===================== Product Identification =====================
MSDS NAME:236 MOLYBDATE REAGENT SOLUTION
NIIN:00F017059
MSDS Number: BKTYV
=== Responsible Party ===
Company:BETZ LABORATORIES INC
Address:4636 SOMERTON ROAD
City:TREVOSE
State:PA
ZIP:19047
Info Phone Num:(215) 355-3300
Emergency Phone Num:(215) 355-3300
CAGE:24774
=== Contractor Identification ===
Company:BETZDEARBORN INC.
Address:4636 SOMERTON ROAD
Box:City:TREVOSE
State:PA
ZIP:19053
Country:US
Phone:215-355-3300
CAGE:24774
============= Composition/Information on Ingredients =============
Name:SODIUM MOLYBDATE
CAS:7631-95-0
RTECS #:QA5075000
Other REC Limits:5 MG/CUM (MO) MSHA
OSHA PEL:5 MG/CUM (MO)
ACGIH TLV:5 MG/CUM (MO)
Name:SULFURIC ACID (SARA III)
CAS:7664-93-9
RTECS #:WS5600000
Fraction by Wt: 6-10%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, BURNS, TISSUE
ULCERATION/NECROSIS & CORROSIVE. EYES: IRRITATION & CORROSIVE.
INHALATION: UPPER RESPIRATORY TRACT IRRITATION. INGESTION: HARMFUL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION, BURNS, TISSUE
ULCERATION/NECROSIS & CORROSIVE. EYES: IRRITATION & CORROSIVE.
INHALATION: UPPER RESPIRATORY TRACT IRRITATION. INGESTION: HARMFUL.
======================= First Aid Measures =======================
First Aid:SKIN: WASH W/PLENTY OF SOAP SOLUTION OR WATER FOR 15 MINS.
EYES: FLUSH W/WATER FOR 15 MINS. INHALATION: REMOVE TO FRESH AIR.
APPLY NECESSARY FIRST AID TREATMENT. INGESTION: DON'T GIVE ANYTHING
BY MOUT H TO AN UNCONSCIOUS OR CONVULSIVE PERSON. DON'T INDUCE
VOMITING. DILUTE CONTENTS IN STOMACH USING 3-4 GLASSES OF MILK OR
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Extinguishing Media:DRY CHEMICAL, CO2, FOAM, OR WATER.
Fire Fighting Procedures:WEAR POSITIVE PRESSURE SELF-CONTAINED
BREATHING APPARATUS (FULL FACE-PIECE).
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA. USE PROTECTIVE EQUIP.
CONTAIN/ABSORB ON ABSORBENT MATERIAL PLACE IN WASTE DISPOSAL
CONTAINER. FLUSH AREA W/WATER. WET AREA MAY BE SLIPPERY, SPREAD
SAND/GRIT. WASTE CHARACTERISTICS SHOU LD BE DETERMINED IN
ACCORDANCE W/RCRA REGULATIONS.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
PROTECT FROM FREEZING. IF FROZEN, THAW COMPLETELY & MIX THOROUGHLY
PRIOR TO USE. DON'T MIX W/ALKALINE MATERIAL.
Other Precautions:CONTAINS SARA 313 LISTED CHEMICALS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE RESPIRATORS WITHIN USE LIMITATIONS OR USE
SUPPLIED AIR RESPIRATORS. IF VENTILATION IS INADEQUATE OR
SIGNIFICANT REAGENT EXPOSURE IS LIKELY, USE A RESPIRATOR W/DUST OR
MIST FILTERS.
Ventilation:PROVIDE ADEQUATE VENTILATION TO KEEP
Protective Gloves:GAUNTLET-TYPE RUBBER
Eye Protection:SPLASH PROOF CHEMICAL GOGGLES/FACESHIELD
Other Protective Equipment:CHEMICAL RESISTANT APRON
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Spec Gravity:1.066
pH: 0.9
Evaporation Rate & Reference:(ETHER = 1 ): <1
Solubility in Water:100%
Appearance and Odor:COLORLESS LIQUID, NO ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS
Stability Condition to Avoid:FREEZING
Hazardous Decomposition Products:ELEMENTAL OXIDES SUCH AS CO, CO2.
==================== Disposal Considerations ====================
Waste Disposal Methods:SEND CONTAMINATED WATER TO A SANITARY SEWER, IN
ACCORDANCE W/LOCAL REGULATIONS, A TREATMENT FACILITY OR DISCHARGED
UNDER A NPDES PERMIT. REAGENT (AS IS) INCINERATE OR BURY IN
APPROVED LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|