Search   
MSDS  : BOAT YARD RESIN
CAS  : 100-42-5
NAME  : styrene;(styrene, monomer)
spill proc:salvage tank. remaining liq may be taken up on
ing 2:shoveled into containers.
===================== Product Identification =====================

MSDS NAME:BOAT YARD RESIN
NIIN:00N025565
Kit Part:Y
MSDS Number: BMCNY
=== Responsible Party ===
Company:CLEAR COAT CORP
Address:2424 22ND ST NO
City:ST PETERSBURG
State:FL
ZIP:33713
Country:US
Info Phone Num:813-822-4677
Emergency Phone Num:813-822-4677
CAGE:CLC0A
=== Contractor Identification ===
Company:CLEAR COAT CORP
Address:2424 22ND ST NO
Box:City:ST PETERSBURG
State:FL
ZIP:33713
Country:US
Phone:813-822-4677
CAGE:CLC0A

============= Composition/Information on Ingredients =============

Name:STYRENE;(STYRENE, MONOMER)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 50%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:SPILL PROC:SALVAGE TANK. REMAINING LIQ MAY BE TAKEN UP ON
SAND/CLAY/EARTH/FLOOR ABSORB/OTHER ABSORB MATL & (ING 3)
RTECS #:9999999ZZ

Name:ING 2:SHOVELED INTO CONTAINERS.
RTECS #:9999999ZZ

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN:PROLONGED/REPEATED CONTACT CAN
CAUSE MODERATE IRRIT, DEFATTING, DERM. INHAL:EXCESS INHAL OF VAP
CAN CAUSE NASAL & RESP IRRIT, DIZZ, WEAK, FATIGUE, NAUS, HEADACHE,
POSS UNCONSCIOUSNESS, ASPHYXIATI ON. INGEST:CAN CAUSE GI
IRRITATION, NAUSEA, VOMITING, AND DIARRHEA. REPORTS HAVE ASSOC
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE MONOMER:GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ:RPTD & PRLNGD OVEREXPOS TO SOLV W/PERM
BRAIN & NERVOUS SYS DAM-INTENTIONAL MISUSE BY DELIBERATELY CONC &
INHAL CONTENTS MAY BE HARMFUL/FATAL. CHRONIC:VARIOUS STUDIES HAVE
SHOWN POSS OVEREXPOS TO THIS PROD W/FOLLOWING DAMAGE:KIDNEY,
LIVER, AND IARC HAS CLASSIFIED STYRENE POSSIBLE HUMAN CARCINOGEN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

======================= First Aid Measures =======================

First Aid:SKIN:THORO WASH EXPOS AREA W/SOAP & WATER. REMOVE CONTAM
CLTHG. LAUNDER CONTAM CLTHG BEFORE RE-USE. EYE:FLUSH W/LG AMTS OF
WATER FOR AT LEAST 15 MIN, LIFTING UPPER & LOWER LIDS OCCASNLY, GET
MD ATTEN. INGEST:DO NOT INDUCE VOM CALL MD/TRANSPORT TO AN
EMERGENCY FACILITY. INHAL:IF AFFECTED, REMOVE INDIVIDUAL TO FRESH
AIR. IF BRTHG IS DIFF, ADMIN OXYGEN. IF BRTHG HAS STOPPED GIVE ARTF
RESP.(SUPP DATA)

===================== Fire Fighting Measures =====================

Flash Point Method:TCC
Flash Point:89.0F,31.7C
Extinguishing Media:WATER FOG OR CARBON DIOXIDE OR DRY CHEMICAL
Fire Fighting Procedures:NIOSH/MSHA APPROVED SCBA WITH A FULL FACE
PIECE OPERATED IN PRESSURE DEMAND OR OTHER POSITIVE PRESSURE MODE
AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:VAP ARE HEAVIER THAN AIR & MAY TRAVEL
ALONG GROUND OR MAY BE MOVED BY VENT AND IGNITED BY PILOT LIGHTS,
OTHER FLAMES, SPARKS, HEATERS, SMOKING (SUPP DATA)

