===================== Product Identification =====================
MSDS NAME:RP 6422 HARDENER
NIIN:00F006751
Kit Part:Y
MSDS Number: BBWKR
=== Responsible Party ===
Company:CIBA-GEIGY CORP REN PLASTICS DIV
Address:4917 DAWN AVE
City:EAST LANSING
State:MI
ZIP:48823-5605
Country:US
Info Phone Num:517-351-5900 / FAX 517-351-9003
Emergency Phone Num:517-351-5900
CAGE:02684
=== Contractor Identification ===
Company:CIBA SPECIALTY CHEMICALS CORPORATION
Address:4917 DAWN AVE
Box:City:EAST LANSING
State:MI
ZIP:48823-5691
Country:US
Phone:517-351-5900
CAGE:02684
============= Composition/Information on Ingredients =============
Name:4,4'-METHYLENE DIANILINE (SARA III)
CAS:101-77-9
RTECS #:BY5425000
ACGIH TLV:S; 0.1 PPM; A2; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:DIBUTYL PHTHALATE (SARA III)
CAS:84-74-2
RTECS #:TI0875000
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3; 9192
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
Name:POLYMER OF FORMALDEHYDE, ANILINE, 2-ETHYL ANILINE
===================== Hazards Identification =====================
LD50 LC50 Mixture:NOT GIVEN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:TOXIC BY INHALATION AND SKIN CONTACT.
SUSPECTED HUMAN CARCINOGEN. MAY CAUSE EYE IRRITATION, SKIN
IRRITATION, RESPIRATORY TRACT IRRITATION.
Explanation of Carcinogenicity:PRODUCT CONTAINS MDA (101-77-9) WHICH IS
LISTED BY NTP AND IARC AND REGULATED BY OSHA AS A CARCINOGEN.
Effects of Overexposure:FEVER, CHILLS, ANOREXIA, VOMITING. MAY CAUSE
TRANSIENT LIVER DAMAGE AND CYANOSIS, EYE IRRITATION, SKIN
IRRITATION, RASHES, RESPIRATORY TRACT IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
Eyes: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH
WITH SOAP & WATER. REMOVE CONTAMINATED CLOTHING/LAUNDER BEFORE RE-
USE. INGESTION: IF CONSCIOUS, GIVE WATER. INDUCE VOMITING.
INHALATION: REM OVE TO FRESH AIR. GIVE OXYGEN. CALL PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:>300F,>149C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER MIST.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND
FULL FACE-PIECE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DECOMPOSITION/COMBUSTION PRODUCTS MAY BE
TOXIC/HEATED PRODUCT MAY PRODUCE INHALABLE VAPORS.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN SAND OR
ABSORBENT SWEEPING COMPOUND, DISPOSE IF IN CSED CONTAINER. FLUSH
CONTAMINATED AREA WITH WATER; COLLECT WATER FOR PROR DISPOSAL.
AVOID CONTACT. CLEANUP PERSONNEL MUST WEAR PROPER PROTECTIVE
EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DANGER CORROSIVE-CAUSES EYE BURNS/SKIN
IRRITATION. HARMFUL IF SWALLOWED, IF ABSORBED THROUGH SN, OR IF
INHALED. MAY CAUSE ALLERGIC SKIN REACTION
Other Precautions:DON'T GET IN EYES. AVOID CONTACT W/SKIN & CLOTHING.
AVOID BREATHING VAPOR OR MIST. AVOID PROLONGED/REPEATED CONTACT
W/SKIN. EP CONTAINER CLOSED. USE W/ADEQUATE VENTILATION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR RESPIRATORY IF TLV
IS EXCEEDED.
Ventilation:MECH/LOCAL EXHAUST IN ACCORDANCE W/ACGIH RECOMMENDATIONS
Protective Gloves:IMPERMEABLE
Eye Protection:WEAR CHEMICAL GOGGLES
Other Protective Equipment:APPROPRIATE CLOTHING (APRONS, COVERRALLS,
GLOVES, FACE SHIELDS, GOGGLES, ETC) TO PREVENT DERMAL EXPOSURE.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
MSDS UPDATED BY DGSC-SSH TO REFLECT OSHA'S MORE STRINGENT STANDARDS FOR
MDA. USER SHOULD CONSULT LOCAL SAFETY OFFICE FOR SPECIFIC DETAILS
OF WORK PRACTICES, MEDICAL SURVEILLANCE AND HOUSEKEEPING PROCE
DURES FOR MDA EXPOSURES.
================== Physical/Chemical Properties ==================
HCC:T7
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:0.0
Spec Gravity:1.06
Solubility in Water:SLIGHT
Appearance and Odor:DARK RED LIQUID, WITH AMMONIACAL ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING ACIDS, METAL-ORGANIC COMPOUNDS
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME.
