===================== Product Identification =====================
MSDS NAME:ATOMIZED ALUMINUM POWDER, CODE:01-0840
NIIN:00D000834
MSDS Number: BBDKL
=== Responsible Party ===
Company:HUMMEL CHEMICAL CO
Address:10 HARMICH ROAD
Box:250
City:SOUTH PLAINFIELD
State:NJ
ZIP:07080
Country:US
Emergency Phone Num:(201) 754-1800
CAGE:60728
=== Contractor Identification ===
Company:HUMMEL CROTON INC
Address:10 HARMICH ROAD
Box:City:SOUTH PLAINFIELD
State:NJ
ZIP:07080
Country:US
Phone:908-754-1800
CAGE:60728
============= Composition/Information on Ingredients =============
Name:ALUMINUM (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: >98.5%
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:DUST MAY CAUSE RESPIRATORY TRACT
IRRITATION.
Effects of Overexposure:INHALATION:HIGH CONCENTRATION CAN CAUSE
RESPIRATORY TRACT IRRITATION;EYES:DUST MAY CAUSE
IRRITATION;SKIN:REPEATED AND PROLONGED CONTACT MAY CAUSE SLIGHT
IRRITATION;INGESTION:NEGLIGIBLE EFFECTS.
Medical Cond Aggravated by Exposure:PRE-EXISTING UPPER RESPIRATORY AND
LUNG DISEASE SUCH AS,BUT NOT LIMITED TO,BRONCHITIS,EMPHYSEMA AND
ASTHMA.
======================= First Aid Measures =======================
First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:USE CLASS"D" DRY CHEMICAL EXTINGUISHING AGENTS SUCH
AS DRY SAND; DO NOT USE WATER OR HALOGENATED AGENT AS EXTINGUISHER.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS IN
PRESSURE DEMAND MODE;GENTLY COVER THE BURNING POWDER WITH
EXTINGUISHER(DO NOT MIX WITH POWDER).PREVENT DUST FORMATION.
Unusual Fire/Explosion Hazard:WATER & BURNING ALUMINUM POWDER REACT
VIOLENTLY FORMING HYDROGEN & ALUMINUM OXIDE.ALUMINUM DUST MAY BE
IGNITED BY STATIC DISCHARGE.DUST IN AIR MAY BE EXPLOSION.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL IGNITION SOURCES.USE NON-SPARKING
TOOLS(SHOVELS).WEAR APPROPRIATE PROTECTIVE EQUIPMENTS.TRANSFER
SPILLED MATERIAL TO A LEAK PROOF CONTAINER FOR HAZARDOUS WASTE
DISPOSAL.IF VACUUM CLEANER IS USED,IT SHOULD BE GROUNDED TO
PREVENT STATIC.
====================== Handling and Storage ======================
Handling and Storage Precautions:USE NON-SPARKING HANDLING
EQUIPMENT.COVER AND RESEAL PARTIALLY EMPTY CONTAINERS.KEP
COMPLETELY DRY.STORAGE AREA MUST BE OF FIRE RESISTANT CONSTRUCTN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR APPROVED DUST MASK
Ventilation:LOCAL EXHAUST TO KEEP BELOW TLV LIMITS.
Protective Gloves:NOT NEEDED BUT WEAR COVERALLS
Eye Protection:SAFETY GLASSES WITH SIDE SHIELD
Supplemental Safety and Health
TYPE II MATERIAL OF SPEC MIL-P-14067 IS ALUMINUM
POWDER,ATOMIZED,SPHEROIDAL OR GRANULAL SHAPED; FOR SHIPPING
INFORMATION OF THIS PRODUCT CHECK DGSC-SLM CASE HISTORY
NO.87252H,PARAGRAPH 3(D).
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:2.70
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SILVERY METALLIC,NO ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WATER,HALOGENATED HYDROCARBONS,MINERAL ACIDS,ALKALIS AND STRONG
OXIDIZING MATERIALS.
Stability Condition to Avoid:IMPROPER STORAGE WHICH WOULD ALLOW
INTRODUCTION OF WATER/MOISTURE,HEAT,SPARKS & FOREIGN MATERIAL.
Hazardous Decomposition Products:ALUMINUM WHEN REACTS WITH WATER,ACIDS
OR ALKALIS,IT FORMS COMBUSTIBLE HYDROGEN GAS.
