===================== Product Identification =====================
MSDS NAME:F.G. BOTTOMKOTE BLACK, 779
NIIN:00N022021
MSDS Number: BLSBP
=== Responsible Party ===
Company:COURTAULDS COATINGS INC
Address:6001 ANTOINE DR
City:HOUSTON
State:TX
ZIP:77210-4806
Country:US
Info Phone Num:201-686-1300
Emergency Phone Num:201-686-1300
CAGE:50411
=== Contractor Identification ===
Company:COURTAULDS COATINGS INC
Address:400 S 13TH STREET
Box:City:LOUISVILLE
State:KY
ZIP:40203-1714
Country:US
Phone:502-588-9651
CAGE:50411
Company:INTERNATIONAL PAINT INC
Address:6001 ANTOINE DR
Box:City:HOUSTON
State:TX
ZIP:77091
Country:US
Phone:800-589-1267/800-854-6813
CAGE:26351
============= Composition/Information on Ingredients =============
Name:COPPER(I) OXIDE
CAS:1317-39-1
RTECS #:GL8050000
Fraction by Wt: 60-65%
OSHA PEL:1.00 MG/M3
ACGIH TLV:1.00 MG/M3
Name:ZINC OXIDE
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: 1-5%
OSHA PEL:15MG/M3 TDUST/5 FUME
ACGIH TLV:10MG/M3 TDUST; 9293
Name:VENT: DURING WELDING OR FLAME CUTTING ON SURFACES COATED
WITH PRODUCT.
RTECS #:9999999ZZ
Name:NAPHTHA, MEDIUM ALIPHATIC. VP: 2.0@20C
CAS:64742-88-7
Fraction by Wt: 5-10%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 1-5%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:VM&P NAPHTHA (LIGROINE)
CAS:8032-32-4
RTECS #:OI6180000
Fraction by Wt: 1-5%
OSHA PEL:300 PPM/400 STEL
ACGIH TLV:300 PPM; 9192
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION, REDNESS, TEARING &
BLURRED VISION. SKIN: IRRITATING. MAY RESULT IN DERMATITIS. HARMFUL
IF ABSORBED THROUGH SKIN. INHAL: SEVERE IRRITATION, DIZZINESS,
POSSIBLE NAUSEA & VOMITING & UNC ONSCIOUSNESS. INGEST:
GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING, DIARRHEA AND
UNCONSCIOUSNESS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CHRONIC OVEREXPOSURE TO, AND MISUSE
OF, SOLVENTS HAS BEEN LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM
DAMAGE. INHALATION OF ZINC FUME MAY PRODUCE SYMPTOMS KNOWN AS FETAL
FEVER. SYMPTOMS USU ALLY DISAPPEAR WITHIN 24 HRS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.
======================= First Aid Measures =======================
Eyes: FLUSH IMMED WITH COPIOUS QUANTITIES OF WATER FOR AT
LEAST 15 MIN. GET MED ATTN IMMED. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH WITH PLENTY OF SOAP AND WATER. LAUNDER CLOTHES
BEFORE REUSE. INHAL: REMOVE TO FRESH AIR. GIVE ARTF RESP IFNEEDED.
GET MED ATTN. INGEST: GET MED ATTN IMMED. DRINK PROMPTLY MILK, EGG
WHITES, GELATIN SOLUTION OR WATER. AVOID ALCOHOL.
===================== Fire Fighting Measures =====================
Flash Point:81.0F,27.2C
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
SMOTHER FLAMES W/1 OF ABOVE EXTING MEDIA. H2O MAY BE USED TO COOL
UNOPENED CONTR, BUT MUST NOT BE(SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS.VENTILATE AREA. CLEANUP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN BLDG DESIGNED & PROTECTED FOR
STOR OF LIQ W/NFPA CLASS GIVEN BY OSHA CLASS. AVOID BRTHG
DUST/CHIPS FROM SAND/ BLAST SURF COATED WITH(SUPDAT)
Other Precautions:THIS MATERIAL IS TOXIC TO FISH IF MISUSED, READ
CONTAINER LABEL BEFORE USE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLICATN. IN RESTRICTED VENT AREAS, USE
NIOSH/MSHA APPRVD RESP I/A/W 29 CFR 1910.13 TO REMOVE(SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGRED BELOW LIM, & TO REMOVE DECOMP PRODUCTS(ING 5)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG/FULL LENGTH FSHLD .
