| MSDS | : | B59 S 8 SILVER-BRITE ALUMINUM PAINT | | CAS | : | 64742-47-8
1330-20-7
64742-95-6 | | NAME | : | kerosene (petroleum), hydrotreated; petroleum distillate,
xylene, dimethylbenzene, xylol
solvent naphtha, petroleum, light aromatic, high flash
weight per gallon in pounds: 9.03
vol organic cmpd: 5.18
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:B59 S 8 SILVER-BRITE ALUMINUM PAINT
NIIN:00F006698
MSDS Number: BBWHC
=== Responsible Party ===
Company:SHERWIN-WILLIAMS CO
Address:101 PROSPECT AVE N W
City:CLEVELAND
State:OH
ZIP:44115-1042
Country:US
Info Phone Num:(216) 566-2902
Emergency Phone Num:(216) 566-2917
CAGE:54636
=== Contractor Identification ===
Company:SHERWIN-WILLIAMS CO THE
Address:101 PROSPECT AVE NW
Box:City:CLEVELAND
State:OH
ZIP:44115-1042
Country:US
Phone:800-251-2486/216-566-2242
CAGE:54636
============= Composition/Information on Ingredients =============
Name:KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,
HYDROTREATED
CAS:64742-47-8
RTECS #:OA5504000
Fraction by Wt: 14%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
Name:XYLENE, DIMETHYLBENZENE, XYLOL
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 13%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:SOLVENT NAPHTHA, PETROLEUM, LIGHT AROMATIC, HIGH FLASH
AROMATIC NAPHTHA
CAS:64742-95-6
RTECS #:WF3400000
Fraction by Wt: 29%
Name:WEIGHT PER GALLON IN POUNDS: 9.03
RTECS #:9999999WG
Name:VOL ORGANIC CMPD: 5.18
RTECS #:9999999VO
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY SYSTEM
IRRITATION, NERVOUS SYSTEM DEPRESSION, HEADACHE, DIZZINESS, NAUSEA,
LOSS OF COORDINATION, & POSSIBLY DEATH. SKIN/EYES: IRRITATION,
REDNESS, ITCHING OR BURNING SENSATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: ADVERSE EFFECTS TO LIVER, URINARY,
BLOOD FORMING, CARDIO-VASCULAR SYSTEMS, PERMANENT BRAIN/NERVOUS
SYSTEM DAMAGE. EYES: IRRITATION, REDNESS, ITCHING OR BURNING
SENSATION.
======================= First Aid Measures =======================
First Aid:INHALATION: IF AFFECTED, REMOVE FROM EXPOSURE. RESTORE
BREATHING. KEEP WARM & QUIET. SKIN: WASH AFFECTED AREA THOROUGHLY
W/SOAP & WATER. EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS.
INGESTION: OB TAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:103F
Lower Limits:0.7%
Upper Limits:6%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIP & SCBA. WATER SPRAY:
INEFFECTIVE. FOG NOZZLES: PREFERABLE. USE WATER TO COOL FIRE
EXPOSED CONTAINERS TO PREVENT PRESSURE BUILD-UP.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BUILD-UP PRESSURE,
EXPLODE OR AUTOIGNITE WHEN EXPOSED TO EXTREME HEAT. APPLICATION TO
HOT SURFACES REQUIRES SPECIAL PRECAUTIONS.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE &
REMOVE W/INERT ABSORBENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM HEAT/SPARKS/OPEN FLAME.
KEEP AREA VENTILATED. EXTINGUISH FLAMES/PILOT LIGHTS/HEATERS. TURN
OFF STOVES/ELEC TOOLS/APPLIANCES.
Other Precautions:CONSULT NFPA CODE. USE APPROVED BONDING/GROUNDING
PROCEDURES. KEEP CONTAINERS CLOSED WHEN NOT IN USE. TRANSFER ONLY
TO APPROVED CONTAINERS. DON'T TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN. AVOID CONTACT W/SKIN/EYES & BREATHING VAPORS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE A NIOSH/MSHA APPROVED PROPERLY FITTED
ORGANIC VAPOR/PARTICULATE RESPIRATOR. USE A NIOSH/MSHA APPROVED
DUST/MIST RESPIRATOR WHEN SANDING OR ABRADING THE DRIED FILM.
Ventilation:LOCAL EXHAUST: PREFERABLE. GENERAL EHXAUST: ACCEPTABLE
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/UNPERFORATED SIDESHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS AFTER USING.
Supplemental Safety and Health
BOILING RANGE: 222-415F. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING & INHALING THE CONTENTS CAN BE HARMFUL OR FATAL.
