===================== Product Identification =====================
MSDS NAME:ZEROLAC
NIIN:00F017045
MSDS Number: BKTYD
=== Responsible Party ===
Company:ZEHRUNG CORPORATION
Address:2201 N W 20TH AVE
City:PORTLAND
State:OR
ZIP:97209
Info Phone Num:(503) 678-5060 OR 222-9691
Emergency Phone Num:(503) 678-5060 OR 222-9691
CAGE:FO864
=== Contractor Identification ===
Company:ZEHRUNG CORP
Address:16416 SW 72ND AVE
Box:City:PORTLAND
State:OR
ZIP:97224
Country:US
Phone:503-684-3136
CAGE:28781
Company:ZEHRUNG CORPORATION
Address:2201 N W 20TH AVE
City:PORTLAND
State:OR
ZIP:97209
Phone:(503) 678-5060 OR 222-9691
CAGE:FO864
============= Composition/Information on Ingredients =============
Name:ETHYL ALCOHOL (ETHANOL)
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: 45%
Other REC Limits:1900 MG/CUM
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM; 9192
Name:DISPERSANTS
Fraction by Wt: 1%
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: <31%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: <31%
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192
Name:SILICA
CAS:7631-89-9
Fraction by Wt: <31%
Name:SHELLAC BLEACHED RESIN
CAS:9000-59-3
Fraction by Wt: 19%
Name:METHYL ALCOHOL (METHANOL) (SARA III)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 4%
Other REC Limits:200 PPM
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: INTOXICATION.
EYES/INGESTION: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: INTOXICATION. EYES/INGESTION:
IRRITATION.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER.
INGESTION: OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:60F
Lower Limits:5%
Upper Limits:19%
Extinguishing Media:USE CO2, DRY CHEMICAL FOR SMALL FIRES. POLYMER FOAM
FOR LARGE FIRES.
================== Accidental Release Measures ==================
Spill Release Procedures:PICK UP W/ABSORBENT MATERIAL BEFORE IS DRY.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, & OPEN
FLAME. USE W/ADEQUATE VENTILATION. AVOID IGNITION OF LIQUID OR
VAPORS.
============= Exposure Controls/Personal Protection =============
Ventilation:LOCAL EXHAUST: PREFERRED
Protective Gloves:AS REQUIRED
Eye Protection:AS REQUIRED
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Spec Gravity:1.17
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE, VISCOUS LIQUID W/ETHANOL ODOR.
Percent Volatiles by Volume:49%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, OR OPEN FLAME.
==================== Disposal Considerations ====================
Waste Disposal Methods:DRIED SPILLS ARE NOT HAZARDOUS & MAY BE DISPOSED
OF IN AN APPROPRIATE LANDFILL IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|