Hazardous Decomposition Products:CO, CO2 & NOX
==================== Disposal Considerations ====================
Waste Disposal Methods:CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL
FOR METHOD THAT WILL COMPLY WITH LOCAL, STATE & FEDERAL HEALTH AND
ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
B59 S 8 SILVER-BRITE ALUMINUM PAINT
| 64742-47-8
1330-20-7
64742-95-6 |
|
CELITE 501, 503, 522, 596, 597. P/N 9061
| 14464-46-1 |
|
GALLIC ACID POWDER
| 149-91-7 |
|
STARCH POWDER ARROWROOT
| 9005-25-8 |
|
THROMBOSCREEN THROMBOPLASTIN, 176099
| 26628-22-8 |
|
ML-90S
| |
|
ELECTROGRAPHIC PAPER
| |
|
ROCKWELL 555 SEALANT (BULK GRADE)
| 108-32-7 |
|
PA2 FLEXIBLE FOAM ADHESIVE
| 74-87-3 |
|
B59 S2 SILVER-BRITE ALUMINUM PAINT
| 64742-47-8
1330-20-7
64742-94-5
7789-06-2
7440-47-3 |
|
ASBESTOS-FREE CEMENT BOARD
| 65997-15-1
1317-65-3
9004-34-6 |
|
UNI-TILE SEALER PART A
| 1330-20-7
108-10-1
67-63-0 |
|
TAPE HEAD CLEANER, TUCO2
| 76-13-1 |
|
SILICONE FUSER OIL, LPS4X-AC
| |
|
FORMULA 291
| 1310-73-2 |
|
TONER (RICOH LP H-1 TONER) LPS4X-AA, PART
| 1333-86-4 |
|
DEVELOPER (RICOH LP H-1 DEVELOPER), PART B
| 1317-60-8
1314-13-2
1333-86-4 |
|
MITEE CLEAR THREAD CUTTING OIL
| 8012-95-1 |
|
VIDEO SCREEN CLEANER VT1XX-KF
| 7732-18-5
34590-94-8
1336-21-6 |
|
RP 4026 RESIN
| 7429-90-5
1302-78-9
2425-79-8 |
|
RP 4005 RESIN
| 2425-79-8 |
|
RP 4036 RESIN
| 7429-90-5
1317-65-3
2425-79-8
21645-51-2
25068-38-6
28064-14-4
1675-54-3 |
|
HALOCARBON 4.2S OIL
| |
|
RP 6403 HARDENER
| 120-07-0 |
|
RP 6403 RESIN, PART B
| 61788-32-7 |
|
RP 6413 RESIN, PART A
| 5124-30-1
4098-71-9 |
|
RP 6413 HARDENER, PART B
| 101-77-9 |
|
BLACK & WHITE INDICATING STOP BATH
| |
|
NON-SKID PAINT, 7-1182
| 1330-20-7
108-88-3
8030-30-6 |
|
HARD LEAD, ANTIMONIAL OR ARSENICAL ALLOY
| 7439-92-1
7440-36-0
7440-38-2
7440-31-5 |
|
PUROLITE C-100 S ION EXCHANGE RESIN
| |
|
AMMONIUM BIFLUORIDE, 418-002-03
| 1341-49-7 |
|
COATING-CLEAR WATER REPELLENT
| |
|
EPOXY RESIN, #642-644
| |
|
BUFFER SOLUTIONS PH 4.0-4.5/PH 4.36/PH 4.0
| 7732-18-5
50-00-0
64-19-7 |
|
SPEEDBALL, BLACK 4560, 4600, 4610
| |
|
TRANSPARENT-EXTENDER BASE 4532, 4572, 4578
| |
|
BLUE 4542, 4582, 4592 SPEEDBALL INK
| |
|
BLACK 3400, 3500, 3600 & 3700
| |
|
YELLOW 3405/3505/3605/3705 SPEEDBALL INK
| |
|
ORANGE 3407/3507/3607/3707 SPEEDBALL INK
| |
|
GREEN 3404/3504/3604/3704 SPEEDBALL INK
| |
|
RED 3401/3501/3601/3701 SPEEDBALL INK
| |
|
VINYL ATHLETIC COATING
| 108-88-3
78-93-3 |
|
DICK BLICK ADHESIVE, L61 119
| 75-09-2
8030-30-6
75-28-5
74-98-6 |
|
WHITE 3403/3503/3603/3703 SPEEDBALL INK
| |
|
SCULP-METAL MODELING METAL
| 78-93-3 |
|
RP 6422 RESIN
| 5124-30-1
101-68-8 |
|
RP 6422 HARDENER
| 101-77-9
84-74-2 |
|
RP 6402 HARDENER
| 110-63-4 |
|
|