POLYSPEC CORPORATION -- POLYSPEC FLEX FR - PART A (A760) / (A765) CLE
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CLLBK
MSDS NAME: POLYSPEC FLEX FR - PART A (A760) / (A765) CLEAR OR PIGMENTED
Responsible Party
Name: POLYSPEC CORPORATION
Address: 6614 GANT RD
City: HOUSTON TX 77066
Info Phone: 281-397-0033
Emergency Phone Number: (800)424-9300;OUTSIDE US:2024837616
Resp. Party Other MSDS No.: 760-765A.FLX
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: POLYSPEC MARINE PRODUCTS CORPORATION
Address: 6614 GANT RD
City: HOUSTON TX 77066
Phone: 281-397-0033
=======================================================
Ingredients
=======================================================
Cas: 25085-99-8
Name: EPOXY RESIN
< Wt: 70.
OSHA PEL: NONE
ACGIH TLV: NONE
-----------------------------
Cas: 56803-37-3
Name: P-T-BUTYLPHENYL DIPHENYL PHOSPHATE
< Wt: 10.
OSHA PEL: NONE
ACGIH TLV: NONE
------------------------------
Cas: 68609-97-2
Name: ALKYL GLYCIDYL ETHER
< Wt: 15.
OSHA PEL: NONE
ACGIH TLV: NONE
-----------------------------
Cas: 15625-89-5
RTECS #: AT4810000
Name: TRIMETHYLOLPROPANE TRIACRYLATE
< Wt: 15.
OSHA PEL: NONE
ACGIH TLV: NONE
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: N/P.
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: SKIN CONTACT: SEVERE SKIN IRRITANT. MAY CAUSE SKIN
SENSITIZATION ON REPEATED EXPOSURE. EYES: MILD EYE IRRITANT. INGESTION: VERY
LOW ORDER OF TOXICITY. INHALATION: NOT A LIKELY ROUTE OF EXPOSURE. CHRON IC:
LONG TERM EXPOSURE TO SKIN MAY RESULT IN SENSITIZATION. MAY CAUSE HEPATIC
ENLARGEMENT AND OTHER LIVER AND KIDNEY DISORDERS.
First Aid: INHALATION: UNLIKELY ROUTE OF EXPOSURE. IF INHALED, REMOVE VICTIM TO
FRESH AIR. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. OBTAIN MEDICAL
ATTENTION. SKIN: WASH WITH SOAP. FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
INGESTION: NO ADVERSE EFFECTS ARE EXPECTED. CONSULT A PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SMALL SPILL - SOAK UP WITH ABSORBENT MATERIAL. LARGE
SPILL - DIKE AREA AROUND SPILL WITH SAND OR EARTH. PUMP INTO RECOVERY DRUMS.
SOAK UP REMAINING LIQUID WITH SAND, EARTH, ETC. RESIDUAL RESIN MAY BE
REMOVED USING STEAM OR HOT SOAPY WATER.
Waste Disposal Methods: HANDLE DISPOSAL OF WASTE MATERIAL IN MANNER WHICH
COMPLIES WITH LOCAL, STATE, PROVINCE AND FEDERAL REGULATIONS. DO NOT DUMP
INTO ANY SEWERS, OR THE GROUND OR INTO ANY BODY OF WATER.
Handling And Storage Precautions: AVOID PROLONGED SKIN CONTACT. STORE IN A
COOL, DRY VENTILATED AREA. KEEP AWAY FROM HEAT, OXIDIZERS OR OPEN FLAMES.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: >100.C, 212.F
Autoignition Temp Text: NO DAT
Lower Limits: NOT DETERMIN
Upper Limits: NOT DETERMIN
Extinguishing Media: CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL FOAM
Fire Fighting Procedures: WEAR FULL BUNKER GEAR. KEEP CONTAINERS COOL WITH
WATER.
Unusual Fire/Explosion Hazard: INCOMPLETE PYROLYSIS OR COMBUSTION PRODUCTS
INCLUDE - PHENOLICS, CARBON DIOXIDE, CARBON MONOXIDE AND WATER. IGNITION
GIVES RISE TO A CLASS B FIRE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE REQUIRED UNDER NORMAL WORK CONDITIONS. A NIOSH
APPROVED RESPIRATOR APPROPRIATE FOR THE EXPOSURE OF CONCERN (FP N)
Ventilation: MECHANICAL EXHAUST.
