====================== Handling and Storage ======================
Handling and Storage Precautions:TO DETERMINE THE COMPOSITION &
QUANTITY OF FUMES/GASES TAKE AN AIR SAMPLE INSIDE THE WELDER'S LMET
OR IN THE WORKER'S BREATHING OZONE.
Other Precautions:ARC RAYS CAN INJURE EYE & BURN SKIN. ELECTRIC SHOCK
CAN KILL.
Respiratory Protection:AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED
SPACE IF >TLV.
Ventilation:LOCAL EXHAUST AT THE ARC TO KEEP THE FUMES/GASES >TLV'S
Protective Gloves:WELDER'S
Eye Protection:FACESHIELD W/FILTER LENS
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION.
Supplemental Safety and Health
MSDS DATE: 8-85. ALSO CONTAIN: IRON.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
N/R _
Hazardous Decomposition Products:CO, CO2, OZONE, NOX, COMPLEX OF OXIDES
OF FE/MN/SI/TI/MG/N.
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE & LOC AL REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.