UCB RADCURE INC -- B-CEA; 022L212
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BWPPX
MSDS NAME: B-CEA; 022L212
Responsible Party
Name: UCB RADCURE INC
Address: 2000 LAKE PARK DR
City: SMYRNA GA 30080
Info Phone: 404-801-3248; 404-433-6421
Emergency Phone Number: 800-424-9300(CHEMTREC)
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: UCB RADCURE INC
Address: 2000 LAKE PARK DR
City: SMYRNA GA 30080
Phone: 404-801-3248; 404-433-6421
=======================================================
Ingredients
=======================================================
Cas: 24615-84-7
Name: B-CARBOXYETHYL ACRYLATE
% Wt: >40
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Name: HIGHER HOMOLOGS OF ACRYLIC ACID
% Wt: <40
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
-----------------------------
Cas: 79-10-7
RTECS #: AS4375000
Name: ACRYLIC ACID (SARA 313) (CERCLA)
% Wt: 20
OSHA PEL: SEE 1910.1045
ACGIH TLV: 2 PPM, S
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Name: CNDTNS(POLYMER): RUPTURE OF SEALED STOR VESSELS/CNTNRS. AVOID PEROXIDES,
STRONG OXIDIZING AGENTS, COPPER, COPPER
-----------------------------
Name: ING 4: ALLOYS, CARBON STEEL, IRON, RUST & STRONG BASES.
-----------------------------
Name: EYE PROT: FULL LENGTH FACE SHIELD(FP N).
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INGEST: CONTAINS MATLS THAT MAY BE SLIGHTLY TOXIC. INHAL:
CONTAINS MATLS THAT HAVE POTENTIAL TO CAUSE HEADACHES, NAUSEA, DIZZINESS
& RESPIRATORY IRRIT IF INHALED. SKIN(ABSORP): CONTAINS MATLS THAT MAY BE
MOD TOXIC. SKIN: CONTAINS MATLS THAT MAY CAUSE CHEMICAL BURN ON SKIN
&/SENSITIZATION. PLNGD CONTACT(EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: MAY CAUSE BLISTER FORMATION
(BURNS). SINCE IRRITATION MAY NOT OCCUR IMMEDIATELY, CONTACT CAN GO
UNNOTICED. EYE: CONTAINS MATLS THAT MAY CAUSE CHEMICAL BURN IN EYE -- DAMAGE
IRREVERSIBLE.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYE: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS & SEEK MED
ATTN. SKIN: REMOVE CONTAMD CLTH & WASH CONT AREA W/SOAP & WATER FOR
15 MINS. PARTICULAR ATTN SHOULD BE PAID TO HAIR, NOSE, EARS & OTHER ARE
AS NOT EASILY CLEANED. INGEST: IF APPRECIABLE QTYS ARE INGESTED, SEEK MED
ATTN. INHAL: EXPOS TO HIGH CONCS OF VAP/MIST, REMOVE PRES TO FRESH AIR. IF
BRTHG HAS STOPPED, ADMIN ARTF RESP & SEEK MED ATTN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SPONT POLYMERIZATION CAN OCCUR. ELIM IGNIT SOURCES.
USE EYE & SKIN PROT. PLACE LEAKING CNTNRS IN WELL VENT AREA. ABSORB
W/INERT MATL & DISP. FLUSH AREA W. WATER; PVNT WASHINGS FROM ENTERING
WATERWAYS. SPILLS/RELEASES TO ENVIRON MAY BE (SUPP DATA)
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: INCINERATE OR USE BIOLOGICAL TREATMENT IN ACCORDANCE
WITH LOCAL, STATE & FEDERAL REGULATIONS.
Handling And Storage Precautions: KEEP CNTNR CLOSED WHEN NOT IN USE. AVOID
PLNGD EXPOS TO LIGHT. STORE AT TEMPS <100F. REMOVE CONTAMD CLTHG, SHOES,
BELTS & OTHER LEATHER GOODS IMMED.
Other Precautions: INCINERATE LEATHER GOOD(INCLG SHOES). AVOID CONTACT W/SKIN
& EYES. AVOID BREATHING VAPOR. WASH CONTAMD CLTHG THOROUGHLY BEFORE
REUSE. SOLVENTS SHOULD NOT BE USED TO CLEAN SKIN BECAUSE OF INCREASE PENE
TRATION POTENTIAL.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point Text: >148F,>64C
Extinguishing Media: USE CO*2/DRY CHEMICAL ON SMALL FIRES; AQUEOUS FORM OR
WATER FOR LARGE FIRES.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP(FP
N). REMOVE ALL IGNIT SOURCES.
