| MSDS | : | JET LUBRICANT TM, 1841618416 | | CAS | : | 64742-01-4
64742-62-7
64742-57-0 | | NAME | : | decomp prods: of sodium.
first aid proc:if more than a half-cup full of this matl is swallowed,
ing 8:obtain med attn. high-press injections in underlying tiss: immed
ing 9: debridement, & saline irrigation. inadeq treatment may rslt in
spill proc:poss; in natural environ, cleanup on advice from ecologists.
ing 11:comply w/all applic laws. spills may need to be reported to
ing 12: matl & any soil or water which it has contacted may be
waste disp:treatment, transporters, & disp sites in compliance with
ing 14: potential treatment disposal methods include incineration and
hndlg/stor prec: skin, and/or underlying tissue.
other prec: medical attention if injected accidentally.
hygiene pract: gasoline, solvents, kerosene, or harsh abrasive skin
ing 18:take a shower after work if general contact occurs. remove
ing 19: launder or discard contaminated leather gloves and shoes.
residual oils, solvent refined, (solvent-refined residual oil
solvent-dewaxed residual oil (petroleum)
solvent refined hydrotreated residual oil; (hydrotreated residual oil
sodium salt soap(s) of plant or animal derived fatty oils.
explo haz:or be explosive in confined spaces if exposed to an ignition
ing 5: at temperatures below the normal flash point. keep away from
|
| |
|
|
LYONDELL PETROCHEMICAL CO -- JET LUBRICANT TM, 1841618416
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSYVB
MSDS NAME: JET LUBRICANT TM, 1841618416
Responsible Party
Name: LYONDELL PETROCHEMICAL CO
Address: 12000 LAWNDALE AVE
Box: 2451
City: HOUSTON TX 77252-2451
Info Phone: 800-525-4692
Emergency Phone Number: 800-245-4532;800-424-9300(CHEMTREC)
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: LYONDELL PETROCHEMICAL CO
Address: 1221 MCKINNEY AVE SUITE 1600
Box: 3646
City: HOUSTON TX 77253-3646
Phone: 713-652-7200
=======================================================
Ingredients
=======================================================
Name: DECOMP PRODS: OF SODIUM.
-----------------------------
Name: FIRST AID PROC:IF MORE THAN A HALF-CUP FULL OF THIS MATL IS SWALLOWED,
GIVE QTYS OF H*2O, INDUCE VOMIT & PROMPTLY
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: ING 8:OBTAIN MED ATTN. HIGH-PRESS INJECTIONS IN UNDERLYING TISS: IMMED
TREATMENT SHLD INCL EXTENSIVE INCISION,
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: ING 9: DEBRIDEMENT, & SALINE IRRIGATION. INADEQ TREATMENT MAY RSLT IN
TISS ISCHEMIA & GANGRENE. EARLY SMPS MINIMAL.
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: SPILL PROC:POSS; IN NATURAL ENVIRON, CLEANUP ON ADVICE FROM ECOLOGISTS.
EQUIP CLEANUP CREWS W/PROPER PROT EQUIP.
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: ING 11:COMPLY W/ALL APPLIC LAWS. SPILLS MAY NEED TO BE REPORTED TO
NATIONAL RESPONSE CTR (800-424-8802). SPILLED
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: ING 12: MATL & ANY SOIL OR WATER WHICH IT HAS CONTACTED MAY BE
HAZARDOUS TO ANIMAL/AQUATIC LIFE.
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: WASTE DISP:TREATMENT, TRANSPORTERS, & DISP SITES IN COMPLIANCE WITH
ALL APPLICABLE FED, STATE & LOC LAWS (FP N).
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: ING 14: POTENTIAL TREATMENT DISPOSAL METHODS INCLUDE INCINERATION AND
LAND DISPOSAL, IF PERMITTED.
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: HNDLG/STOR PREC: SKIN, AND/OR UNDERLYING TISSUE.
-----------------------------
Name: OTHER PREC: MEDICAL ATTENTION IF INJECTED ACCIDENTALLY.
-----------------------------
Name: HYGIENE PRACT: GASOLINE, SOLVENTS, KEROSENE, OR HARSH ABRASIVE SKIN
CLEANERS FOR WASHING EXPOSED SKIN AREAS.