COMBUSTIBLE.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:SEE SUPP
Vapor Density:>AIR
Spec Gravity:0.89-1.09
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:58-81%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WATER, ACIDS, OR ALKALIS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME OR OTHER SOURCES
OF IGNTION
Hazardous Decomposition Products:CO, CO2, HYDROGEN
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE IN APPROVED FACILITY. DON'T
INCINERATE CLOSED CONTAINERS. DISPOSE OF IN ACCORDANCE
W/FEDERAL/STATE/LOCAL REGS REGARDING POLLUTION. WASTE MAY BE
HAZARDOUS UNDER RCRA & MUST BE TESTED FOR IGN ITABILITY TO
DETERMINE THE HAZARDOUS WASTE NUMBERS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
B59 S 8 SILVER-BRITE ALUMINUM PAINT
| 64742-47-8
1330-20-7
64742-95-6 |
|
CELITE 501, 503, 522, 596, 597. P/N 9061
| 14464-46-1 |
|
GALLIC ACID POWDER
| 149-91-7 |
|
STARCH POWDER ARROWROOT
| 9005-25-8 |
|
THROMBOSCREEN THROMBOPLASTIN, 176099
| 26628-22-8 |
|
ML-90S
| |
|
ELECTROGRAPHIC PAPER
| |
|
ROCKWELL 555 SEALANT (BULK GRADE)
| 108-32-7 |
|
PA2 FLEXIBLE FOAM ADHESIVE
| 74-87-3 |
|
B59 S2 SILVER-BRITE ALUMINUM PAINT
| 64742-47-8
1330-20-7
64742-94-5
7789-06-2
7440-47-3 |
|
ASBESTOS-FREE CEMENT BOARD
| 65997-15-1
1317-65-3
9004-34-6 |
|
UNI-TILE SEALER PART A
| 1330-20-7
108-10-1
67-63-0 |
|
TAPE HEAD CLEANER, TUCO2
| 76-13-1 |
|
SILICONE FUSER OIL, LPS4X-AC
| |
|
FORMULA 291
| 1310-73-2 |
|
TONER (RICOH LP H-1 TONER) LPS4X-AA, PART
| 1333-86-4 |
|
DEVELOPER (RICOH LP H-1 DEVELOPER), PART B
| 1317-60-8
1314-13-2
1333-86-4 |
|
MITEE CLEAR THREAD CUTTING OIL
| 8012-95-1 |
|
VIDEO SCREEN CLEANER VT1XX-KF
| 7732-18-5
34590-94-8
1336-21-6 |
|
RP 4026 RESIN
| 7429-90-5
1302-78-9
2425-79-8 |
|
RP 4005 RESIN
| 2425-79-8 |
|
RP 4036 RESIN
| 7429-90-5
1317-65-3
2425-79-8
21645-51-2
25068-38-6
28064-14-4
1675-54-3 |
|
HALOCARBON 4.2S OIL
| |
|
RP 6403 HARDENER
| 120-07-0 |
|
RP 6403 RESIN, PART B
| 61788-32-7 |
|
RP 6413 RESIN, PART A
| 5124-30-1
4098-71-9 |
|
RP 6413 HARDENER, PART B
| 101-77-9 |
|
BLACK & WHITE INDICATING STOP BATH
| |
|
NON-SKID PAINT, 7-1182
| 1330-20-7
108-88-3
8030-30-6 |
|
HARD LEAD, ANTIMONIAL OR ARSENICAL ALLOY
| 7439-92-1
7440-36-0
7440-38-2
7440-31-5 |
|
PUROLITE C-100 S ION EXCHANGE RESIN
| |
|
AMMONIUM BIFLUORIDE, 418-002-03
| 1341-49-7 |
|
COATING-CLEAR WATER REPELLENT
| |
|
EPOXY RESIN, #642-644
| |
|
BUFFER SOLUTIONS PH 4.0-4.5/PH 4.36/PH 4.0
| 7732-18-5
50-00-0
64-19-7 |
|
SPEEDBALL, BLACK 4560, 4600, 4610
| |
|
TRANSPARENT-EXTENDER BASE 4532, 4572, 4578
| |
|
BLUE 4542, 4582, 4592 SPEEDBALL INK
| |
|
BLACK 3400, 3500, 3600 & 3700
| |
|
YELLOW 3405/3505/3605/3705 SPEEDBALL INK
| |
|
ORANGE 3407/3507/3607/3707 SPEEDBALL INK
| |
|
GREEN 3404/3504/3604/3704 SPEEDBALL INK
| |
|
RED 3401/3501/3601/3701 SPEEDBALL INK
| |
|
VINYL ATHLETIC COATING
| 108-88-3
78-93-3 |
|
DICK BLICK ADHESIVE, L61 119
| 75-09-2
8030-30-6
75-28-5
74-98-6 |
|
WHITE 3403/3503/3603/3703 SPEEDBALL INK
| |
|
SCULP-METAL MODELING METAL
| 78-93-3 |
|
RP 6422 RESIN
| 5124-30-1
101-68-8 |
|
RP 6422 HARDENER
| 101-77-9
84-74-2 |
|
RP 6402 HARDENER
| 110-63-4 |
|
|