===================== Product Identification =====================
MSDS NAME:SPRED FLOOR OIL/ALKYD ENAMEL NO 841 SERIES,
NIIN:00N025817
MSDS Number: BMCRC
=== Responsible Party ===
Company:GLIDDEN CO
Address:925 EUCLID AVE
City:CLEVELAND
State:OH
ZIP:44115
Country:US
Info Phone Num:216-826-5566
Emergency Phone Num:216-826-5566
CAGE:72818
=== Contractor Identification ===
Company:GLIDDEN CO MEMBER OF ICI WORLD PAINTS
Address:925 EUCLID AVE
Box:15049
City:CLEVELAND
State:OH
ZIP:44115
Country:US
Phone:216-344-8000
CAGE:72818
============= Composition/Information on Ingredients =============
Name:HYDROTREATED LIGHT PETROLEUM DISTILLATE. VP: 2 @ 68F. LEL:
0.7
CAS:64742-47-8
Fraction by Wt: 36-41%
OSHA PEL:100 PPM (MFR)
ACGIH TLV:100 PPM (MFR)
Name:ALKYD RESIN. MFR CAS NO: 6770-92-9.
Fraction by Wt: 39-44%
Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM
SILICATE HYDRATE)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 6-11%
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST
Name:IRON (III) OXIDE
CAS:1309-37-1
RTECS #:NO7400000
Fraction by Wt: 4-9%
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5 MG/M3(FE),B2; 9293
Name:BENZENE, ETHYL-; (ETHYLBENZENE). VP: 7.1 @ 68F, LEL: 1.0.
CAS:100-41-4
RTECS #:DA0700000
Fraction by Wt: 1-5%
OSHA PEL:100 PPM;125 PPM STEL
ACGIH TLV:100 PPM;125 PPM STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:OTHER PREC:SANDING DUST.EMPTY CNTNRS MAY CONTAIN HAZ
RESIDUES.GROUND EQUIP WHEN TRANSFER TO PVNT ACCUM OF STATIC CHARGE.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: IRRIT OF RESP TRACT. PRLNGD
INHAL MAY LEAD TO FATG, DROWS, DIZZ AND/OR LIGHTHEADEDNESS, HDCH,
UNCOORD, NAUS, CNS DEPRESS, ANESTH EFT/NARCOSIS. SKIN: IRRIT OF
SKIN. PRLNGD/RPTD CONT CAN CAUSE DE RMAT, DEFAT. EYE: IRRIT OF
EYES. PRLNGD/RPTD CONT CAN CAUSE BLURRED VISION, TEARING OF EYES,
REDNESS, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: OF EYES, SEVERE EYE IRRIT. INGEST:
AMTS INGESTED INCIDENTAL TO CONSUMER & INDUSTRIAL HNDLG ARE NOT
LIKELY TO CAUSE INJURY; HOWEVER, INGEST OF LRG AMTS MAY CAUSE LUNG
INFLAM & DMG DUE TO ASPI R OF MATL IN LUNGS. NOTICE: RPTS HAVE
ASSOC RPTD & PRLNGD OCCUP OVEREXP TO SOLV W/PERM BRAIN & NERV SYS
DMG.(SUPP DATA)
Medical Cond Aggravated by Exposure:PREEXISTING EYE, SKIN, RESP
DISORDERS, LUNG DISORDERS, ASTHMA-LIKE CONDITIONS.
======================= First Aid Measures =======================
First Aid:INHAL: REMOVE TO FRESH AIR. RESTORE & SUPPORT CONTINUED
BRTHG. GET MD. HAVE TRAINED PERSON GIVE OXYGEN IF NEC. GET MD FOR
ANY BRTHG DFCLT. SKIN: WASH OFF QUICKLY W/PLENTY OF WATER, THEN
SOAP & WATER; REMOVE CONTAM CLTHG. WASH CONTAM CLTHG BEFORE REUSE.
EYE: FLUSH IMMED W/LRG AMTS OF WATER, ESP UNDER LIDS, FOR AT LEAST
15 MINUTES. CALL MD. INGEST: IF SWALLOWED, CALL MD IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point:105F,41C
Lower Limits:0.7%
Extinguishing Media:DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . WATER MAY BE USED TO COOL AND PROTECT
EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLSD CNTNRS MAY EXPLD WHEN EXPSD TO
EXTREME HEAT/FIRE.VAPS CAN FORM EXPLO MIXT IN AIR AT ELEVATED
TEMPS.MAY DECOMPOSE UNDER FIRE CNDTNS EMIT IRRIT AND/TOX GAS.