Unusual Fire/Explosion Hazard: HIGH TEMPS & FIRE CNDTNS MAY CAUSE RAPID
& UNCONTROLLED POLYMERIZATION WHICH CAN RSLT IN EXPLOS & VIOLENT
RUPTURE OF STOR VESSELS/CNTNRS. AVOID USE OF(SUPDAT)
=======================================================
Control Measures
=======================================================
Respiratory Protection: WHEN EXPOS TO AEROSOLS/VAPORS, USE NIOSH/MSHA APPRVD
FULL FACE ORGANIC VAPOR CATRIDGE RESP W/PARTICULATE PRE-FILTER. IN EMERGENCY
SITUATIONS, OR WHEN USED IN CONFINED SPACES, USE NIOSH/MSHA APPROVEDSC
BA/OTHER AIR SUPPLIED FULL FACE RESP.
Ventilation: LOC EXHST: RECOMM TO CONTRL EXPOS WHICH MAY RSLT FROM OPERATIONS
GENERATING AEROSOLS & HOT OPERATIONS GENERATING(SUPDAT)
Protective Gloves: NEOPRENE GLOVES & BARRIER CREAM (SUPDAT)
Eye Protection: ANSI APPRVD CHEM WORKS GOGGS &
Other Protective Equipment: FOR OPERATIONS WHERE CONTACT CAN OCCUR, A ANSI
APPROVED SAFETY SHOWER & EYE WASH FACILITY SHOULD BE AVAILABLE.
Work Hygienic Practices: WASH SKIN THOROUGHLY WITH SOAP & WATER AFTER HANDLING.
Supplemental Safety and Health: EXPLO HAZ:STREAM OF WATER TO CONTROL FIRES
SINCE FROTHING CAN OCCUR. MATLS TO AVOID:RUST & STRONG BASES. SPILL PROC:
REPORTABLE TO NATIONAL RESPONSE CENTER(800-424-8802) & TO STATE &/LOC
AGENCIES. VEN T:VAPS. MECH:NOT RECOMM TO CONTROL EXPOS FOR OPERATIONS
GENERATING AEROSOLS/VAPS. GLOVES: APPLIED BEFORE EXPOS & GLOVES.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >103F,>39C
Vapor Density: 5.0
Spec Gravity: 1.2 (FP N)
Solubility in Water: SOLUBLE
Appearance and Odor: CLEAR PALE YELLOW THIN LIQUID WITH CHARACTERISTIC ACRYLATE
ODOR.
Percent Volatiles by Volume: <0.1
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: STOR >100F EXPOS TO LIGHT, LOSS OF DISSOLVED AIR.
LOSS OF POLYMERIZATION INHIBITOR, CONTAM W/INCOMP MATLS.
Materials To Avoid: POLYMERIZATION INITIATORS INCLG PEROXIDES, STRONG OXIDIZING
AGENTS, COPPER, COPPER ALLOYS, CARBON STEEL, IRON(SUPDAT)
Hazardous Decomposition Products: FUMES PRODUCED WHEN HEATED TO DECOMP MAY
INCLUDE: CARBON MONOXIDE, CARBON DIOXIDE.
Hazardous Polymerization Indicator: YES
Conditions To Avoid Polymerization: UNCONTROLLED POLYMERIZATION MAY CAUSE RAPID
EVOLUTION OF HEAT & INCREASED PRESSURE THAT COULD RSLT IN VIOLENT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: B-CEA; 022L212
Company: UCB RADCURE INC
Street: 2000 LAKE PARK DR
City: SMYRNA GA
Zipcode: 30080
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 02/07/1995
Status Code: C
Label Date: 02/07/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Moderate
Reactivity Hazard: Moderate
Hazard And Precautions: COMBUSTIBLE. HAZARDOUS POLYMERIZATION MAY OCCUR. ACUTE:
INGEST: CONTAINS MATLS THAT MAY BE SLIGHTLY TOXIC. INHAL: CONTAINS MATLS THAT
HAVE POTENTIAL TO CAUSE HEADACHES, NAUSEA, DIZZINESS & RESPIRATORY IRRIT
IF INHALED. SKIN(ABSORP): CONTAINS MATLS THAT MAY BE MOD TOXIC. SKIN:
CONTAINS MATLS THAT MAY CAUSE CHEMICAL BURN ON SKIN &/SENSITIZATION.
PLNGD CONTACT MAY CAUSE BLISTER FORMATION (BURNS). MAY CAUSE EYE BURNS.
