styrene acrylic copolymer (mfr cas # 25053-46-2) iron oxide; (magnetite) dye; (dyestuff) propene polymers; (polypropylene wax) silica
UNITED LASER -- III SI REPLACEMENT TONER
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BVXVT
MSDS NAME: III SI REPLACEMENT TONER
Responsible Party
Name: UNITED LASER
Address: 1541 S BERETANIA ST 301
City: HONOLULU HI 92826
Info Phone: 808-941-1220
Emergency Phone Number: 808-941-1220
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: RECHARGERS
Address: UNKNOWN
City: BEN WHEELER TX 75754
Phone: 903-941-1220
Name: UNITED LASER
Address: 1541 S.BERETANIA ST #301
Box: 301
City: HONOLULU HI 96826
Phone: 516-488-6700/800-424-9300(CHEMTREC)
=======================================================
Ingredients
=======================================================
Cas: 25036-16-2
Name: STYRENE ACRYLIC COPOLYMER (MFR CAS # 25053-46-2)
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 1317-61-9
Name: IRON OXIDE; (MAGNETITE)
OSHA PEL: 10 MG/M3
ACGIH TLV: 5 MG/M3
------------------------------
Cas: 31714-55-3
Name: DYE; (DYESTUFF)
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 9003-07-0
RTECS #: TR5000000
Name: PROPENE POLYMERS; (POLYPROPYLENE WAX)
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 112945-52-5
RTECS #: VV7310000
Name: SILICA
OSHA PEL: 6 MG/M3
ACGIH TLV: 10 MG/M3
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: NO KNOWN HEALTH HAZARD WHEN USED AS INTEDED IN LASER
PRINTER.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: MINIMAL IRRITATION OF EYES AND RESPIRATORY
TRACT MAY OCCUR IN HEAVY DUST.
Medical Cond Aggravated By Exposure: NONE KNOWN.
First Aid: INHALATION: REMOVE FROM EXPOSURE. SKIN: WASH WITH SOAP. EYES: FLUSH
WITH WATER FOR AT LEAST 15 MINUTES. INGESTION: DRINK WATER.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: VACUUM OR SWEEP AS WITH ANY NONTOXIC POWDER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.
Handling And Storage Precautions: DO NOT STORE NEXT TO STRONG OXIDIZERS.
Other Precautions: AVOID EXPOSURE TO HEAT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER SPRAY, FOAM, DRY CHEMICAL, CARBON DIOXIDE, SAND.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N). AVOID INHALING SMOKE.
Unusual Fire/Explosion Hazard: MATERIAL CAN FORM EXPLOSIVE MIXTURES WHEN
SUSPENDED IN AIR. AVOID ALL IGNITION SOURCES.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN (FP N).
Ventilation: NORMAL OFFICE CONDITIONS.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPROVED CHEM WORKERS GOGG (FP N).
Other Protective Equipment: NONE REQUIRED.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: SPECIFIC GRAVITY: 1.15-1.30 (H*2O=1).
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
M.P/F.P Text: >212F,>100C
Spec Gravity: SUPP DATA
Solubility in Water: INSOLUBLE
Appearance and Odor: BLACK POWDER, FAINT ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: OPEN FLAME.
Materials To Avoid: NONE WITH COMMON MATERIALS WHICH PRODUCT MAY REASONABLY
COME INTO CONTACT.
Hazardous Decomposition Products: TOXIC DECOMPOSITION PRODUCTS FORMED ON
COMBUSTION.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: III SI REPLACEMENT TONER
Assigned IND: Y
Company: UNITED LASER
Street: 1541 S.BERETANIA ST #301
PO Box: 301
City: HONOLULU HI
Zipcode: 96826
Health Emergency Phone: 808-941-1220
Label Required IND: Y
Date Of Label Review: 10/27/1994
Status Code: C
Label Date: 10/27/1994
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: NO KNOWN HEALTH HAZARD WHEN USED AS INTEDED IN
LASER PRINTER. MINIMAL IRRITATION OF EYES AND RESPIRATORY TRACT MAY OCCUR IN
HEAVY DUST. CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.