===================== Product Identification =====================
MSDS NAME:INTERZINC 75 EPOXY PRIMER RED, EPA075
NIIN:00N021859
MSDS Number: BLRZP
=== Responsible Party ===
Company:INTERNATIONAL PAINT (USA) INC
Address:2270 MORRIS AVE
Box:386
City:UNION
State:NJ
ZIP:07083
Country:US
Info Phone Num:713-682-1711
Emergency Phone Num:713-682-1711
CAGE:26351
=== Contractor Identification ===
Company:INTERNATIONAL PAINT INC
Address:6001 ANTOINE DR
Box:City:HOUSTON
State:TX
ZIP:77091
Country:US
Phone:800-589-1267/800-854-6813
CAGE:26351
============= Composition/Information on Ingredients =============
Name:VENT: PRODS DURING WELDING/FLAME CUTTING ON SURF COATED
WITH THIS PRODUCT.
RTECS #:9999999ZZ
Name:RESP PROT: REMOVE A COMBINATION OF PARTICULATES AND VAPORS.
RTECS #:9999999ZZ
Name:EPOXY RESIN
CAS:25068-38-6
RTECS #:KC2100000
Fraction by Wt: 5-10%
Name:N-BUTYL ALCOHOL (SARA III)
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 1-5%
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 1-5%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:NAPHTHA, LIGHT AROMATIC. VP: 10
CAS:64742-95-6
Fraction by Wt: 5-10%
ACGIH TLV:500 PPM (MFR)
Name:ZINC (SARA III)
CAS:7440-66-6
RTECS #:ZG8600000
Fraction by Wt: 45-50%
OSHA PEL:10 MG ZNO/M3
ACGIH TLV:10 MG ZNO/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ZINC OXIDE
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: 5-10%
OSHA PEL:15MG/M3 TDUST/5 FUME
ACGIH TLV:10MG/M3 TDUST; 9293
Name:LEAD (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 0.077%
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRIT, REDNESS, TEARING &
BLURRED VISION. SKIN: IRRITATING. MAY RESULT IN DERMATITIS. MAY
CAUSE SENSITIZATION/OTHER ALLERGIC RESPONSES. INHAL: IRRITATION OF
RESP TRACT. HEADACHE AND DIZZI NESS AND UNCON. INGEST: GI
IRRITATION, NAUSEA, VOMITING, DIARRHEA. CHRONIC OVEREXP TO, AND
MISUSE (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: OF, SOLV HAS BEEN LINKED TO PERM
BRAIN & NERV SYSTEM DMG. INHAL OF ZINC FUME MAY PRODUCE SYMP KNOWN
AS METAL FEVER. SYMP USUALLY DISAPPEAR WITHIN 24 HRS. AS NOTED IN
THE OSHA LEAD STANDARD, REPEATED AND PROLONGED EXPOSURE MAY CAUSE
DELAYED EFFECTS INVOLVING THE BLOOD, GI, NERVOUS & REPRO SYSTEMS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.
======================= First Aid Measures =======================
Eyes: FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
AT LEAST 15 MIN. GET MD IMMEDIATELY. SKIN: REMOVE CONTAMINATED
CLOTHING, WASH SKIN WITH PLENTY OF SOAP AND WATER. LAUNDER CLOTHES
BEFORE RE USE. INHAL: REMOVE TO FRESH AIR. GIVE ARTIFICIAL
RESPIRATION IF NEEDED. GET MD. INGEST: CALL MD IMMEDIATELY TO
DETERMINE WHETHER OR NOT TO INDUCE VOMITING.
===================== Fire Fighting Measures =====================
Flash Point:84.0F,28.9C
Lower Limits:0.9%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SMOTHER FLAMES W/ONE OF ABOVE EXTING MEDIA. WATER MAY BE USED TO
COOL UNOPENED CNTNRS, BUT (SUPP DATA)
Unusual Fire/Explosion Hazard:NONE KNOWN UNLESS OTHERWISE NOTED.