================== Accidental Release Measures ==================

Spill Release Procedures:ELIMINATE ALL IGNIT SOURCES (FLARES, FLAMES
INCLUDING PILOT LIGHTS, ELECTRICAL SPARKS). PERSONS NOT WEARING
PROT EQUIP SHOULD BE EXCLUDED FROM AREA OF SPILL UNTIL CLEAN-UP HAS
BEEN COMPLETED. STOP SPI LL AT SOURCE, DIKE AREA OF SPILL TO
(INGRED 2)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:CONTAINERS OF THIS MATERIAL MAY BE
HAZARDOUS WHEN EMPTIED. SINCE EMPTIED CONTAINERS RETAIN PRODUCT
RESIDUES (VAPORS, LIQUID, AND/OR SOLID).
Other Precautions:ALL HAZARD PRECAUTIONS GIVEN IN THIS DATA SHEET MUST
BE OBSERVED.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:IF TLV OF PROD OR ANY COMPONENT IS EXCEEDED, A
NIOSH/MSHA APPROVED SCBA WITH A FULL FACE PIECE OPERATED IN
PRESSURE DEMAND OR OTHER POSITIVE PRESSURE MODE IS ADVISED:
HOWEVER, OSHA REGULATIONS ALSO P ERMIT OTHER NIOSH/MSHA RESP (SUPP
DATA)
Ventilation:PROVIDE SUFFICIENT MECH (GEN) AND/OR LOCAL EXHAUST VENT TO
MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:TO PREVENT REPEATED OR PROLONGED SKIN
CONTACT, WEAR IMPERVIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:ELECTRIC MOTORS/OTHER IGNIT SOURCES AT LOCATION DISTANT FROM
MATL HANDLING POINT. NEVER USE WELDING AS CUTTING TORCH ON/NEAR
DRUM (EVEN EMPTY) BECAUSE PROD (EVEN JUST RESIDUE) CAN IGNITE EXP
LOS. FIRST AID:KEEP PERSON WARM, QUIET,& GET MD ATTEN. RESP
PROT:UNDER SPECIFIED CONDITION. (SEE YOUR SAFETY SUPPLIER).

================== Physical/Chemical Properties ==================

HCC:F4
Boiling Pt:B.P. Text:295F,146C
Vapor Density:HVR/AIR
Spec Gravity:1.10
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:50%

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENT, STRONG ALKALIES, STRONG MINERAL ACIDS.
Stability Condition to Avoid:HEAT AND DIRECT SUNLIGHT.
Hazardous Decomposition Products:IRRITATING FUMES