-----------------------------
Name: ING 18:TAKE A SHOWER AFTER WORK IF GENERAL CONTACT OCCURS. REMOVE
OIL-SOAKED CLOTHING AND LAUNDER BEFORE REUSE.
-----------------------------
Name: ING 19: LAUNDER OR DISCARD CONTAMINATED LEATHER GLOVES AND SHOES.
-----------------------------
Cas: 64742-01-4
Name: RESIDUAL OILS, SOLVENT REFINED, (SOLVENT-REFINED RESIDUAL OIL
(PETROLEUM))
% Wt: >90
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 64742-62-7
Name: SOLVENT-DEWAXED RESIDUAL OIL (PETROLEUM)
% Wt: 0-6
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 64742-57-0
Name: SOLVENT REFINED HYDROTREATED RESIDUAL OIL; (HYDROTREATED RESIDUAL OIL
(PETROLEUM))
% Wt: 0-6
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Name: SODIUM SALT SOAP(S) OF PLANT OR ANIMAL DERIVED FATTY OILS.
% Wt: 4
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: EXPLO HAZ:OR BE EXPLOSIVE IN CONFINED SPACES IF EXPOSED TO AN IGNITION
SOURCE. MISTS OR SPRAYS MAY BE FLAMMABLE
OSHA PEL: 10 MG/M3 TDUST
ACGIH TLV: 10 MG/M3
-----------------------------
Name: ING 5: AT TEMPERATURES BELOW THE NORMAL FLASH POINT. KEEP AWAY FROM
EXTREME HEAT AND OPEN FLAME.
OSHA PEL: 10 MG/M3 TDUST
ACGIH TLV: 10 MG/M3
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: NO
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: SUMMARY: MILD EYE IRRIT MAY RSLT FROM CNTCT W/MATL.
INHAL/SKIN ABSORP: NO SIGNIFICANT ADVERSE HLTH EFTS ARE EXPECTED TO OCCUR
UPON SHORT-TERM EXPOSURE. EYE: EYE CNTCT W/THIS MATL MAY RESULT IN MILD EY E
IRRIT.SKIN: PRLNGD/RPTD SKIN CNTCT W/SIMILAR MATLS HAS PRODUCED MILD IRRIT
& INFLAMM. INGEST: (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: SWALLOWING MATL MAY CAUSE GI
DISTURBANCES SUCH AS NAUSEA, VOMITING, AND DIARRHEA. CHRONIC: SUMMARY:
PROLONGED AND/OR REPEATED CONTACT WITH THIS MATERIAL MAY PRODUCE SKIN
IRRITATION AND INFLA MMATION.
Medical Cond Aggravated By Exposure: PERSONNEL WITH PRE-EXISTING SKIN DISORDERS
SHOULD AVOID CONTACT WITH THIS PRODUCT.
First Aid: INHAL:REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE O2/ARTF RESP)(FP N).
EYE: FLUSH W/CLEAN, LOW PRESSURE WATER FOR @ LST 15 MINS. OCCSNLY LIFTING
EYELIDS. IF PAIN/REDNESS PERSISTS AFTER FLUSHING, OBTAIN M ED ATTN.
SKIN:REMOVE BY WIPING; THEN WASH SKIN THORO W/ PLENTY OF SOAP & WATER.
