Search   
MSDS  
:
 PAX-PURGE
CAS  
:
 
NAME  
:
 *** proprietary  ***
Catalog of Chemical Suppliers, Buyers, Custom Synthesis Companies And Equipment Manufacturers
[ PAX-PURGE ]
Suppliers:   
Not Available
Buyers:  
Not Available
EXXON CHEMICAL COMPANY         -- PAX-PURGE                                    
=======================================================
Material Safety Data Sheet 
=======================================================
MSDS Num: CLHQP
MSDS NAME: PAX-PURGE
Responsible Party
Name: EXXON CHEMICAL COMPANY
Address: BATON ROUGE POLYOLEFINS PLANT
Box: 53006
City: BATON ROUGE LA 70892-3006
Info Phone: (504) 775-4330
Emergency Phone Number: (504) 775-4330
Resp. Party Other MSDS No.: 10
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary 
=======================================================
Name: EXXON CHEMICAL COMPANY
Address: BATON ROUGE POLYOLEFINS PLANT
Box: 53006
City: BATON ROUGE LA 70892-3006
Phone: (504) 775-4330
=======================================================
Ingredients 
=======================================================
Name: *** PROPRIETARY  ***
-----------------------------
=======================================================
Health Hazards Data 
=======================================================
Route Of Entry Inds - Inhalation: NO
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EMERGENCY OVERVIEW: PRODUCT IS TRANSLUCENT PELLETS. NO
  SIGNIFICANT HEALTH HAZARD FROM EXPOSURE TO PRODUCT. POTENTIAL HEALTH HAZARDS:
  SKIN: NOT AN IRRITANT. EYES: NON-EYE IRRITANT. PARTICULATES MAY CAU SE
  MECHANICAL IRRITATION. INHALATION: INHALATION OF EXCESSIVE AMOUNTS OF DUST
  SHOULD BE AVOIDED. INGESTION: NON-TOXIC. DELAYED EFFECTS (CHRONIC): NONE
  KNOWN.
Explanation Of Carcinogenicity: INGREDIENTS FOUND ON ONE OF THE OSHA DESIGNATED
  CARCINOGEN LISTS ARE LISTED BELOW: NO INGREDIENTS LISTED IN THIS SECTION.
First Aid: SKIN: WASH WITH WATER AND SOAP. EYE: WASH WITH WATER FOR 15 MINUTES.
  IF IRRITATION PERSISTS, CONSULT PHYSICIAN. INHALATION: FOR INHALATION OF
  POWDER, REMOVE TO FRESH AIR. INGESTION: NOT EXPECTED TO OC CUR. CONTACT A
  PHYSICIAN IMMEDIATELY (FP N). ADVICE TO PHYSICIAN: NO SPECIFIC ADVICE. TREAT
  ACCORDING TO SYMPTOMS PRESENT.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SWEEP UP WITH A MINIMUM OF DUSTING. COLLECT IN
  CONTAINER, E.G., FIBERBOARD DRUM. DISPOSE OF AS A NON-HAZARDOUS ORGANIC SOLID
  WASTE.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL, STATE AND
  LOCAL REGULATIONS (FP N).  RCRA: IF DISCARDED, THIS PRODUCT IS NOT CONSIDERED
  A RCRA HAZARDOUS WASTE.   OTHER DISPOSAL CONSIDERATIONS: DISCARD AS N
  ON-HAZARDOUS ORGANIC SOLID WASTE.
Handling And Storage Precautions: NORMAL HANDLING: ALWAYS WEAR RECOMMENDED
  PERSONAL PROTECTIVE EQUIPMENT. HIGH LEVELS OF STATIC ELECTRICITY CAN DEVELOP
  WHEN HANDLING HDPE. CARE SHOULD BE EXERCISED WHEN HANDLING THIS PRODUCT.
  REFER TO  THE NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) BULLETIN 654
  "STANDARDS FOR THE (TOXICOLOGICAL INFO)
=======================================================
Fire and Explosion Hazard Information 
=======================================================
Flash Point: =340.C, 644.F
Flash Point Text: ASTM D 1929
Lower Limits: NOT APPLIC
Upper Limits: NOT APPLIC
Extinguishing Media: NO SPECIAL AGENTS RECOMMENDED. USE MEDIA SUITABLE FOR
  SURROUNDING FIRE (FP N).    OSHA FLAMMABILITY CLASS: COMBUSTIBLE SOLID.     
  FLAME PROPAGATION RATE (SOLIDS): UNKNOWN.
Fire Fighting Procedures: SELF-CONTAINED BREATHING APPARATUS (NIOSH APPROVED;
  AND FULL PROTECTIVE EQUIPMENT - FP N) FOR FIRE FIGHTING PERSONNEL
  RECOMMENDED.
