PRO-LINE PAINT CO -- 40 THINNER FOR 4900 SERIES
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BTXFM
MSDS NAME: 40 THINNER FOR 4900 SERIES
Responsible Party
Name: PRO-LINE PAINT CO
Address: 2646 MAIN ST
City: SAN DIEGO CA 92113-3697
Info Phone: 619-231-2313;619-232-8968
Emergency Phone Number: 619-728-3192;619-488-9364
Preparer's Name: E. SOETERIK
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PRO-LINE PAINT CO
Address: 2646 MAIN STREET
City: SAN DIEGO CA 92113-3697
Phone: 619-231-2313; 619-232-8968
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HEALTH HAZARDS: TOXIC IF SWALLOWED. CAN
CAUSE BURNING SENSATION, VOMITING, DIARRHEA, DROWSINESS. ASPIRATION OF VOMIT
INTO LUNGS CAN CAUSE PNEUMONITIS. RPTS HAVE SHOWN THAT RPTD & PRLNGD
OCCUP OVEREXP TO SOLVS CAN CAUSE PERM BRAIN & NERV SYS DMG. INTENTIONAL
MISUSE BY DELIB CONC & INHAL CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated By Exposure: ASTHMA AND SKIN ALLERGIES.
First Aid: EYE: FLUSH IMMED WITH FRESH WATER FOR AT LEAST 15 MINS BY AN EYE
WASH APPARATUS OR BY HAND. SEEK MED ATTN. SKIN: WASH IMMED WITH WATER. THEN
WASH WITH SOAP AND WATER, RINSE IMMED. SEEK MED ATTN. INHAL : MOVE PERSON TO
FRESH AIR; ARTF RESP IF NEC. SEEK MED ATTN. INGEST: SEEK MED ATTN. RECOM TO
PHYS: IN ACUTE CASES SEEK MED ATTN IMMED. FOR WORKERS WHO MAY BE EXPOS
REG,PROVIDE DETAILED PERIODIC EXAMS.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE ALL TYPES OF IGNITION SOURCES. PROVIDE
SUFFICIENT VENTILATION. PROTECT CLEAN-UP PERSON WITH 8540 3M CORP RESPIRATOR
AND GOGGLES.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: USE METAL CONTAINER MARKED "DO NOT REUSE". PUT MATERIAL
IN THIS CONTAINER. USE VERMICULITE OR OTHER INERT ABSORBENT. KEEP AWAY FROM
SEWER. DISPOSE OF ALL WASTES IN ACCORDANCE WITH FEDERAL, STATE AND L OCAL
REGULATIONS.
Handling And Storage Precautions: USE ONLY W/ADEQ VENT. PROT AGAINST PHYS DMG
TO CNTNRS & SPILLAGE. STORE IN A COOL WELL VENT AREA WITH SPRINKLER SYS.
KEEP AWAY FROM HEAT. POST(SUPDAT)
Other Precautions: WHEN PRODUCT IS RECEIVED IN 55 GALLON DRUM, DO NOT CUT INTO
EMPTY DRUM WITH ACETYLENE TORCH OR ALLOW ANY OPEN FLAMES NEAR DRUM UNLESS
DRUM IS CLEAN AND PURGED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point Text: 120F,49C
Lower Limits: 1.26%
Upper Limits: 15.8%
Extinguishing Media: CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP(FP
N). BLANKET FLAME W/ONE OF EXTING MEDIA. VAPS OF COMBUST MAY BE IRRIT TO RESP
TRACT. MAY CAUSE BRTHG (SUPDAT)
Unusual Fire/Explosion Hazard: KEEP MATERIAL AWAY FROM HEAT, SPARKS, AND OPEN
FLAMES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPRVD DUST/MIST RESP (HIGH EFFICIENCY
CARTRIDGES ADVISED) IF SPRAYING/SANDING. USE NIOSH/MSHA APPRVD ORG VAP
CARTRIDGE RESP IF TLV FOR SOLV COMPONENTS MAY BE EXCEEDED E.G. 8540 3M CORP
RESP. WHEN USING IN CONFINED (SUPDAT)
Ventilation: USE LOCAL EXHAUST WHEN APPLYING THIS PAINT IN CONFINED AREAS. KEEP
VAPORS BELOW TLV.