==================== Disposal Considerations ====================
Waste Disposal Methods:FOR DISPOSAL OF THIS MATERIAL AS A WASTE,ACT IN
ACCORDANCE WITH ALL APPLICABLE FEDERAL,STATE & LOCAL WASTE
MANAGEMENT REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ATOMIZED ALUMINUM POWDER, CODE:01-0840
| 7429-90-5 |
|
ATOMIZED ALUMINUM POWDER,ALCAN 201 OR X-85
| 7429-90-5 |
|
COMBAT, FIRE ANT KILLER
| 67585-29-4 |
|
COMBAT, ROACH CONTROL SYSTEM
| 67585-29-4 |
|
COMBAT, ANT CONTROL SYSTEM
| 67585-29-4 |
|
SCM 4 0,SELECTRON LEAD-TIN STRIP SOLUTION
| 7647-01-0
7732-18-5 |
|
FREON TF
| 76-13-1 |
|
ANSTAC M
| |
|
31-60059-206 POS ONE RINSE ADDATIVE
| 7631-90-5
497-19-8
7732-18-5 |
|
HYDROGEN PEROXIDE TOPICAL SOLUTION,P/N 5232
| 7722-84-1
7732-18-5 |
|
POTASSIUM HYDROXIDE, 45% SOLUTION
| 1310-58-3
7732-18-5 |
|
2X726-A DEGREASING SOLVENT
| 127-18-4
71-55-6
124-38-9 |
|
SOLITHANE(R) 113 RESIN
| 26471-62-5 |
|
C113-300
| |
|
CEE-BEE B-23
| 7664-38-2
7664-39-3 |
|
CORTEC-369
| 106-97-8 |
|
PR-1538 BLACK,PART A
| 101-14-4 |
|
PR-1538 AMBER,BLACK,PART B
| |
|
MOLYKOTE 4X SPRAY
| 71-55-6 |
|
SOLDER
| 7439-92-1
7440-31-5 |
|
DASCO GUARD 2336
| |
|
PHENYL PROPANOLAMINE HYDROCHLORIDE
| 154-41-6 |
|
FOSTA TUF-FLEX 730,IMPACT POLYSTYRENE
| 9003-55-8 |
|
CODE-ARC 7018M ELECTRODES-MIL-E-0022200/
| 7439-89-6
13463-67-7
7789-75-5
7439-96-5 |
|
LEAD ACID BATTERIES
| 7439-92-1
7664-93-9 |
|
FACTRAN EP-1
| |
|
FACTRAN EP-1;GREASE LUBRICANT
| |
|
ALLOY STEEL WELDING STUD
| 7439-89-6
7439-96-5
7440-47-3
7440-02-0 |
|
STAINLESS STEEL WELDING STUD
| 7439-89-6
7439-96-5
7440-47-3
7440-02-0
7439-96-5 |
|
CERAMIC STUD WELDING FERRULE
| 14808-60-7 |
|
CARBON STEEL WELDING STUD
| 7439-89-6
7439-96-5 |
|
WELDING STUD, ALUMINUM ALLOY
| 7429-90-5
7440-21-3
7439-95-4
7440-47-3 |
|
SULFLEX SILICONE RESIN
| |
|
DPD FREE CHLORINE REAGENT
| 7558-79-4
60-00-4 |
|
X7 XOMPOUND
| 75-09-2
127-18-4
108-95-2
1310-58-3 |
|
HYDRO-SEAL,HVY DUTY COLD PART CLNR,HS-9,9K
| 1310-58-3
108-95-2
1319-77-3
127-18-4
75-09-2 |
|
HS-3 HYDROSEAL REPLENISHER
| 1319-77-3
127-18-4
108-95-2
1310-58-3
75-09-2 |
|
HYDRO-SEAL,HEAVY DUTY COLD PART CLNR,HS-3K
| 1310-58-3
108-95-2
1319-77-3
127-18-4
75-09-2 |
|
GOLIATH PEN OIL (AEROSOL
| 8030-30-6
71-55-6
628-63-7
74-98-6
75-28-5 |
|
W.I.ASBESTOS GASKET CLOTH-TACKY
| 12001-29-5
9006-04-6 |
|
FLEXIBLE POLYURETHANE FOAM
| |
|
P65 PALLADIUM CHLORIDE
| 7647-10-1 |
|
EUTEC SILVER WELD ECONOMIZER #2
| 7440-22-4
7440-50-8
7440-66-6
7440-31-5 |
|
UC100 SERIES REFRASIL
| 112945-52-5 |
|
CAS#7631-99-4, SODIUM NITRATE
| 7631-99-4 |
|
STICK-EM GLUE TRAPS
| |
|
8500 SPMC14 ACID CLEANER
| 105-55-5
7757-82-6
7681-38-1
25155-30-0 |
|
MAGNESIUM CHLORIDE
| 7786-30-3 |
|
349 STAINLESS
| 7440-02-0
7440-33-7
1309-37-1
7439-96-5
7440-47-3 |
|
BRAYCOTE MICRONIC 745
| |
|
|