Unusual Fire/Explosion Hazard: REFER TO NATIONAL FIRE PROTECTION ASSOCIATION
  (NFPA) BULLETIN 654 "STANDARDS FOR PREVENTION OF FIRE AND DUST EXPLOSIONS IN
  CHEMICAL, DYE, PHARMACEUTICAL AND PLASTICS INDUSTRIES," 1988 EDITION, AND NFP
  A 89 "STANDARD ON EXPLOSION PREVENTION SYSTEMS," 1992 EDITION, FOR SAFE
  HANDLING PRACTICES.
=======================================================
Control Measures 
=======================================================
Respiratory Protection: ANY DUST FROM THIS PRODUCT IS CONSIDERED TO BE A
  NUISANCE DUST. IF THERE IS A POTENTIAL FOR GENERATING DUST LEVELS IN EXCESS
  OF 10 MG/CUBIC METER, AN APPROPRIATE NIOSH-APPROVED RESPIRATOR SHOULD BE US
  ED.
Ventilation: FOR STORAGE AND ORDINARY HANDLING, GENERAL VENTILATION IS
  ADEQUATE.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: (ANSI APPROVED - FP N) SAFETY GLASSES RECOMMENDED.
Other Protective Equipment: EYEWASH MEETING ANSI DESIGN CRITERIA (FP N). SKIN
  PROTECTION: NO SPECIAL EQUIPMENT RECOMMENDED.  ADDITIONAL RECOMMENDATIONS:
  NOT GENERALLY REQUIRED.
Supplemental Safety and Health: ADDITIONAL RECOMMENDATIONS: NOT GENERALLY
  REQUIRED.	EXPOSURE GUIDELINES: NO INGREDIENTS LISTED IN THIS SECTION.
=======================================================
Physical/Chemical Properties 
=======================================================
Melt/Freeze Pt: =120.C, 248.F
M.P/F.P Text: 248-275 F MELT POINT
Vapor Pres: NON-VOLATILE
Vapor Density: NON-VOLATI
Spec Gravity: 0.930-0.950 (H2O=1)
Evaporation Rate & Reference: NON-VOLATILE
Solubility in Water: INSOLUBLE
Appearance and Odor: WHITE OPAQUE PELLETS, SOLID; MILD WAXY ODOR.
Percent Volatiles by Volume: NON-VOLATILE
=======================================================
Reactivity Data 
=======================================================
Stability Indicator: YES ITY CONDITION TO AVOID)
Stability Condition To Avoid: N/P.	   MATERIALS TO AVOID (CONT): SOLVENT
  CONTACT WITH THE PRODUCT IS CONSIDERED.
Materials To Avoid: ATTACKED BY OXIDIZING AGENTS SUCH AS NITRIC AND PERCHLORIC
  ACID AND FREE HALOGENS. ALSO SOFTENED BY HYDROCARBONS SUCH AS BENZENE,
  PETROLEUM ETHER AND CHLORINATED HYDROCARBONS. PAXON POLYMER CO. SHOULD BE
  CONSULTED IF (STABI
Hazardous Decomposition Products: COMBUSTION PRODUCTS INCLUDE CO AND CO2.
  IGNITABLE GASES CAN BE GENERATED AT TEMPERATURES OVER 340C.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information 
=======================================================
Toxicological Information: IMMEDIATE (ACUTE) EFFECTS: NOT DETERMINED. DELAYED
  (SUBCHRONIC AND CHRONIC) EFFECTS: NOT DETERMINED. OTHER DATA: NO OTHER DATA
  DEVELOPED.	 HANDLING AND STORAGE PRECAUTIONS (CONT): PREVENTION OF FIR E
  AND DUST EXPLOSIONS IN CHEMICAL, DYE, PHARMACEUTICAL AND PLASTICS
  INDUSTRIES," 1988 EDITION, AND NFPA STANDARD 68 "STANDARD ON EXPLOSION
  PREVENTION SYSTEMS," 1992 EDITION, FOR SAFE HANDLING PROCEDUR ES. STANDARD
  OPERATION PROCEDURE FOR UNLOADING BULK VEHICLES SHOULD INCLUDE THE FOLLOWING:
  (A) METAL SAMPLING DEVICES, SUCH AS GRAIN THIEF SHOULD NOT BE USED DUE TO
  RISK OF STATIC SHOCK AND RESULTING  IGNITION. (B) HOPPER (ECOLOGICAL INFO)
=======================================================
Ecological Information 
=======================================================
Ecological: NO DATA HAVE BEEN DEVELOPED ON THIS SUBJECT. PRODUCT IS NOT SOLUBLE
  IN WATER; NOT CONSIDERED BIODEGRADABLE.	 TOXICOLOGICAL INFO (CONT):
  SAMPLES, IF TAKEN FROM THE TOP, SHOULD REQUIRE TOP HATCHES  TO BE OPENED AND
  PLASTIC INSERT COVERS REMOVED FOR A MINIMUM OF ONE HOUR FOR PROPER
  VENTILATIONPRIOR TO SAMPLING. [C] TO PREVENT HOPPER COLLAPSE, TOP HATCHES
  SHOULD BE OPENED IF REQUIRED BY THE TYPE  OF UNLOADING SYSTEM. (D) JOINTS IN
  TRANSFER SYSTEM SHOULD BE SEALED. DUST FILTER ON BLOWERS SHOULD BE CHECKED
  FREQUENTLY FOR PLUGGAGE. TRANSFER LINES SHOULD BE GROUNDED. STORAGE
  RECOMMENDATIONS: BULK  STORAGE VESSELS SHOULD BE WELL GROUNDED.