CONTAINS FLAM SOLV. DO NOT USE IN AREAS WHERE SPARK/OPEN FLAME ARE
PRESENT. DRY ZINC DUST FORMS EXPLO MIXT W/AIR. (SUPP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN BLDG DESIGNED & PROTECTED FOR
STOR OF LIQ W/NFPA CLASS GIVEN BY OSHA CLASS.AVOID BRTHG DUST/CHIPS
FROM SANDING/BLASTING SURF COATED W/PROD.
Other Precautions:RECOMMEND GROUNDING AND BONDING OF CONTAINERS WHEN
TRANSFERRING LIQUIDS AND POWDERS TO AVOID STATIC CHARGE BUILDUP.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
A NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES
OF OVERSPRAY DURING SPRAY APPLICATN. IN RESTRICTED VENT AREAS, USE
NIOSH/MSHA APPRVD RESP I/A/W 29CFR 1910.134 TO (SEE ING 9)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOLUME & PATTERN, TO KEEP TLV &
LEL OF HAZ INGREDS
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:MUST NOT BE USED AS EXTING MEDIA. TAKE CARE TO PVNT
SPREAD OF BURNING LIQ W/WATER. CLSD CNTNRS MAY EXPLODE WHEN EXPSD
TO EXTREME HEAT. WATER MAY BE USED TO COOL UNOPENED CNTNRS. EXPLO
HAZ:MAY YIELD EXPLO HYDROGEN GAS IN PRESENCE OF MOISTURE,
ALKALI/ACID. EXPLO MAY OCCUR IF CONTAM W/STRONG OXIDING AGENT.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:244F,118C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:16(WT)
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE KNOWN UNLESS OTHERWISE NOTED. MOISTURE.
Stability Condition to Avoid:NONE KNOWN UNLESS OTHERWISE NOTED. KEEP
DRY.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
FRAGMENTS, ALDEHYDES, ZINC FUMES, LEAD FUMES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
2-TON CLEAR EPOXY HARDENER, 71722
| 140-31-8
25154-52-3 |
|
RUST PREVENTATIVE, 78609
| 110-54-3
71-55-6
64742-88-7
74-98-6
75-28-5 |
|
KAR STUD TYPE THREAD LOCK, 72917
| 80-15-9
613-48-9
81-07-2
25852-47-5
39382-25-7 |
|
KEX RUB-R-FLUX SILICONE SOAPSTONE REMOVER 7
| 1330-20-7
100-41-4
71-55-6 |
|
ACID CALIBRATION CHECK COMPOUND MIX 1ML, 48
| 120-83-2
88-06-2
59-50-7
88-75-5
87-86-5
108-95-2
75-09-2 |
|
4,4'-DDT 20UG/ML 1ML, 48678
| 50-29-3
67-56-1 |
|
PCB QC CHECK SAMPLE 1242-B 5ML, 48732
| 53469-21-9
64742-46-7
64742-53-6
128-37-0 |
|
PCB QC CHECK SAMPLE 1254-B 5ML, 48734
| 64742-46-7
64742-53-6
128-37-0
11097-69-1 |
|
PCB QC CHECK SAMPLE 1260-B 5MLL, 48736
| 64742-46-7
64742-53-6
128-37-0
11096-82-5 |
|
ACIDS SURROGATE STD MIX 1ML, 48875
| 67-56-1
13127-88-3
118-79-6
367-12-4 |
