3M GENERAL OFFICES -- SCOTCH-WELD DP-190 PART A TRANSLUCENT EPOXY A
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BSYWP
MSDS NAME: SCOTCH-WELD DP-190 PART A TRANSLUCENT EPOXY ADHESIVE
Kit Part: Y
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE:SEV IRRIT:SIGNS/SYMPS CAN INCL REDNESS, SWELL, PAIN,
TEARING, CLOUDY APPEAR OF CORNEA, IMPAIRED VISION & POSS PERMANENTLY
IMPAIRED VISION. DUST CREATED BY CUTTING, GRINDING, SANDING/ MACHINING MAY
CAUSE IRRIT. SKIN:ALLERGIC RXN:SIGNS/SYMPS CAN INCL REDNESS, SWELL,
BLISTERING & ITCHING. BURNS(CHEM (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:CORROSIVITY):SIGNS/SYMPS CAN INCL
REDNESS, SWELL, ITCHING, PAIN, BLISTERING, ULCERATION, SLOUGHING & SCAR
FORM. INHAL:IRRIT (UPPER RESP):SIGNS/SYMPS CAN INCL SORENESS OF NOSE &
THROAT, COUGHI NG & SNEEZING. VAPS OF HEATED MATL MAY CAUSE RESP SYS
IRRIT. DUST FROM CUTTING, GRINDING, SANDING/MACHINING MAY (SUPDAT)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYE:IMMED FLUSH W/LG AMTS OF WATER FOR AT LST 15 MINS. GET IMMED MED
ATTN. SKIN:IMMED WASH W/SOAP & LG AMTS OF WATER. REMOVE CONTAM CLTHG. IF
SIGNS/SYMPS OCCUR, CALL MD. WASH CONTAM CLTHG BEFORE REUSE & DISP OF
CONTAM SHOES. INHAL:REMOVE PERS TO FRESH AIR. IF SIGNS/SYMPS CONTINUE, CALL
MD. INGEST:IF SWALLOWED, DO NOT INDUCE VOMIT. GIVE VICTIM TWO GLASSES OF
WATER. CALL MD IMMED. NEVER GIVE
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: OBSERVE PRECAUTIONS FROM OTHER SECTIONS OF THIS MSDS.
COVER W/ABSORBENT MATERIAL. COLLECT SPILLED MATERIAL. PLACE IN AN APPROVED
METAL CONTAINER & SEAL.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISP MUST BE I/A/W FED, STATE & LOC REGS (FP N).
CURE PROD ACCCORDING TO PROD INSTRUCTIONS. INCIN UNCURED WASTE IN INDUS/
COMMERCIAL INCIN. DISP OF COMPLETELY CURED (OR POLYMERIZED) MATL IN SANIT
LAND FILL. SINCE REGS VARY, CONSULT APPLIC REGS/ (ING 7
Handling And Storage Precautions: STORE AWAY FROM HEAT. KEEP CONTAINER CLOSED
WHEN NOT IN USE. KEEP OUT OF THE REACH OF CHILDREN. AVOID EYE CONTACT. AVOID
SKIN CONTACT.
Other Precautions: AVOID INHALATION OF VAPORS CREATED DURING CURE CYCLE. AVOID
INHALATION OF DUST CREATED BY CUTTING, SANDING OR GRINDING. USE W/
APPROPRIATE LOCAL EXHAUST VENTILATION. DO NOT EAT, DRINK OR SMOKE WHEN US ING
THIS PRODUCT. DO NOT INGEST.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: >200F,>93C
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN
=======================================================
Control Measures
=======================================================
Respiratory Protection: SELECT THE FOLLOWING NIOSH/MSHA APPROVED RESPIRATORS
BASED ON AIRBORNE CONCENTRATION OF CONTAMINANTS & I/A/W OSHA REGULATIONS:
HALF-MASK DUST RESPIRATOR.
Ventilation: PROVIDE APPROP LOC EXHST FOR HEAT CURING, GRINDING, CUTTING/
SANDING CURED MATL. CURING OVENS MUST BE EXHAUSTED
Protective Gloves: BUTYL RUBBER, POLYETHYLENE OR
Eye Protection: ANSI APPRVD CHEM WORK GOGG W/FSHLD(FP N)
Other Protective Equipment: ANSI APPRVD EMERGENCY EYE WASH & DELUGE SHOWER (FP
N).
Work Hygienic Practices: WASH EXPOSED AREAS THOROUGHLY W/SOAP & WATER. WASH
HANDS AFTER HANDLING & BEFORE EATING.
Supplemental Safety and Health: KEY1;T6.NOTE:USERS OF "L" VERSION SHOULD
CONSULT "LR" VERSION FOR ADDNL INFO (FP N). EFTS OF OVEREXP:CAUSE IRRIT OF
RESP SYS. INGEST:DMG TO GI TISS:SIGNS/SYMPS CAN INCL PAIN, VOMIT, NAUS, ABDOM
TENDER NESS, BURNS OF MOUTH, DFCLTY SWALLOWING, BLOOD IN VOMITUS, BLOOD IN
FECES & ULCERATION. EXPOS TO THIS MATL IN NORMAL (IN
=======================================================
Physical/Chemical Properties
=======================================================
HCC: T6
Spec Gravity: 1.01 (H2O=1)
Solubility in Water: NIL
Appearance and Odor: LIQUID, LIGHT AMBER; SLIGHT AMINE ODOR.
Percent Volatiles by Volume: 0 (WT)
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE KNOWN
Materials To Avoid: NONE KNOWN
Hazardous Decomposition Products: CARBON MONOXIDE & CARBON DIOXIDE, TOXIC
VAPORS, GASES OR PARTICULATES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCH-WELD DP-190 PART A TRANSLUCENT EPOXY ADHESIVE
Company: MINNESOTA MINING AND MFG CO, DBA 3M
Street: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 09/09/1993
Status Code: C
Label Date: 09/09/1993
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: STORE AWAY FROM HEAT. AVOID INHALATION, SKIN & EYE
CONTACT. ACUTE:INHAL:IRRITATION OF UPPER RESPIRATORY SYSTEM. INGEST:DAMAGE OF
GASTROINTESTINAL TISSUES. EYE CONTACT:SEVERE IRRITATION, POSSIBLE PERMA NENT
IMPAIRED VISION. SKIN CONTACT:ALLERGIC REACTION, BURNING. CHRONIC:NONE LISTED
BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|