Protective Gloves: SOLVENT RESISTANT GLOVES.
Eye Protection: ANSI APPVD CHEM WORK GOGG W/FULL (SUPDAT
Other Protective Equipment: USE PROT CLTHG AND CHG CONTAMD CLOTHING IMMED. PROV
ANSI APPVD EMER SHWRS & EYEWASH AT STAT PAINT APPLIC FACILITIES.
Work Hygienic Practices: TRAIN EMPLOYEES ON ALL SPECIAL HANDLING PROCEDURES IN
THIS SECTION BEFORE THEY WORK WITH THIS PRODUCT.
Supplemental Safety and Health: FIRE FIGHT PROCEDURES: DIFFICULTIES. PREVENT
HUMAN EXPOSURE TO FIRE, SMOKE, FUMES, ETC. HAZARDOUS DECOMPOSITION PRODUCTS:
CARBON MONOXIDE OR ISOBUTYLENE. HANDLING/STORAGE PRECAUTIONS: NO SMOKING
SIGNS . RESPIRATORY PROTECTION: AREA, USE NIOSH/MSHA APPROVED AIR- FED HOOD.
EYE PROT: LGTH FCSHLD (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
HCC: F4
B.P. Text: 301F,149C
M.P/F.P Text: 130F,54C
Vapor Pres: 1.3 @ 20C
Vapor Density: 3.6
Spec Gravity: 0.913 @ 20C
Evaporation Rate & Reference: 0.22 (N-BUTYL ACETATE=1)
Solubility in Water: COMPLETE
Appearance and Odor: CLEAR-MILD AROMATIC ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT, SPARKS AND OPEN FLAMES. DO NOT ALLOW VAPORS
TO ACCUMULATE.
Materials To Avoid: STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: FLAMM FUMES MAY ACCUMULATE IN CONFINED AREA &
SPARKS/OPEN FLAMES MAY IGNITE IT. MAY LIBERATE CARBON DIOXIDE, (SUPDAT)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: EXTREME HEAT, SPARKS AND OPEN FLAMES.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 40 THINNER FOR 4900 SERIES
Company: PRO-LINE PAINT CO
Street: 2646 MAIN STREET
City: SAN DIEGO CA
Zipcode: 92113-3697
Health Emergency Phone: 619-728-3192;619-488-9364
Label Required IND: Y
Date Of Label Review: 11/19/1993
Status Code: C
Label Date: 11/19/1993
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: KEEP AWAY FROM HEAT. STORE IN A COOL WELL VENTILATED
AREA. ACUTE: EXCESSIVE INHALATION OF VAPORS CAN CAUSE NASAL AND RESPIRATORY
IRRITATION, DIZZINESS, NARCOTIC EFFECT. SKIN OR EYE CONTACT: BURNING SE
NSATION FROM VAPOR OR LIQUID. DERMATITIS, SENSITIZATION. HIGH CONCENTRATIONS
CAN BE IRRITATING. SKIN ABSORPTION CAUSES DEFATTING AND IRRITATION. TOXIC IF
SWALLOWED. CAN CAUSE BURNING SENSATION, VOMITI NG, DIARRHEA, DROWSINESS.
