACE IN A US DOT-APPROVED CONTAINER.
Waste Disposal Methods: CURE PRODUCT ACCORDING TO PRODUCT INSTRUCTIONS.
INCINERATE UNCURED WASTE IN AN INDUSTRIAL OR COMMERCIAL INCINERATOR. DISPOSE
OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL IN A SANITARY LANDFILL. SINCE
REGS VARY, CONSULT APPLICABLE FEDERAL, STATE & LOCAL AUTHORITIES BEFORE
DISPOSAL. US EPA HAZARDOUS WASTE NUMBER = NONE (NOT US EPA HAZARDOUS).
Handling And Storage Precautions: STORE AWAY FROM HEAT. KEEP OUT OF THE REACH
OF CHILDREN. KEEP CONTAINER TIGHTLY CLOSED.
Other Precautions: AVOID EYE CONTACT. AVOID SKIN CONTACT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point: >115.6C, 240.F
Autoignition Temp Text: N/D
Lower Limits: N/D
Upper Limits: N/D
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N) INCLUDING BUNKER COAT & PANTS, BANDS AROUND ARMS, WAIST
& LEGS, FACE MASK & PROTECTIVE COVERING FOR EXPOSED AREAS OF THE
HEAD.
Unusual Fire/Explosion Hazard: NO UNUSUAL FIRE OR EXPLOSION HAZARDS ARE
ANTICIPATED. NFPA HAZARD CODES: HEALTH: 2. FIRE: 1. REACTIVITY: 0. UNUSUAL
REACTION HAZARD: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID BREATHING OF VAPORS CREATED DURING CURE CYCLE.
AVOID BREATHING OF DUST CREATED BY CUTTING, SANDING OR GRINDING. SELECT ONE
OF THE FOLLOWING NIOSH APPROVED RESPIRATORS BASED ON AIRBORNE CONCENTRA TION
OF CONTAMINANTS AND IN ACCORDANCE WITH OSHA REGULATIONS: HALF-MASK DUST
RESPIRATOR.
Ventilation: PROVIDE APPROP LOCAL EXHAUST FOR GRINDING, CUTTING OR SANDING
CURED MATL. CURING OVENS MUST BE EXHAUSTED TO OUTDOORS OR TO SUITABLE
EMISSION CONTROL (SUPDAT)
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL ALCOHOL GLOVES.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH AND DELUGE SHOWER (FP N).
Work Hygienic Practices: DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH EXPOSED AREAS THOROUGHLY WITH SOAP AND WATER. DO NOT INGEST.
Supplemental Safety and Health: VENT: DEVICE. USE IN WELL-VENTD AREA. IF
EXHAUST VENT IS NOT ADEQUATE, USE APPROP NIOSH APPRVD RESP PROT. VOC: 0
GRAMS/LISTER; VOC LESS H*2O & EXEMPT SOLVENTS: 0 GRAMS/LITER. AVOID EYE
AND SKIN CONTA CT.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: N/D
Vapor Pres: N/D
Vapor Density: N/D
Spec Gravity: CA 1.11 (H*2O=1)
Viscosity: CA 5000 CPS
Evaporation Rate & Reference: N/D
Solubility in Water: NIL
Appearance and Odor: MEDIUM SYRUP, CLEAR; SLIGHT EPOXY ODOR.
Percent Volatiles by Volume: 0 (WT)
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: STRONG ACIDS, STRONG OXIDIZING AGENTS, AMINES. HEAT IS
GENERATED DURING CURE. DO NOT CURE A MASS LARGER THAN 50 GRAMS IN A CONFINED
SPACE TO PREVENT A PREMATURE (EXOTHERM) WITH PRODUCTION OF INTENSE HEAT AND
SMOKE.
Hazardous Decomposition Products: CARBON MONOXIDE AND CARBON DIOXIDE,
ALDEHYDES, KETONES, HYDROCARBONS, TOXIC VAPORS, GASES OR PARTICULATES.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
Ecological: ENVIRONMENTAL DATA: NOT DETERMINED.
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
Federal Regulatory Information: EPCRA HAZARD CLASS: FIRE HAZARD: NO; PRESSURE:
NO; REACTIVITY: NO; ACUTE: YES; CHRONIC: YES.