Protective Gloves: IMPERVIOUS GLOVES (FP N)
Eye Protection: ANSI APPROVED CHEMICAL SAFETY GOGGLES AND FULL FACESHIELD (FP
N).
Other Protective Equipment: LONG SLEEVED SHIRT, SLICKER SUIT, RUBBER BOOTS.
EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN CRITERIA (FP N).
Supplemental Safety and Health: PRODUCT NAME: POLYSPEC FLEX FR-PART A-CLEAR OR
PIGMENTED. CHEMICAL FAMILY: EPOXY RESIN.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: DECOMPOSES
M.P/F.P Text: NO DATA AVAILABLE
Vapor Pres: EXTREMELY LOW @ 68 DEG F
Vapor Density: >1(AIR=1)
Spec Gravity: >1 @ 68 DEG F (H2O=1)
Solubility in Water: INSOLUBLE
Appearance and Odor: AMBER LIQUID (OR SPECIFIED PIGMENT), AROMATIC ODOR
Percent Volatiles by Volume: < 0.1%
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXCESSIVE HEATING OVER LONG PERIODS OF TIME MAY
DEGRADE THIS PRODUCT
Materials To Avoid: OXIDIZERS, AMINES
Hazardous Decomposition Products: INCOMPLETE PYROLYSIS OR COMBUSTION PRODUCTS
MAY INCLUDE - PHENOLICS, CARBON DIOXIDE, CARBON MONOXIDE AND WATER
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: MASSES OF MORE THAN 1/4 KG PLUS AN
ALIPHATIC AMINE WILL IRREVERSIBLY POLYMERIZE WITH CONSIDERABLE HEAT BUILD UP.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
Transport Information: PROPER SHIPPING NAME: POLYMER SOLUTION - NON HAZARDOUS.
HAZARD CLASS: NOT REGULATED. UN / NA NUMBER: NONE.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: CERCLA / EPCRA: SECTION 302 EXTREMELY HAZARDOUS
SUBSTANCES: NONE. SECTION 311 / 312 HAZARD CLASS: NONE. SECTION 313 TOXIC
CHEMICALS: THIS PRODUCT CONTAINS THE FOLLOIWNG SUBSTANCES SUBJECT OT THE REP
ORTING REQUIREMENTS OF SECTION 313 OF TITLE III OF THE SUPERFUND AMENDMENTS
AND REAUTHORIZATION ACT OF 1986 AND 40 CFR PART 372: NONE.
Federal Regulatory Information: TSCA STATUS: ALL COMPONENTS ARE LISTED.
State Regulatory Information: CALIFORNIA - CONTAINS EPICHLOROHYDRIN AT NO MORE
THAN 0.001%.
=======================================================
Other Information
=======================================================
Other Information: DATE PREPARED: AUGUST 12, 1997. DATE REVISED: OCTOBER 25,
1999; NOVEMBER 13, 1999. HAZARD RATING: FIRE AND EXPLOSION = 3,
REACTIVITY = 2, HEALTH = 2.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: POLYSPEC FLEX FR - PART A (A760) / (A765) CLEAR OR PIGMENTED
Company: POLYSPEC MARINE PRODUCTS CORPORATION
Street: 6614 GANT RD
City: HOUSTON TX
Zipcode: 77066
Health Emergency Phone: (800)424-9300;OUTSIDE US:2024837616
Label Required IND: Y
Date Of Label Review: 09/06/2001
Status Code: A
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: SKIN CONTACT: SEVERE SKIN IRRITANT. MAY CAUSE
SKIN SENSITIZATION ON REPEATED EXPOSURE. EYES: MILD EYE IRRITANT. INGESTION:
VERY LOW ORDER OF TOXICITY. INHALATION: NOT A LIKELY ROUTE OF EXPOSURE .
CHRONIC: LONG TERM EXPOSURE TO SKIN MAY RESULT IN SENSITIZATION. MAY CAUSE
HEPATIC ENLARGEMENT AND OTHER LIVER AND KIDNEY DISORDERS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.