|
ACIDS SPIKING SOLUTION 2 MG/ML, 48878
| 59-50-7
95-57-8
100-02-7
87-86-5
108-95-2
67-56-1 |
|
INTERZINC 75 EPOXY PRIMER REACTOR, EPA076
| 71-36-3
1330-20-7
54742-95-6
107-98-2
68410-23-1 |
|
INTERZINC 75 EPOXY PRIMER RED, EPA075
| 25068-38-6
71-36-3
1330-20-7
64742-95-6
7440-66-6
1314-13-2
7439-92-1 |
|
INTERSHIELD CURING AGENT REACTOR, EGA781
| 71-36-3
64742-95-6
110-43-0 |
|
INTERSHIELD PINK PRIMER BASE, EGA780
| 71-36-3
1330-20-7
64742-95-6
25036-25-3
25068-38-6 |
|
FLATTING AND REDUCING COMPOUND, T1 F 278
| 108-88-3
100-41-4
1330-20-7
78-83-1
78-93-3
112-07-2
14807-96-6 |
|
NICKEL MACHINEABLE 50
| 13770-89-3
7773-06-0
14017-41-5 |
|
II-B OFFSET INK NON-OXIDIZING
| 64742-46-7 |
|
PH PLUS
| 497-19-8 |
|
NO RUST 1000 HAZE GRAY, F-22P37
| 64742-48-9
71-36-3 |
|
CALSOFT LAS-99
| |
|
FORM 4 ALKYD BASED PAINTS CONTAINING LEAD
| 64742-88-7
7758-97-6 |
|
FJT-21
| 9003-07-4
1309-38-2 |
|
FFC-451
| 1309-37-1
1314-13-2
1317-38-0
1313-99-1 |
|
25-20M GREASE
| 9002-83-9 |
|
1.8 OIL
| 9002-83-9 |
|
ACRY-LUSTRE ACRYLIC SEMI-GLOSS, 1250-SERIES
| 25265-77-4
107-41-5 |
|
ACRY-SHIELD ACRYLIC FLAT FINISH, 1240-SERIE
| 107-21-1
25265-77-4 |
|
SUPER BOTTOMKOTE BLACK, 457
| 1330-20-7
8032-32-4
64742-88-7
1317-39-1
1314-13-2 |
|
F.G. BOTTOMKOTE BLACK, 779
| 1317-39-1
1314-13-2
64742-88-7
1330-20-7
8032-32-4 |
|
CLASSIC YACHT 625 CLEAR
| 108-65-6
110-43-0
2155-70-6
8030-30-6
64742-95-6
71-36-3
95-63-6 |
|
SODIUM BISULFITE SOLUTION
| 7631-90-5 |
|
SILIFLAM
| 78-10-4 |
|
TKO-19
| |
|
SPRAY CLEANER AND DEGREASER
| 1310-73-2
111-76-2
1344-09-8
26027-38-3 |
|
76 74384 PTC BURNT UMBER
| 9016-45-9
9014-92-0
12713-03-0
14807-96-6
107-21-1
111-46-6 |
|
76 74383 PTC RAW UMBER
| 14807-96-6
12713-03-0
107-21-1
111-46-6
9014-92-0 |
|
76 74393 PTC LAMP BLACK
| 9014-92-0
14807-96-6
1333-86-4
107-21-1
111-46-6 |
|
AROCLOR 1242 1UG/UL 1ML, 44806
| 53469-21-9
540-81-1 |
|
HI-STRENGTH RESIN, 10680
| 100-42-5 |
|
HI-STRENGTH RESIN, 10136
| 100-42-5 |
|
HI-STRENGTH RESIN, 10032
| 100-42-5 |
|
HI-STRENGTH RESIN, 10016
| 100-42-5 |
|
PREPARED TUBED & MYCOFLASK MEDIA-CLASSIFIED
| |
|
PREPARED PLATED MEDIA CONT HUMAN BLOOD, (SU
| |
|
PREPARED PLATED MEDIA CLASSIFIED AS (SUPP D
| |
|
PHENOL REAGENT
| 7757-82-6
68258-97-9 |
|
PHENOL 2 REAGENT, 1836
| 13746-66-2
7778-80-5 |
|
MBTH REAGENT, 22571
| 4338-98-1
7647-14-5 |
|
IODATE-IOSIDE STANDARD SOLUTION 0.0012GN,40
| 7732-13-5 |
|
|