=======================================================
Other Information
=======================================================
Other Information: NOTE: THIS BASE TO BE USED WITH SCOTCH-WELD DP-105 PART A
CLEAR EPOXY ADHESIVE. ENVIRONMENTAL DATA SECTION CHANGED SINCE FEBRUARY 27,
1997.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCH-WELD DP-105 PART B CLEAR EPOXY ADHESIVE
Company: MINNESOTA MINING AND MFG CO, DBA 3M
Street: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 651-737-6501
Label Required IND: Y
Date Of Label Review: 04/27/1999
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: EYE CNTCT: MOD IRRIT: MAY INCL REDNESS,
SWELLING, PAIN, TEARING & HAZY VISION. VAPORS FROM HEATED MATL MAY CAUSE
EYE IRRIT. DUST MAY CAUSE EYE IRRIT. SKIN CNTCT: . MILD IRRIT: MAY INCL
REDNES S, SWELL & ITCHING. INHAL: IRRIT (UPPER RESP): MAY INCL SORENESS
OF NOSE & THROAT, COUGH & SNEEZING. VAPS OF HEATED MATL MAY CAUSE
RESP SYS IRRIT. DUST MAY CAUSE IRRIT OF RESP SYS. INGEST: MAY CAUSE IRRIT
OF GI TISSUES WITH POSSIBLE PAIN, VOMIT, ABDOMINAL TENDERNESS, NAUSEA, BLOOD
IN VOMITUS AND FECES. CHRONIC: SKIN CONTACT: ALLERGIC REACTION WHICH MAY
INCLUDE REDNESS, SWELLING, BLISTERING AND ITCHING.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
EPOXYLITE # 478-LV2
| |
|
PERFECT SOLUTION
| |
|
FERROIN, INDICATOR, LC14450
| 7732-18-5
5144-89-8
7782-63-0 |
|
GLOSS BLACK, 1979 730
| |
|
HELIUM, REFRIGERATED LIQUID, G-98
| 7440-59-7 |
|
CF STARTER K1, CF900
| |
|
PHOTOCONDUCTOR, CF900
| |
|
RESISORB-MERCURY VAPOR ABSORBENT, 4455
| |
|
CF TONER K1, CF900
| |
|
VVO NEOPHAX A REGULAR
| 68152-90-9
64742-52-5 |
|
SCOTCH-WELD DP-105 PART A CLEAR EPOXY ADHESIVE
| |
|
SCOTCH-WELD DP-105 PART B CLEAR EPOXY ADHESIVE
| 30583-72-3
25068-38-6
2530-83-8 |
|
FOSTER 32-57
| |
|
EP MULTIGUARD HARDENER, 7461B
| |
|
SIGMAGUARD EHB HARDENER, 7433B
| |
|
BRINKMANN'S SMOKER'S BLEND BRIQUETS
| |
|
TM83708 HYSIL NC
| 74-98-6
64741-66-8
8042-47-5
63148-62-9 |
|
5103135, HAMMENTE-SMOOTH BRIGHT YELLOW QUICK (SUPDAT)
| |
|
CLIPPER VARNISH CLEAR, 95
| 64742-95-6
8032-32-4
64742-88-7
25973-55-1 |
|
BULLETIN COLOR, 162 PURPLE
| |
|
ALL PRO DIAZINON 4E INSECTICIDE
| |
|
HAMMERITE - HAMMERED RED QUICK DRY METAL FINISH, 5000540
| |
|
BLACK URETHANE SUB PART A, 13910
| |
|
BLACK URETHANE SUB PART B, 13-911
| |
|
FLAKES/CHIPS
| 108-05-4
7727-43-7
14807-96-6
13845-36-8
13463-67-7
1333-86-4
7440-50-8 |
|
SAE/AMS 1424B-97 TYPE I
| |
|
CARBON DIOXIDE, GAS
| 124-38-9 |
|
ABRASIVE CUT-OFF WHEELS 811-043-010
| 1344-28-1
14808-60-7
65997-17-3 |
|
ABRASIVE CUT-OFF WHEELS 811-073-010
| 1344-28-1
14808-60-7
65997-17-3 |
|
PLSE2-3X, PLASMA STANDARD, 10,000 PPM OF (SUPDAT)
| |
|
0145040 SPEEDECK-CLEAR BASE
| |
|
VCI-238 AEROSOL
| |
|
PREVOX 2070100/WILLIAMS LITE-KING LIQUID 2257000
| 7664-38-2
7778-50-9
57-13-6
7732-18-5 |
|
PREPARATIONS CONTAINING SODIUM AZIDE
| 26628-22-8 |
|
ATLAS RELEASE AGENT
| 64-17-5
9002-89-5
7732-18-5 |
|
ABRASIVE CUT-OFF WHEELS 811-089-010
| 1344-28-1
14808-60-7
65997-17-3 |
|
C-SA ANTISEIZE, ANTI-SEIZE LUBRICANT, 39745
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
HUMISEAL 1B15H AEROSOL
| |
|
C-SA ANTISEIZE, ANTI-SEIZE LUBRICANT, 39624
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
C-SA ANTISEIZE, ANTI-SEIZE LUBRICANT, 39638
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
C-SA ANTISEIZE, ANTI-SEIZE LUBRICANT, 39641
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39643
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39647
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39651
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
ABRASIVE CUT-OFF WHEELS 811-095-010
| 1344-28-1
14808-60-7
65997-17-3 |
|
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39752
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
HP C3965A BLACK DEVELOPER
| |
|
C-5A ANTISEIZE, ANTI-SEIZE LUBRICANT, 39756
| 7782-42-5
64742-52-5
7440-50-8
64742-18-3
14808-60-7
64755-01-7
64742-54-7 |
|
CEE BEE A-882
| |
|
ABRASIVE CUT-OFF WHEELS 585-269
| 1344-28-1
14808-60-7
65997-17-3 |
|
|