Search   
MSDS  : GC-1300 CLASS 1,2 OR 3
CAS  : 1309-60-0
NAME  : lead peroxide (lead dioxide), (osha pel from 29cfr
polysulfide polymer
===================== Product Identification =====================

MSDS NAME:GC-1300 CLASS 1,2 OR 3
NIIN:00N000106
MSDS Number: BCDSF
=== Responsible Party ===
Company:GOAL CHEMICAL SEALANTS CORP.
Emergency Phone Num:(213) 269-0461
CAGE:04011
=== Contractor Identification ===
Company:GOAL CHEMICAL SEALANTS CORP
Address:3137 E 26TH ST
Box:City:LOS ANGELES
State:CA
ZIP:90023-4206
Country:US
Phone:213-269-0461
CAGE:04011

============= Composition/Information on Ingredients =============

Name:LEAD PEROXIDE (LEAD DIOXIDE), (OSHA PEL FROM 29CFR
1910.1025)
CAS:1309-60-0
RTECS #:OG0700000
Fraction by Wt: 2.0%
OSHA PEL:0.05 MG/M3 (PB)
ACGIH TLV:0.15 MG/M3(PB); 8990

Name:POLYSULFIDE POLYMER
Fraction by Wt: 60.0%

===================== Hazards Identification =====================

Effects of Overexposure:MAY CAUSE SKIN & EYE IRRITATION

======================= First Aid Measures =======================

First Aid:EYE CONTACT: FLUSH AFFECTED AREA W/ WATER, SEE A PHYSICIAN.
SKIN: FLUSH W/ WATER.

===================== Fire Fighting Measures =====================

Flash Point:>400 F OC
Extinguishing Media:DRY CHEMICALS, WATER
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

================== Accidental Release Measures ==================

Spill Release Procedures:SPAT UP EXCESS, CLEAN RESIDUE W/ SOLVENT &
CLOTH M.E.K.

====================== Handling and Storage ======================

Handling and Storage Precautions:NORMAL TEMPERATURES, 80 F OR BELOW FOR
STORNG
Other Precautions:NONE

============= Exposure Controls/Personal Protection =============

Ventilation:SUFFICIENT
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health
MFG GIVES THE TLV AS 5-8 G/KILO; SPECIFIC GRAVITY IS 1.2000 - 1.5000.
ADDITIONAL INGREDIENTS INCLUDE 36% PIGMENTS AD 2% ADDITIVES.

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES

==================== Disposal Considerations ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/ FED., STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
TURTLE WAX; POLISH 8030-30-6
ETERNAFLEX-PT A URETHANE SEALANT 1700 1317-65-3
13463-67-7
ETERNZFLEX PT-B URETHANE SEALANT 1720-000
FLUOSILICIC ACID 16961-83-4
EPOXY ADHESIVE 2 COMPONENT NSRDC 2844-11-2 71-36-3
T-PD THINNER 71-55-6
75-09-2
108-88-3
SLCC-A CORROSION INHIBITOR (REVISED 12/85) 110-91-8
7732-18-5
KEM LUSTRAL ENAMEL-F65 G9;EMERALD GREEN 7439-92-1
8030-30-6
1330-20-7
SUPER POXEE-EPOXY RESIN
LAMINAR X-500 GREEN #34108 URETHANE COATING 584-84-9
7758-97-6
111-15-9
141-78-6
108-88-3
LAMINAR X-500 WHITE #27875 POLYURETHANE 111-15-9
141-78-6
108-88-3
1330-20-7
108-94-1
EPON CURING AGENT V-40
WELD-ON 3 FOR ACRYLIC 75-09-2
79-01-6
80-62-6
CATALYST 3332 614-45-9
HAMM-R AEROSOL SPRAY 1330-20-7
67-64-1
75-09-2
108-88-3
110-80-5
FORMULA 990 7647-01-0
RUST BAN EX 6671 LIGHT GRAY 1330-20-7
108-10-1
111-76-2
13463-67-7
E.C. CATALYST 5725 108-88-3
PLASTILOCK 605-4 78-93-3
108-90-7
108-10-1
67-63-0
EPON RESIN 8715
ZEP PHASE I (ACID PHASE TRUCK WSHNG CMPD) 7664-38-2
7664-39-3
PERMABOND SUPER GLUE' NO.130 137-05-3
SATINHIDE ALKYD LO-LUSTRE ENAMEL-BONE WHITE 8002-05-9
1330-20-7
96-29-7
602 SPEEDY BLOCKOUT, FAST DEY PRIMER
FUSE ON 905 108-94-1
109-99-9
78-93-3
ZEP BIG Z 1310-73-2
GC-1300 CLASS 1,2 OR 3 1309-60-0
LIGHT GRAY ENAMEL
YORK OIL C 8012-95-1
WEBTEX 43,SBR LATEX ADHESIVE 108-88-3
4111 GEAR OIL
3880 ADWELD 108-88-3
DOLPHS T-200X, XYLOL 1330-20-7
AUTOMATIC BLANKET WASH 4-1235 127-18-4
AUTOMATIC BLANKET WASH 4-1237 127-18-4
AUTOMATIC BLANKET WASH 4-1239 127-18-4
DIETHYL THIOUREA 105-55-5
GACOFLE H-2221R CARBON HYPALON 108-88-3
1330-20-7
71-23-8
GACOFLEX H-2202 GRAY HYPALON 108-88-3
1330-20-7
110-19-0
71-23-8
INDUSTRIAL ENAMEL BLACK, B54-B-11 8030-30-6
107-41-5
FLUOROGLIDE C.P. BULK 116-14-3
KRONITEX MP-280,TXP, MIL-H-19457B, TY 1
KRONITEX MP-600
MAGNUS 767 75-09-2
563-54-2
1336-21-6
67-63-0
NICKEL PENTRATE 1310-73-2
7631-99-4
7632-00-0
MIL-P-52192 B EPOXY PRIMER COATING 1330-20-7
109-86-4
108-10-1
OMEGA 4-852,MIL-R-25134 1336-21-6
LUBRIPLATE APG-90 8012-95-1
NELCO RED PRIMER, CM 337 67-56-1
108-10-1
108-88-3
71-36-3
50-00-0
108-95-2
BK UNIVERSAL CEMENT 765-1198 71-55-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net