REMOVE CONTAM CLTHG & THORO CLEAN BEFORE REUSE. DISCARD CONTAM LEATHER
GLOVES & SHOES. INGEST:UNLIKELY. HOWEVER,
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CNTN SPILL & PVNT IT FROM ENTERING ALL WATER
BODIES. IF POSS, SAFELY STOP FLOW OF SPILL. HOT PROD WILL SOLIDIFY UPON
COOLING. ONCE SOLIDIFIED, IT CAN BE SHOVELED INTO PROPER CNTNRS SUITABLE FOR
REUSE/ DISP. IN URBAN AREA, CLEANUP AS SOON AS
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: THE SPILLED MATL & ANY WATER OR SOIL WHICH IT HAS
CONTACTED MAY BE HAZ TO ANIMAL/AQUATIC LIFE. MAX PROD RECOVERY FOR REUSE/
RECYCLING. CNDTNS OF USE MAY CAUSE THIS MATL TO BECOME A "HAZ WASTE", AS DEF
INED BY STATE OR FED LAWS. USE APPROVED
Handling And Storage Precautions: HIGH-PRESS SKIN INJECTION INJURIES:
HYDROCARBONS WHICH ARE HNDLD IN HIGH-PRESS GREASE/HYDRAULIC LINES MAY BE
ACCIDENTALLY INJECTED INTO EYES,
Other Precautions: HYDROCARBONS INJECTED INTO UNDERLYING TISSUES ARE NOT
READILY REMOVED BY BODY FLUIDS & CAN CAUSE PAIN, RAPID SWELLING, CHEMICAL
IRRIT & INFECTION. WORKERS MUST BE TRAINED IN THE DANGER OF THIS TYPE OF
INJURY & SHLD SEEK SPECIAL
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point Text: 550F,288C
Extinguishing Media: DRY CHEM, AND CO2. FOAM & WATER FOG ARE EFFECTIVE BUT
MAY CAUSE FROTHING.
Fire Fighting Procedures: FIRE INVOLVING THIS MATL, DO NOT ENTER ANY
ENCLOSED/CONFINED FIRE SPACE WITHOUT NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT (FP N) TO (SUPP DATA)
Unusual Fire/Explosion Hazard: SLIGHTLY COMBUST! OSHA/NFPA CLASS IIIB COMBUST
LIQ. WHEN HEATED ABOVE ITS FLASH POINT, THIS MATL WILL RELEASE FLAMM VAPS
WHICH CAN BURN IN THE OPEN
=======================================================
Control Measures
=======================================================
Ventilation: NONE NEEDED UNDER ANTICIPATED CONDITIONS OF USE.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM SAFETY GOGGLES (FP N).
Other Protective Equipment: NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices: WASH HANDS W/PLENTY OF SOAP & WATER BEFORE EATING,
DRINKING, SMOKING, OR USE OF TOILET FACILITIES. DO NOT USE
Supplemental Safety and Health: FIRE FIGHT PROC: PROT AGAINST HAZ EFTS OF
COMBUST PRODS & OXYGEN DEFICIENCIES. COOL TANKS & CNTNRS EXPOSED TO
FIRE W/ WATER. IMPROPER USE OF WATER AND EXTINGUISHING MEDIA CONTAINING WATER
MAY CAUSE FR OTHING WHICH CAN SPREAD FIRE OVER LARGER AREA.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: V6
B.P. Text: >600F,>316C
Vapor Pres: 0.1
Vapor Density: > 10
Spec Gravity: 0.95 (H2O=1)
Solubility in Water: NEGLIGIBLE
Appearance and Odor: DARK BROWN-COLORED, TACKY-TEXTURED, SEMI-SOLID; LUBE OIL
ODOR.
Percent Volatiles by Volume: NEGLIG
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXTREME HEAT AND OPEN FLAME.
Materials To Avoid: STRONG ACIDS, ALKALIES, AND OXIDIZERS SUCH AS OXYGEN AND
LIQUID CHLORINE.
Hazardous Decomposition Products: BURNING OR EXCESS HEATING MAY PRODUCE CARBON
MONOXIDE & OTHER HARMFUL GASES/VAPS INCL OXIDES &/OR OTHER CMPNDS
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: JET LUBRICANT TM, 1841618416
Company: LYONDELL PETROCHEMICAL CO
Street: 1221 MCKINNEY AVE SUITE 1600
PO Box: 3646
City: HOUSTON TX
Zipcode: 77253-3646
Health Emergency Phone: 800-245-4532;800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 09/15/1993
Status Code: C
Label Date: 09/15/1993
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: SLIGHTLY COMBUSTIBLE. KEEP AWAY FROM EXTREME HEAT AND
OPEN FLAME. ACUTE: INGESTION MAY CAUSE GASTROINTESTINAL IRRITATION. EYE
CONTACT MAY CAUSE MILD IRRITATION. SKIN CONTACT MAY CAUSE MILD IRRITATION
AND INFLAMMATION. CHRONIC: PROLONGED ORREPEATED SKIN CONTACT MAY PRODUCE
IRRITATION AND INFLAMMATION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|