================== Accidental Release Measures ==================
Spill Release Procedures:COMPLY WITH ALL APPLICABLE HEALTH AND
ENVIRONMENTAL REGULATIONS. ELIMINATE ALL SOURCES OF IGNITION.
VENTILATE AREA. SPILLS MAY BE COLLECTED WITH NON-COMBUSTIBLE
ABSORBENT MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 100F. KEEP AWAY FROM HEAT,
SPARKS, AND OPEN FLAME.
Other Precautions:USE ONLY W/ADEQ VENT. DO NOT TAKE INTERNALLY. KEEP
OUT OF REACH OF CHILDREN. AVOID CONT W/SKIN, EYES & BRTHG OF VAPS.
KEEP CNTNRS TIGHTLY CLSD & UPRIGHT WHEN NOT IN USE. IF SANDING IS
DONE, WEAR A DUS T MASK TO AVOID BRTHG OF (ING 6)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:CONTROL ENVIRONMENTAL CONCENTRATIONS BELOW
APPLICABLE STANDARDS. WHERE RESPIRATORY PROTECTION IS REQUIRED, USE
ONLY NIOSH/MSHA APPROVED RESPIRATORS IN ACCORDANCE WITH OSHA
STANDARD 29 CFR 1910.134.
Ventilation:PROVIDE DILUTION VENTILATION OR LOCAL EXHAUST TO PREVENT
BUILD-UP OF VAPORS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH & SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING,
ESPECIALLY BEFORE EATING OR SMOKING.
Supplemental Safety and Health
EFTS OF OVEREXP: INTENTIONAL MISUSE BY DELIBERATELY CONC & INHALING
CONTENTS MAY BE HARMFUL/FATAL. EXPOS TO MATLS IN PROD HAVE BEEN
ASSOC W/POSS BLOOD ABNORMALITIES, LIVER DMG, KIDNEY DMG. EXCESS
INHA L OF SOLV VAPS UNDER UNCONTROLLED CNDTNS MAY LEAD TO UNCON,
RESP FAILURE, ASPHY & EVEN DEATH.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>273F,134C
Vapor Pres:SEE INGRED
Spec Gravity:1.03
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:54.1
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZERS, ACIDS, BASES, AMINES.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:CO, CO*2.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
REGULATIONS. AVOID DISCHARGE TO NATURAL WATERS. DISPOSAL MUST BE IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ARID FOAM
| 107-98-2 |
|
CLEAR COAT POLYESTER ACTIVATOR, METHYL (ING
| 1338-23-4
131-11-3 |
|
BOAT YARD RESIN
| 100-42-5 |
|
SCRUBBING BUBBLES DISINFECTANT BATHROOM (SU
| 75-28-5
5596-06-9
112-34-5
64-02-8 |
|
1346 PROKRETE PENETRATING SEALER 10% & 20%
| 64475-85-0
123-42-2
67-56-1 |
|
4057 PROPATCH ALL PURPOSE
| 1344-95-2 |
|
#11 ADHESIVE
| 75-09-2
108-88-3
69442-36-4 |
|
INTERNATIONAL COMPOUND #2, IC-2
| 143-18-0 |
|
POTASSIUM HEXFLUOROPHOSPHATE, KPF*6, 44008
| 17084-13-8
7789-23-3 |
|
HVI 150 BRIGHT STOCK, 68100
| 64742-57-0 |
|
RESOL 1-1-1 TRICHLOROETHANE, 04580
| 71-55-6 |
|
PHILLYCLAD 6470 RESIN
| 25068-38-6
13463-67-7
1332-58-7 |
|
PHILLYCLAD 6470 HARDENER
| 68410-23-1
98-00-0
1332-58-7
112945-52-5 |
|
UV TREATMENT SOLUTION
| |
|
PREVENT P3
| 106-97-8
74-98-6
71-55-6
123-91-1
8052-41-3
8012-95-1
107-98-2 |
|
