LUBRICATION ENGINEERS, INC. -- 8430 MONOLEC GFS ENGINE OIL
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLCGT
MSDS NAME: 8430 MONOLEC GFS ENGINE OIL
Responsible Party
Name: LUBRICATION ENGINEERS, INC.
Address: 3851 AIRPORT FREEWAY
City: FORT WORTH TX 76111-0128
Info Phone: (817) 834-6321
Emergency Phone Number: 817-834-6321
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: LUBRICATION ENGINEERS, INC.
Address: 3851 AIRPORT FREEWAY
City: FORT WORTH TX 76111-0128
Phone: (817) 834-6321
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: THRESHOLD LIMIT VALUE: NOT ESTABLISHED. OIL MIST = 5
MG/M3. ALTHOUGH THERE ARE NO CONSISTENT PRIMARY ROUTES OF ENTRY, THE PRODUCT
MAY CAUSE MILD DERMATITIS UPON PROLONGED CONTACT AND IS EXPECTED TO BE AN
EYE AND LUNG IRRITANT.
Explanation Of Carcinogenicity: NO COMPONENTS ARE LISTED ON OSHA, I.A.R.C., OR
N.T.P. LISTS FOR CARCINOGENS.
Signs And Symptions Of Overexposure: THE PRODUCT MAY CAUSE MILD DERMATITIS UPON
PROLONGED CONTACT AND IS EXPECTED TO BE AN EYE AND LUNG IRRITANT.
Medical Cond Aggravated By Exposure: ANY EXISTING SKIN, EYE, OR LUNG IRRITATION
MAY BE AGGRAVATED BY DIRECT CONTACT.
First Aid: EYE CONTACT: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES (FP
N). FLUSH IMMEDIATELY WITH WATER UNTIL IRRITATION SUBSIDES. SKIN CONTACT:
WASH AFFECTED SKIN AREA WITH MILD SOAP AND WATER. INGESTI ON: DO NOT INDUCE
VOMITING. CONTACT A PHYSICIAN. INHALATION: REMOVE TO FRESH AIR. IF NOT
BREATHING, GIVE ARTIFICIAL RESPIRATION. CONTACT A PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL SOURCES OF IGNITION. TREAT AS A PETROLEUM
OIL SPILL.
Neutralizing Agent: N/P.
Waste Disposal Methods: INCINERATE WHERE PERMITTED UNDER FEDERAL, STATE AND
LOCAL LAWS. USED PETROLEUM PRODUCTS MAY BE RECYCLED THROUGH RE-REFINING
PROCESSES.
Handling And Storage Precautions: CLOSE CONTAINERS WHEN NOT IN USE. KEEP AWAY
FROM HEAT, SPARKS, OPEN FLAMES, AND STRONG OXIDANTS.
Other Precautions: AVOID EYE CONTACT AND PROLONGED SKIN CONTACT. AVOID
BREATHING OIL MISTS. WASH THOROUGHLY AFTER HANDLING.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point: =218.3C, 425.F
Lower Limits: UNKNOWN
Upper Limits: UNKNOWN
Extinguishing Media: FOAM, DRY CHEMICAL, WATER FOG, OR CARBON DIOXIDE.
Fire Fighting Procedures: WEAR NIOSH-APPROVED SELF-CONTAINED BREATHING
APPARATUS AND FULL PROTECTIVE EQUIPMENT (FP N). DO NOT DIRECT A SOLID STREAM
OF WATER INTO FIRE. TREAT AS A PETROLEUM OIL FIRE. RESPIRATORY PROTECTION
REQU IRED FOR FIRE FIGHTING PERSONNEL.
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WEAR NIOSH-APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN (FP N). USUALLY NOT NEEDED IN OPEN, UNCONFINED AREAS.
Ventilation: USUALLY NOT NEEDED IN OPEN, UNCONFINED AREAS.
Protective Gloves: PROTECTIVE NEOPRENE OR PLASTIC GLOVES MAY BE DESIRED.
Eye Protection: ANSI APPROVED CHEM WORKER GOGGLES (FP N). SUFFICIENT TO AVOID
DIRECT CONTACT.
Other Protective Equipment: EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N). USUALLY NOT NEEDED.