=======================================================
MSDS Transport Information 
=======================================================
Transport Information: US DOT HAZARD CLASS: NOT REGULATED.   US DOT ID NUMBER:
  NOT REGULATED.
=======================================================
Regulatory Information 
=======================================================
Sara Title III Information: SARA TITLE III/
CERCLA: RQS & TPQS: REPORTABLE QUANTITIES (RQS) AND/OR "THRESHOLD PLANNING
  QUANTITIES" (TPQS) EXIST FOR THE FOLLOWING INGREDIENTS: NO INGREDIENTS LISTED
  IN THIS SECTION. SECTION 311 HAZ ARD CLASS: NONE. SARA 313 TOXIC CHEMICALS:
  NONE. ADDITIONAL REGULATORY INFORMATION: THIS PRODUCT IS NOT REPORTABLE UNDER
  SARA TITLE III SECTIONS 311, 312 OR 313.
Federal Regulatory Information: TOXIC SUBSTANCES CONTROL ACT (TSCA): TSCA
  INVENTORY STATUS: THIS PRODUCT IS LISTED ON THE TSCA CHEMICAL INVENTORY.
  OTHER TSCA ISSUES: NONE.   W CLASSIFICATION (CANADA): NOT A CONTROLLED
  PRODUCT.    FOREIGN INVENTORY STATUS: CANADIAN DSL (DOMESTIC SUBSTANCES
  LIST).
State Regulatory Information: STATE RIGHT TO KNOW: THERE ARE NO INGREDIENTS
  LISTED FOR STATE RIGHT TO KNOW PURPOSES.
=======================================================
Other Information 
=======================================================
Other Information: OTHER/GENERIC NAMES: BLEND OF HDPE AND STABILIZING
  ADDITIVES. PRODUCT USE: PURGE COMPOUND IS FOR CLEANING PLASTIC PROCESSING
  MACHINES. PREVIOUS ISSUE DATE: SEPTEMBER, 1995. CHANGES TO MSDS FROM PREVIO
  US ISSUE DATE ARE DUE TO THE FOLLOWING: ROUTINE REVIEW AND REISSUE. OTHER
  INFORMATION: NONE. (PHYSICAL/CHEMICAL, CONT'D) MOLECULAR WEIGHT: >20,000. 
  CHEMICAL FORMULA: (-CH2-CH2-)X.  INGREDIENTS FOUND  ON ONE OF THE OSHA
  DESIGNATED CARCINOGEN LISTS ARE LISTED BELOW: NO INGREDIENTS LISTED IN THIS
  SECTION.
=======================================================
HAZCOM Label 
=======================================================
MSDS NAME: PAX-PURGE
Assigned IND: Y
Company: EXXON CHEMICAL COMPANY
Street: BATON ROUGE POLYOLEFINS PLANT
PO Box: 53006
City: BATON ROUGE LA
Zipcode: 70892-3006
Health Emergency Phone: (504) 775-4330
Label Required IND: Y
Date Of Label Review: 07/10/2001
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: None
Contact Hazard: None
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: EMERGENCY OVERVIEW: PRODUCT IS TRANSLUCENT PELLETS. NO
  SIGNIFICANT HEALTH HAZARD FROM EXPOSURE TO PRODUCT. POTENTIAL HEALTH HAZARDS:
  SKIN: NOT AN IRRITANT. EYES: NON-EYE IRRITANT. PARTICULATES MAY CAU SE
  MECHANICAL IRRITATION. INHALATION: INHALATION OF EXC
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
  information is formulated for use by elements of the Department of Defense.