DAMAGE IRREVERSIBLE. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
8690 EPOXY FOR FIBER OPTIC CONNECTORS-PART A (RESIN)
| 25068-38-6
28064-14-4
3101-60-8
2530-83-8 |
|
8690 EPOXY FOR FIBER OPTIC CONNECTORS-PART B (SUPDAT)
| 4246-51-9
68610-56-0
68585-28-4
111-40-0 |
|
BLACK TONER (HCB-8T)
| 1333-86-4 |
|
CYAN TONER (HCC-13T)
| 32517-36-5 |
|
PERMATEX BATTERY CLEANER, 80369
| 7732-18-5
75-28-5
144-55-8
102-71-6
111-76-2 |
|
USCALRITE TEC E-1
| |
|
LUBRIMATIC MULTIPURPOSE LITHIUM GREASE, 11300
| |
|
EXPANDING FOAM SEALANT
| |
|
INSULIN,HUMAN,HI 0211
| 8049-62-5
9009-65-8
56-81-5
108-39-4
99-76-3
108-95-2
7732-18-5 |
|
PERMATEX GASKET REMOVER, 4MA
| 75-09-2
67-63-0
1330-20-7
75-28-5
74-98-6
100-41-4
8052-41-3
9004-65-3
141-43-5
7732-18-5 |
|
PS-6768B BLACK PREMIXED SOLUTION
| |
|
PS-68Y YELLOW PREMIX SOLUTION
| |
|
PS-68M MAGENTA PREMIXED SOLUTION
| |
|
M SERIES OPC, 1710050-001
| |
|
COTTON & SYNTHETIC FIBER WASTE
| |
|
HENCO-MASK II (BLUE) AEROSOL, 10-778
| |
|
POLYFLEX THINSET MORTAR 257/258
| 65997-15-1
14808-60-7 |
|
FLOOR GROUT & JOINT FILLER
| 65997-15-1
14808-60-7 |
|
BINKS GUNNER'S MATE LUBE
| |
|
ZINC ION EXCHANGE RESIN 20618
| |
|
STAND OFF TILE & MASONRY PROTECTOR
| |
|
RTA-50
| |
|
RESIN COMPONENT PART 1, ULTRA BOND EPOXY
| |
|
HARDENER COMPONENT PART 2, ULTRA BOND EPOXY
| 84-74-2
101-77-9 |
|
EBECRYL 80, IRR 168
| |
|
EBECRYL 270, 022L106
| |
|
B-CEA; 022L212
| 24615-84-7
79-10-7 |
|
VIKING DELETION PEN, 77-9804-1374-2
| 96-48-0
7732-18-5
1341-49-7 |
|
CHLORIDE REAGENT 2S, 7624
| 7761-88-8 |
|
DPD 3 TABLET, 6197
| 7732-18-5
7681-11-0 |
|
SUPER X OIL-VACUUM PUMP LUBRICANT, D-250-76
| |
|
SUPER X OIL-VACUUM PUMP LUBRICANT, D-250-76
| |
|
H52 FORMULA 2 EPOXY GLUE PART B
| |
|
PERMANENT THREADLOCKER 262, 26221
| 25852-47-5
39382-25-7
80-15-9
9002-88-4
81-07-2
613-48-9
112945-52-5 |
|
SCOTCHGRIP BRAND RUBBER ADHESIVE 1711
| 108-88-3
64742-88-7
9010-98-4
68611-24-5
63393-89-5
110-54-3
64-17-5 |
|
RESOVLE (R) PROCARE (TM) CARPET & ROOM DEODORIZER-ALL SCENTS
| 1344-28-1
14808-60-7
7757-82-6
144-55-8
68989-22-0
110-98-5 |
|
TYPE 152 DEVELOPER PREMIX, 76-6969-5889-7
| 7439-89-6
25213-39-2
58353-09-6
39382-25-7
1333-86-4
9003-07-4
8005-02-5 |
|
51605B (JETPAPER, BLUE), PRINT CARTRIDGES (SUPDAT)
| |
|
51605G (JETPAPER, GREEN), PRINT CARTRIDGES (SUPDAT)
| |
|
51605R (JETPAPER, RED), PRINT CARTRIDGES (SUPDAT)
| |
|
POWER-CLEAN BLANKET WASH, 83-5-105451 5 GAL
| |
|
DERMA SHIELD SKIN PROTECTANT
| |
|
NITROGEN REFRIGERATED LIQUID
| 7727-37-9 |
|
XYLENE
| |
|
MIL-L-22851C(2) IIIB, LUBRICATING OIL
| 64742-54-7
64742-57-0 |
|
GOLDEN GATE PREMIUM 10W/30, B1907
| 64742-54-7 |
|
CA-NF (400), 4416
| |
|
MICROID DIAMOND COMPOUND (PASTE), 810-872
| 9038-95-3
112945-52-5 |
|
P-403
| 64-17-5 |
|
DRIPSTOP 945
| 80-15-9
81-07-2 |
|
|