BENTONE SD2 RHEOLOGICAL ADDITIVE, 32138
| 14808-60-7
14464-46-1 |
|
COPPER/COPPER ALLOYS PHOSPHOR BRONZE E, C50
| 7440-50-8
7440-31-5
7723-14-0 |
|
COPPER/COPPER ALLOYS PHOSPHOR BRONZE A, C51
| 7440-50-8
7440-31-5
7723-14-0 |
|
COPPER/COPPER ALLOYS PHOSPHOR BRONZE, C5110
| 7440-50-8
7440-31-5
7723-14-0 |
|
FRO460-FRO477
| |
|
FORMED MOLECULAR SIEVE, SZ-9
| 1344-00-9
1344-01-0
12736-96-8
1332-58-7 |
|
FORMED MOLECULAR SIEVE, PSE
| 1344-00-9
1344-01-0
12736-96-8
1332-58-7 |
|
FORMED MOLECULAR SIEVE, IGE
| 1344-00-9
1344-01-0
12736-96-8
1332-58-7 |
|
FORMED MOLECULAR SIEVE, WZ-10
| 1344-00-9
1344-01-0
12736-96-8
1332-58-7 |
|
GFO FIBER
| |
|
P-158 GFO
| |
|
WIPEOUT
| 111-30-8 |
|
LECTRO SAF BULK, 02837
| 71-55-6
78-92-2 |
|
CERAMIC CONDITIONER BASE, 4001/1074/01
| 25068-38-6
108-65-6
1330-20-7
13463-67-7
111-15-9 |
|
CERAMIC CONDITIONER SOLIDIFIER, 4201/213
| 584-84-9
108-65-6
1330-20-7 |
|
COPPER/COPPER ALLOYS ALUMINIM BRASS-ARSENIC
| 7440-50-8
1314-13-2
7440-38-2
7429-90-5 |
|
COPPER/COPPER ALLOYS CUPRO NICKEL 10%, C706
| 7440-50-8
7439-96-5
1309-37-1
7440-02-0 |
|
LIQUITEX ACRYLIC ARTIST COLOR 2 OZ JAR: (SU
| 13463-67-7
7631-86-9 |
|
LIQUITEX ACRYLIC ARTIST COLOR 8 OZ JAR: (SU
| 13463-67-7
7631-86-9 |
|
LIQUITEX ACRYLIC ARTIST COLOR 16 OZ JAR:(SU
| 13463-67-7
7631-86-9 |
|
LIQUITEX ACRYLIC ARTIST COLOR 32 OZ JAR:(SU
| 7631-86-9
13463-67-7 |
|
LIQUITEX ACRYLIC ARTIST COLOR 2 OZ TUBE:(SU
| 13463-67-7
7631-86-9 |
|
GLID-GUARD COAL TAR EPOXY 5270 SERIES, 5270
| 68410-23-1
1330-20-7
8007-45-2
14807-96-6
7631-86-9
1569-01-3
90-72-2 |
|
GLID-GUARD COAL TAR EPOXY 5270 SERIES, 5271
| 25068-38-6 |
|
GLID-GUARD COAL TAR EPOXY 5270 SERIES, 5272
| 1330-20-7
872-50-4 |
|
GLID-GUARD COAL TAR EPOXY 5270 SERIES, 5273
| 68410-23-1
90-72-2
1330-20-7
8007-45-2
14807-96-6
7631-86-9
1569-01-3 |
|
GLID-GUARD COAL TAR EPOXY 5270 SERIES, 5274
| 1330-20-7
8007-45-2
14807-96-6
7631-86-9
1569-01-3
25068-38-6 |
|
SPRED FLOOR OIL/ALKYD ENAMEL NO 841 SERIES,
| 64742-47-8
14807-96-6
1309-37-1
100-41-4 |
|
SPRED FLOOR OIL/ALKYD ENAMEL NO 841 SERIES,
| 64742-47-8
13463-67-7
14807-96-6
51274-00-1
100-41-4 |
|
SPRED FLOOR OIL/ALKYD ENAMEL NO 841 SERIES,
| 64742-47-8
13463-67-7
14807-96-6
100-41-4 |
|
SPRED FLOOR OIL/ALKYD ENAMEL NO 841 SERIES,
| 51274-00-1
1333-86-4
100-41-4
1309-37-1
64742-47-8
13463-67-7
14807-96-6 |
|
5018/5028/5034 BLACK DRY INK/BLACK TONER/CO
| 1333-86-4
3843-16-1
8050-09-7
9003-55-8
7439-89-6
1309-37-1 |
|
5018/5028/5034 BLACK DRY INK/BLACK TONER/CO
| 9003-55-8
7439-89-6
1309-37-1
8050-09-7
1333-86-4
3843-16-1 |
|
5018/5028/5034 BLACK DRY INK/BLACK TONER/CO
| 9003-55-8
7439-89-6
1309-37-1
8050-09-7
1333-86-4
3843-16-1 |
|
5018/5028/5034 BLACK DRY INK/BLACK TONER/CO
| 9003-55-8
7439-89-6
1309-37-1
8050-09-7
1333-86-4
3843-16-1 |
|
|