==================== Disposal Considerations ====================

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
LOCAL, STATE, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
ARID FOAM 107-98-2
CLEAR COAT POLYESTER ACTIVATOR, METHYL (ING 1338-23-4
131-11-3
BOAT YARD RESIN 100-42-5
SCRUBBING BUBBLES DISINFECTANT BATHROOM (SU 75-28-5
5596-06-9
112-34-5
64-02-8
1346 PROKRETE PENETRATING SEALER 10% & 20% 64475-85-0
123-42-2
67-56-1
4057 PROPATCH ALL PURPOSE 1344-95-2
#11 ADHESIVE 75-09-2
108-88-3
69442-36-4
INTERNATIONAL COMPOUND #2, IC-2 143-18-0
POTASSIUM HEXFLUOROPHOSPHATE, KPF*6, 44008 17084-13-8
7789-23-3
HVI 150 BRIGHT STOCK, 68100 64742-57-0
RESOL 1-1-1 TRICHLOROETHANE, 04580 71-55-6
PHILLYCLAD 6470 RESIN 25068-38-6
13463-67-7
1332-58-7
PHILLYCLAD 6470 HARDENER 68410-23-1
98-00-0
1332-58-7
112945-52-5
UV TREATMENT SOLUTION
PREVENT P3 106-97-8
74-98-6
71-55-6
123-91-1
8052-41-3
8012-95-1
107-98-2
BENTONE SD2 RHEOLOGICAL ADDITIVE, 32138 14808-60-7
14464-46-1
COPPER/COPPER ALLOYS PHOSPHOR BRONZE E, C50 7440-50-8
7440-31-5
7723-14-0
COPPER/COPPER ALLOYS PHOSPHOR BRONZE A, C51 7440-50-8
7440-31-5
7723-14-0
COPPER/COPPER ALLOYS PHOSPHOR BRONZE, C5110 7440-50-8
7440-31-5
7723-14-0
FRO460-FRO477
FORMED MOLECULAR SIEVE, SZ-9 1344-00-9
1344-01-0
12736-96-8
1332-58-7
FORMED MOLECULAR SIEVE, PSE 1344-00-9
1344-01-0
12736-96-8
1332-58-7
FORMED MOLECULAR SIEVE, IGE 1344-00-9
1344-01-0
12736-96-8
1332-58-7
FORMED MOLECULAR SIEVE, WZ-10 1344-00-9
1344-01-0
12736-96-8
1332-58-7
GFO FIBER
P-158 GFO
WIPEOUT 111-30-8
LECTRO SAF BULK, 02837 71-55-6
78-92-2
CERAMIC CONDITIONER BASE, 4001/1074/01 25068-38-6
108-65-6
1330-20-7
13463-67-7
111-15-9
CERAMIC CONDITIONER SOLIDIFIER, 4201/213 584-84-9
108-65-6
1330-20-7
COPPER/COPPER ALLOYS ALUMINIM BRASS-ARSENIC 7440-50-8
1314-13-2
7440-38-2
7429-90-5
COPPER/COPPER ALLOYS CUPRO NICKEL 10%, C706 7440-50-8
7439-96-5
1309-37-1
7440-02-0
LIQUITEX ACRYLIC ARTIST COLOR 2 OZ JAR: (SU 13463-67-7
7631-86-9
LIQUITEX ACRYLIC ARTIST COLOR 8 OZ JAR: (SU 13463-67-7
7631-86-9
LIQUITEX ACRYLIC ARTIST COLOR 16 OZ JAR:(SU 13463-67-7
7631-86-9
LIQUITEX ACRYLIC ARTIST COLOR 32 OZ JAR:(SU 7631-86-9
13463-67-7
LIQUITEX ACRYLIC ARTIST COLOR 2 OZ TUBE:(SU 13463-67-7
7631-86-9
GLID-GUARD COAL TAR EPOXY 5270 SERIES, 5270 68410-23-1
1330-20-7
8007-45-2
14807-96-6
7631-86-9
1569-01-3
90-72-2
GLID-GUARD COAL TAR EPOXY 5270 SERIES, 5271 25068-38-6
GLID-GUARD COAL TAR EPOXY 5270 SERIES, 5272 1330-20-7
872-50-4
GLID-GUARD COAL TAR EPOXY 5270 SERIES, 5273 68410-23-1
90-72-2
1330-20-7
8007-45-2
14807-96-6
7631-86-9
1569-01-3
GLID-GUARD COAL TAR EPOXY 5270 SERIES, 5274 1330-20-7
8007-45-2
14807-96-6
7631-86-9
1569-01-3
25068-38-6
SPRED FLOOR OIL/ALKYD ENAMEL NO 841 SERIES, 64742-47-8
14807-96-6
1309-37-1
100-41-4
SPRED FLOOR OIL/ALKYD ENAMEL NO 841 SERIES, 64742-47-8
13463-67-7
14807-96-6
51274-00-1
100-41-4
SPRED FLOOR OIL/ALKYD ENAMEL NO 841 SERIES, 64742-47-8
13463-67-7
14807-96-6
100-41-4
SPRED FLOOR OIL/ALKYD ENAMEL NO 841 SERIES, 51274-00-1
1333-86-4
100-41-4
1309-37-1
64742-47-8
13463-67-7
14807-96-6
5018/5028/5034 BLACK DRY INK/BLACK TONER/CO 1333-86-4
3843-16-1
8050-09-7
9003-55-8
7439-89-6
1309-37-1
5018/5028/5034 BLACK DRY INK/BLACK TONER/CO 9003-55-8
7439-89-6
1309-37-1
8050-09-7
1333-86-4
3843-16-1
5018/5028/5034 BLACK DRY INK/BLACK TONER/CO 9003-55-8
7439-89-6
1309-37-1
8050-09-7
1333-86-4
3843-16-1
5018/5028/5034 BLACK DRY INK/BLACK TONER/CO 9003-55-8
7439-89-6
1309-37-1
8050-09-7
1333-86-4
3843-16-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net