  The United States of America in no manner whatsoever expressly or implied
  warrants, states, or intends said information to have any application, use or
  viability by or to any person or persons outside the Department of Defense
  nor any person or persons contracting with any instrumentality of the United
  States of America and disclaims all liability for such use. Any person
  utilizing this instruction who is not a military or civilian employee of the
  United States of America should seek competent professional advice to verify
  and assume responsibility for the suitability of this information to their
  particular situation regardless of similarity to a corresponding Department
  of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
7460, SALINITY INDICATOR REAGENT A (SEE SUPPL) 7789-00-6
7761-88-8
7732-18-5
4253, CARBON DIOXIDE REAGENT B (SEE SUPPL 1310-73-2
7732-18-5
2246, PHENOLPHTHALEIN INDICATOR, 1% OR CHLORIDE C (SEE SUPPL 64-17-5
67-56-1
77-09-8
7732-18-5
2218, WIDE RANGE INDICATOR (SEE SUPPL) 64-17-5
67-56-1
51-28-5
1310-73-2
77-09-8
76-59-5
76-61-9
493-52-7
7732-18-5
7461, SALINITY TITRATION REAGENT (SEE SUPPL) 7761-88-8
7732-18-5
4493, ALKALINITY TITRATION REAGENT B (SEE SUPPL) 7664-93-9
7732-18-5
3978, AMMONIA #1 (SEE SUPPL)
2311, BROMCRESOL GREEN-METHYL RED INDICATOR (SEE SUPPL) 64-17-5
67-56-1
76-60-8
493-52-7
10102-17-7
7732-18-5
3979, AMMONIA #2 (SEE SUPPL)
V-6278, MIXED ACID REAGENT (SEE SUPPL) 64-19-7
7758-99-8
12125-02-9
7558-79-4
7647-14-5
77-92-9
7732-18-5
NON-MELT GREASE, 7062
V-6281, COLOR DEVELOPING REAGENT (SEE SUPPL) 10034-96-5
12125-02-9
63-74-1
1465-25-4
68-04-2
V-6279, NITRATE REDUCING POWDER (SEE SUPPL) 10034-96-5
7440-43-9
12125-02-9
63-74-1
68-04-2
1465-25-4
BLACK-OUT BLACK, 07209
AEROLOX 25567 (SEE SUPPL)
OZZY JUICE (SW-3 TRUCK GRADE DEGREASING SOLUTION)
NITROUS OXIDE, REFRIGERATED LIQUID, MSDS CODE G-105 10024-97-2
LP-3
4-HYDROXYMEFENOREX HCL
OXYGEN LIQUID, OXYGEN, REFRIGERATED LIQUID 7782-44-7
PAX-PURGE
IODATE-IODIDE 0.3998 +/- 0.0020 N KIO3 7681-11-0
1310-73-2
7732-18-5
7758-05-6
PHENOL RED INDICATOR 57-55-6
7732-18-5
BAG, STERILE WITH THIOSULFATE (NASCO WHIRL-PAK THIOBAG)
PH ELECTRODE STORAGE REAGENT 7447-40-7
7778-77-0
7558-79-4
BUFFER POWDER PILLOWS PH 4.01 +/- 0.02 @25C 23647-14-5
877-24-7
MOLYBDOVANADATE REAGENT 12027-67-7
7803-55-6
7732-18-5
7664-93-9
BUFFER POWDER PILLOWS PH 10.01 +/- 0.02 @25C 497-19-8
144-55-8
BUFFER POWDER PILLOWS PH 7.00 +/- 0.02 @ 25C 7778-77-0
7558-79-4
ELECTRON TUBE VDS-1141
TB-50, SOLDER
IMP-MMC-80W90
F-500, FIRE FIGHTING AGENT
AC4368
POLYURETHANE PROTECTIVE TAPE ADHESION PROMOTOR 86A (SEE SUPP 67-63-0
68989-76-4
71-23-8
5601 BLACK B5601L
MICROSCAN N,N-DIMETHYLALPHANAPTHLAMINE, B1010-45A B1015-45 86-56-6
64-19-7
SKYDROL 500B-4 FIRE RESISTANT HYDRAULIC FLUID
MICROSCAN (R*) 10% FERRIC CHLORIDE, B1010-48A / B1015-48 7705-08-0
7732-18-5
DEGREASER SOLVENT
VIKING MAKE-UP SOLUTION 7732-18-5
100-51-6
25638-17-9
10196-04-0
S2050 MULLERS COLLOIDIAL IRON OXIDE STOCK SOLUTION
FIBERFRAX ROPES 142844-00-6
65997-17-3
61788-77-0
PEEL AWAY NEUTRALIZER 64-19-7
7732-18-5
0819 D E NEUTRALIZING BROTH 7772-98-7
7681-57-4
367-51-1
BREAK-FREE PCL, NON-CHLORINATED LIQUID
CHEVRON RPM HEAVY DUTY MOTOR OIL (SEE SUPPL)
2592, HEMA-CHEK SLIDE TEST (SEE SUPPL)
PERMATEX FORM-A-GASKET NO 2 SEALENT, 2C 1332-58-7
8050-09-7
68439-93-0
67-63-0
8002-43-5
MOLD RELEASE PLASTILEASE 512-8 87-95 67-63-0
78-93-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com