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: USED AS AN EXTING MEDIA. TAKE CARE TO PVNT SPREAD OF
BURN LIQ W/H2O. CLSD CONTR MAY EXPLODE WHEN EXPOSED TO EXTREME
HEAT. HNDLG/STOR PREC: THIS PRODUCT. RECOM GROUND/BOND OF CONTR WHE
N TRANSFERRING LIQ & POWDERS TO AVOID STATIC CHARGE BUILDUP. RESP
PROT: COMBINATION OF PARTICLES AND VAPORS.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:280F,138C
Vapor Pres:SEE INGRED
Vapor Density:>AIR
Spec Gravity:1.77
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:25
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP DRY. STORE AWAY FROM DIRECT HEAT,
FLAME OR SPARK.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
FRAGMENTS, ZINC FUMES, COPPER FUMES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
2-TON CLEAR EPOXY HARDENER, 71722
| 140-31-8
25154-52-3 |
|
RUST PREVENTATIVE, 78609
| 110-54-3
71-55-6
64742-88-7
74-98-6
75-28-5 |
|
KAR STUD TYPE THREAD LOCK, 72917
| 80-15-9
613-48-9
81-07-2
25852-47-5
39382-25-7 |
|
KEX RUB-R-FLUX SILICONE SOAPSTONE REMOVER 7
| 1330-20-7
100-41-4
71-55-6 |
|
ACID CALIBRATION CHECK COMPOUND MIX 1ML, 48
| 120-83-2
88-06-2
59-50-7
88-75-5
87-86-5
108-95-2
75-09-2 |
|
4,4'-DDT 20UG/ML 1ML, 48678
| 50-29-3
67-56-1 |
|
PCB QC CHECK SAMPLE 1242-B 5ML, 48732
| 53469-21-9
64742-46-7
64742-53-6
128-37-0 |
|
PCB QC CHECK SAMPLE 1254-B 5ML, 48734
| 64742-46-7
64742-53-6
128-37-0
11097-69-1 |
|
PCB QC CHECK SAMPLE 1260-B 5MLL, 48736
| 64742-46-7
64742-53-6
128-37-0
11096-82-5 |
|
ACIDS SURROGATE STD MIX 1ML, 48875
| 67-56-1
13127-88-3
118-79-6
367-12-4 |
|
ACIDS SPIKING SOLUTION 2 MG/ML, 48878
| 59-50-7
95-57-8
100-02-7
87-86-5
108-95-2
67-56-1 |
|
INTERZINC 75 EPOXY PRIMER REACTOR, EPA076
| 71-36-3
1330-20-7
54742-95-6
107-98-2
68410-23-1 |
|
INTERZINC 75 EPOXY PRIMER RED, EPA075
| 25068-38-6
71-36-3
1330-20-7
64742-95-6
7440-66-6
1314-13-2
7439-92-1 |
|
INTERSHIELD CURING AGENT REACTOR, EGA781
| 71-36-3
64742-95-6
110-43-0 |
|
INTERSHIELD PINK PRIMER BASE, EGA780
| 71-36-3
1330-20-7
64742-95-6
25036-25-3
25068-38-6 |
|
FLATTING AND REDUCING COMPOUND, T1 F 278
| 108-88-3
100-41-4
1330-20-7
78-83-1
78-93-3
112-07-2
14807-96-6 |
|
NICKEL MACHINEABLE 50
| 13770-89-3
7773-06-0
14017-41-5 |
|
II-B OFFSET INK NON-OXIDIZING
| 64742-46-7 |
|
PH PLUS
| 497-19-8 |
|
NO RUST 1000 HAZE GRAY, F-22P37
| 64742-48-9
71-36-3 |
|
CALSOFT LAS-99
| |
|
FORM 4 ALKYD BASED PAINTS CONTAINING LEAD
| 64742-88-7
7758-97-6 |
|
FJT-21
| 9003-07-4
1309-38-2 |
|
FFC-451
| 1309-37-1
1314-13-2
1317-38-0
1313-99-1 |
|
25-20M GREASE
| 9002-83-9 |
|
1.8 OIL
| 9002-83-9 |
|
ACRY-LUSTRE ACRYLIC SEMI-GLOSS, 1250-SERIES
| 25265-77-4
107-41-5 |
|
ACRY-SHIELD ACRYLIC FLAT FINISH, 1240-SERIE
| 107-21-1
25265-77-4 |
|
SUPER BOTTOMKOTE BLACK, 457
| 1330-20-7
8032-32-4
64742-88-7
1317-39-1
1314-13-2 |
|
F.G. BOTTOMKOTE BLACK, 779
| 1317-39-1
1314-13-2
64742-88-7
1330-20-7
8032-32-4 |
|
CLASSIC YACHT 625 CLEAR
| 108-65-6
110-43-0
2155-70-6
8030-30-6
64742-95-6
71-36-3
95-63-6 |
|
SODIUM BISULFITE SOLUTION
| 7631-90-5 |
|
SILIFLAM
| 78-10-4 |
|
TKO-19
| |
|
SPRAY CLEANER AND DEGREASER
| 1310-73-2
111-76-2
1344-09-8
26027-38-3 |
|
76 74384 PTC BURNT UMBER
| 9016-45-9
9014-92-0
12713-03-0
14807-96-6
107-21-1
111-46-6 |
|
76 74383 PTC RAW UMBER
| 14807-96-6
12713-03-0
107-21-1
111-46-6
9014-92-0 |
|
76 74393 PTC LAMP BLACK
| 9014-92-0
14807-96-6
1333-86-4
107-21-1
111-46-6 |
|
AROCLOR 1242 1UG/UL 1ML, 44806
| 53469-21-9
540-81-1 |
|
HI-STRENGTH RESIN, 10680
| 100-42-5 |
|
HI-STRENGTH RESIN, 10136
| 100-42-5 |
|
HI-STRENGTH RESIN, 10032
| 100-42-5 |
|
HI-STRENGTH RESIN, 10016
| 100-42-5 |
|
PREPARED TUBED & MYCOFLASK MEDIA-CLASSIFIED
| |
|
PREPARED PLATED MEDIA CONT HUMAN BLOOD, (SU
| |
|
PREPARED PLATED MEDIA CLASSIFIED AS (SUPP D
| |
|
PHENOL REAGENT
| 7757-82-6
68258-97-9 |
|
PHENOL 2 REAGENT, 1836
| 13746-66-2
7778-80-5 |
|
MBTH REAGENT, 22571
| 4338-98-1
7647-14-5 |
|
IODATE-IOSIDE STANDARD SOLUTION 0.0012GN,40
| 7732-13-5 |
|
|