ASPIRATION CAN CAUSE PNEUMONITIS. CHRONIC: REPORTS HAVE ASSOCIATED REPEATED
AND PROLONGED OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND NERVOUS
SYSTEM DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
KLEAN E.Z. SUPER CONCENTRATE, P/N 3315C
| 6834-92-0
26027-38-3
111-76-2 |
|
KLEAN E.Z. ALL PURPOSE CLEANER, P/N 3305R
| 6834-92-0
26027-38-3
111-76-2
67-63-0 |
|
1 GAL V 740 THERM COND SIL CPD,60235
| 1314-13-2
63148-62-9 |
|
5083 CONTACT CLEANER (AERO)
| 76-13-1 |
|
ALL CLIMATE 10W30
| |
|
PESTICIDES MIXTURE, US-118
| 140-57-8
510-15-6
2303-16-4
465-73-6
143-50-0
23950-58-5
75-09-2 |
|
PHENOLS MIXTURE, US-117
| 75-09-2
95-48-7
108-39-4
106-44-5
87-65-0
88-85-7
70-30-4
58-90-2
95-95-4 |
|
ORGANOPHOSPHOROUS PESTICIDES MIXTURE, US-119
| 75-09-2
60-51-5
298-04-4
52-85-7
298-00-0
56-38-2
298-02-2
3689-24-5
297-97-2
126-68-1 |
|
BASE NEUTRALS MIXTURE 3, US-114
| 60-11-7
119-93-7
122-09-8
122-39-4
134-32-7
91-59-8
99-55-8
62-44-2
106-50-3
95-53-4
75-09-2
53-96-3
92-67-1
91-94-1 |
|
PYRIDINES MIXTURE, US-120A
| 67-56-1
91-80-5
56-57-5
109-06-8
110-86-1 |
|
ORGANOCHLORINE PESTICIDES MIXTURE, US-112A
| 58-89-9
72-54-8
72-55-9
50-29-3
60-57-1
959-98-8
33213-65-9
1031-07-8
72-20-8
7421-93-4
76-44-8
1024-57-3
72-43-5
67-64-1
309-00-2
319-84-6
319-85-7
319-86-8 |
|
BASE/NEUTRALS MIXTURE 4, US-115
| 75-09-2
98-86-2
99-65-0
121-14-2
606-20-2
62-50-0
78-59-1
120-58-1
66-27-3
130-15-4
98-95-3
82-68-8
94-59-7
99-35-4 |
|
SILVER SOLDER BRAZING FLUX
| 7789-29-9 |
|
URALITE 7250 PART A
| 5124-30-1
68310-52-1 |
|
URALITE 7250 PART B
| 101-77-9
25214-70-4
69178-40-1
872-50-4 |
|
ETHYLENE DIAMINETETRAACETIC ACID
| |
|
129, COPPER STANDARD SOLUTION-10.0+/- 0.1 MG/L AS CU
| 7664-93-9
7732-18-5
3251-23-8 |
|
2046, NITRATE NITROGEN STANDARD SOLUTION (SUPP DATA)
| 7757-79-1
7732-18-5 |
|
318 TAPPING OILS
| 64742-52-5
72162-15-3
68920-70-7
8001-85-2 |
|
ANCHOR CEMENT
| |
|
JAQUAR, 4279
| |
|
XB 5154 (FORMERLY LMB 5241), FPC6037
| |
|
ACETYLENE
| 74-86-2 |
|
HUMISEAL, 1C51
| |
|
REDI-SEAL W/TROWEL, 0169
| |
|
EYPEL-F GUM
| |
|
SHADOWCURE TYPE AR CONFORMAL COATING
| 108-88-3
67-64-1
75-28-5
74-98-6
763-69-9 |
|
5-WAY PENETRANT
| |
|
40 THINNER FOR 4900 SERIES
| |
|
PILOBOND 2024, 584211
| |
|
NIKLAD MULTIPREP 506
| |
|
Y9000 DEEP GLOSS SERIES-BRUSHABLE LINEAR (SUPDAT)
| |
|
UNITED 403
| 111-76-2 |
|
UNITED 384
| 57-55-6 |
|
UNITED 300
| |
|
UNITED 21
| 1310-73-2
7631-99-4 |
|
UNITED 228
| |
|
UNITED 264
| 64-17-5 |
|
UNITED 299
| 1310-58-3 |
|
UNITED 277
| 7664-38-2 |
|
UNITED 53
| |
|
UNITED 656
| |
|
073 ENDURA SHIELD III, F073-AA30A
| |
|
STAR XB2425 1229 INK
| 147-14-8 |
|
1 GAL FAST EVAPORATING ACT, 11476
| 67-64-1
9003-37-6 |
|
EPOXY, 317A
| |
|
EPOXY, 317B
| |
|
CHEMLOK 607
| 67-56-1
64-17-5
7732-18-5
3037-72-7 |
|
893, DERUSTO RUST PREVENTATIVE ENAMELS VOC FORMULAS
| |
|
885, DERUSTO RUST PREVENTATIVE ENAMELS VOC FORMULAS
| |
|
|