Work Hygienic Practices: WASH THOROUGHLY AFTER HANDLING.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: >260.C, 500.F
Vapor Pres: <5 MMHG @ 60F
Spec Gravity: 0.88 (H*2O=1)
PH: 6-8
Viscosity: (SUPP SAFETY)
Solubility in Water: NEGLIGIBLE
Appearance and Odor: RED LUBRICANT. LUBE OIL ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: CONTACT WITH NUCLEAR RADIATION AND STRONG
OXIDIZING MATERIALS.
Materials To Avoid: STRONG OXIDIZING MATERIALS.
Hazardous Decomposition Products: DENSE SMOKE, OXIDES OF C, S, MG, N, P, ZN,
AND B; HYDROGEN SULFIDE.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
Toxicological Information: THIS MATERIAL IS AN AUTOMOTIVE/INDUSTRIAL LUBRICANT
WITH A LOW ORDER OF TOXICITY AND IRRITANCY. OIL MIST (MINERAL): ORAL LD50:
UNKNOWN. DERMAL LD50: UNKNOWN. ZINC COMPOUNDS: ORAL LD50: UNKNOWN. DERMAL
LD50: UNKNOWN.
=======================================================
Ecological Information
=======================================================
Ecological: THE PRODUCT IS FORMULATED WITH INGREDIENTS THAT ARE NOT DESIGNATED
AS HARMFUL TO THE OZONE.
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: THIS PRODUCT DOES NOT CONTAIN ANY CHEMICAL
SUBSTANCE ON THE SARA EXTREMELY HAZARDOUS SUBSTANCES LIST. IF THIS PRODUCT
CONTAINS ANY CHEMICALS THAT ARE SUBJECT TO THE REPORTING REQUIREMENTS OF
SECTION 3 13 OF TITLE III OF THE SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT
OF 1988 AND 40 CFR PART 372, THEY WILL BE LISTED IN THE INGREDIENT SECTION.
Federal Regulatory Information: TSCA: THIS MATERIAL IS IN COMPLIANCE WITH THE
TOXIC SUBSTANCES CONTROL ACT (15 USC 2601-2829) AND ALL COMPONENTS OF THIS
PRODUCT APPEAR ON THE TOXIC SUBSTANCE CONTROL ACT (TSCA) INVENTORY LIST.
CLEAN AIR ACT: NO OZONE DEPLETING CHEMICALS LISTED IN TITLE VI STRATOSPHERIC
OZONE PROTECTION, SECTION 502 OF THE CLEAN AIR ACT ARE PRESENT OR USED IN THE
MANUFACTURING PROCESS OF THIS PRODUCT.
=======================================================
Other Information
=======================================================
Other Information: NFPA: HEALTH=2, FLAMMABILITY=1, REACTIVITY=1. : HEALTH=1,
FLAMMABILITY=1, REACTIVITY=1. THIS PRODUCT IS A MIXTURE. THE SPECIFIC
CHEMICAL IDENTITY OF HAZARDOUS INGREDIENTS AND NON-HAZARDOUS INGREDI ENTS,
THEIR CAS NUMBERS AND THEIR EXACT PERCENT OF COMPOSITION ARE PROPRIETARY TO
LUBRICATION ENGINEERS INC AND ARE BEING WITHHELD AS TRADE SECRETS. THE
LISTING OF INGREDIENTS DISCLOSES THE PROPERTIES , APPROXIMATE CONCENTRATION
AND KNOWN TOXICOLOGICAL EFFECTS OF THE HAZARDOUS INGREDIENTS.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 8430 MONOLEC GFS ENGINE OIL
Assigned IND: Y
Company: LUBRICATION ENGINEERS, INC.
Street: 3851 AIRPORT FREEWAY
City: FORT WORTH TX
Zipcode: 76111-0128
Health Emergency Phone: 817-834-6321
Label Required IND: Y
Date Of Label Review: 04/25/2001
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: THRESHOLD LIMIT VALUE: NOT ESTABLISHED. OIL MIST = 5
MG/M3. ACUTE: EYE: EXPECTED TO BE AN IRRITANT. INHALATION: EXPECTED TO BE AN
IRRITANT. CHRONIC: SKIN: MAY CAUSE MILD DERMATITIS UPON PROLONGED CON TACT.
TARGET ORGANS: EYES, LUNGS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|