Name:VOC: 5.96 LB/GAL WATER & NEGLIGIBLY PHOTOCHEMICALLY
REACTIVE MATERIALS 715 G/L LESS WATER (CALCULATED)
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE: INGESTION: ASPIRATION OF
MATERIAL INTO LUNG MAY CAUSE CHEMICAL PNEUMONITIS (CAN BE FATAL).
INHAL: CENTRAL NERVOUS SYSTEM DEPRESSION. SKIN: DEFATTING. CHRONIC:
INJURY TO LIVER, KIDNEYS, AND BLOO D, PERMANENT BRAIN AND NERVOUS
SYSTEM DAMAGE. DELIBERATE MISUSE BY CONCENTRATION & INHALATION MAY
BE HARMFUL OR FATAL.*
Explanation of Carcinogenicity:*LAB STUDIES INVOLVING RATS INDICATES
THAT METHYL ISOBUTYL KETONE MAY DAMAGE THE KIDNEYS.
Effects of Overexposure:INGESTION: CAN CAUSE GASTROINTESTINAL
IRRITATION, NAUSEA, AND VOMITING. INHALATION: MAY CAUSE NOSE OR
THROAT IRRITATION, HEADACHES, DIZZINESS, NAUSEA AND CONFUSION. EYE:
IRRITATION. SKIN: IRRITATION.
======================= First Aid Measures =======================
First Aid:INGESTION: DON'T INDUCE VOMITING. CALL POISON CONTROL CENTER,
HOSP EMERGENCY ROOM OR DOCTOR IMMED. INHALATION: REMOVE TO FRESH
AIR. IF BREATHING STOPPED, GIVE ARTIFICIAL RESPIRATION. KEEP WARM &
QUIET . GET MED AID IMMEDIATLY. EYE: FLUSH W/LRG AMTS WATER,
LIFTING UPPER & LOWER LIDS OCCASIONALY--15 MINUTES. GET MED AID.
SKIN: REMOVE CONTAM CLOTHING. WASH W/SOAP & WATER. IRRIT PERSISTS,
GET MED AID.
===================== Fire Fighting Measures =====================
Flash Point:59.0F,15.0C
Autoignition Temp:Autoignition Temp Text:300 C
Lower Limits:1.0 %
Upper Limits:11.0 %
Extinguishing Media:USE NFPA CLASS B(CO2, ALL PURPOSE DRY CHEMICAL OR
ALCOHOL FOAM) FOR LIQUID FIRES. POLYMER FOAM PREFERRED FOR LARGE
FIRES
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, USE TO COOL
CONTAINERS (FOG NOZZLE PREFERABLE) TO PREVENT PRESSURE BUILD-UP &
AUTO-IGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:EMERGENCY CONDITIONS:OVEREXPOSURE TO
DECOMP PRODUCTS MAY CAUSE HEALTH HAZARD. SYMPTOMS MAY NOT BE IMMED
APPARENT. GET MEDICAL AID. VAPORS MAY CAUSE FLASH FIRE.
Spill Release Procedures:NO SPECTATORS. NO IGNITION SOURCES(FLAMES/HOT
SURFACES-ELECTRICAL/STATIC/FRICTIONAL SOURCES & SPARKS). DIKE &
CONTAIN SPILL W/INERT MATR'L(SAND, EARTH). TRANSFER LIQUID TO
COVERED METAL CONTAINERS. PL ACE USED ABSORBENT IN COVERED METAL
CONTAINERS.**
Neutralizing Agent:**PREVENT CONTAM OF SEWERS, STREAMS, & GROUNDWATER
W/SPILLED MATERIAL/ABSORBENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 120F.DO NOT WELD,
BRAZE OR CUT EMPTY CONTAINERS. NEVER USE PRESSURE TO EMPTY. DRUM IS
NOT A PRESSURE VESSEL.
Other Precautions:DON'T TAKE INTERNALLY. KEEP CONTAINERS CLOSED. KEEP
AWAY FROM CHILDREN. DON'T WASH/REUSE EMPTY CONTAINERS. DON'T USE
UNTIL SAFETY/MIXING DIRECTIONS UNDERSTOOD. GROUND & BOND CNTNRS TO
RECEIVING CNTNR.
Respiratory Protection:RESTRICTED VENTILATION USE NIOSH APPROVED
CHEMICAL CARTRIDGE RESPIRATOR. IF SPRAYING--MECHANICAL PREFILTER.
CONFINED AREA--NIOSH/MSHA APPROVED RESPIRATOR W/APPROPRIATE
PROTECTION FACTOR. SEE OSHA 29 C FR 1910.134.
Ventilation:LOCAL VENT--SUFF TO MAINTAIN BELOW NUISANCE DUST LIMITS &
EXPOSURE LIMITS.
Protective Gloves:SOLVENT IMPERMEABLE GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYEWASH FACILITY AND SAFETY SHOWERS
Supplemental Safety and Health
THE CONTENTS OF THIS PACKAGE MUST BE BLENDED WITH OTHER COMPONENTS
BEFORE THE PRODUCT CAN BE USED. ANY MIXTURE OF COMPONENTS WILL HAVE
THE HAZARDS OF ALL COMPONENTS. BEFORE OPENING THE PACKAGES, READ
ALL WARNING LABELS. FOLLOW ALL PRECAUTIONS.
HCC:F2
Boiling Pt:B.P. Text:139 TO 281F
Melt/Freeze Pt:M.P/F.P Text:-50F,-46C
Decomp Temp:Decomp Text:1832F,1000C
Vapor Pres:16MMHG@68F
Vapor Density:HEAVIER*
Spec Gravity:0.9
pH:4-7
Viscosity:<200 CST
Evaporation Rate & Reference:SLOWER THAN DIETHYL ETHER
Solubility in Water:SLIGHT *THAN AIR.
Appearance and Odor:LIQUID; SOLVENT ODOR
Percent Volatiles by Volume:83
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT (>100 F) AND SOURCES
OF IGNITION.
Hazardous Decomposition Products:BURNING (WELDING/CUTTING/ETC) WILL
PRODUCE SMOKE, CARBON MONOXIDE, CARBON DIOXIDE, ALDEHYDES, ACIDS &
OTHER ORGANICS.
Waste Disposal Methods:DISPOSE IN ACCORD W/FED/STATE/LOCAL LAWS.
INCINERATE--EPA PERMITTED FACILITY (D001). DON'T INCINERATE CLOSED
CONTAINERS. OBSERVE PRECAUTIONS FOR DISPOSAL OF FLAMMABLE
MATERIALS. CONTAMINATED ABSORBENT MAY BE DISPOSED IN HAZARDOUS
LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.