===================== Product Identification =====================
MSDS NAME:WELDING STUD, ALUMINUM ALLOY
NIIN:00D000869
MSDS Number: BBDLY
=== Responsible Party ===
Company:TRW,INC. NELSON STUD WELDING DIV.
Address:28TH ST & TOLEDO BLVD
City:LORAIN
State:OH
ZIP:44055
Country:US
Info Phone Num:216-245-6931
Emergency Phone Num:216-245-6931
Preparer's Name:A.L. LOTT,PHD,CIH
CAGE:81505
=== Contractor Identification ===
Company:TRW,INC. NELSON STUD WELDING DIV.
Address:28TH ST & TOLEDO BLVD
Box:City:LORAIN
State:OH
ZIP:44055
Country:US
Phone:216-245-6931
CAGE:81505
============= Composition/Information on Ingredients =============
Name:ALUMINUM (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: >94.0%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9394
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: <6.0%
Other REC Limits:NONE SPECIFIED
OSHA PEL:10 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9394
Name:MAGNESIUM
CAS:7439-95-4
RTECS #:OM2100000
Fraction by Wt: <5.5%
Other REC Limits:NONE SPECIFIED
Name:CHROMIUM (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: <0.2%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9394
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF WELDING FUMES MAY
CAUSE "METAL-FUME FEVER", AN INFLUENZA-LIKE ILLNESS; ALSO MAY CAUSE
RESPIRATORY IRRITATION. CHRONIC: PROLONGED OR REPEATED EXPOSURE MAY
CAUSE DERMATITIS AND SKIN SENSITIZATION. MAY ALSO CAUSE ULCERS IN
NOSE, CHRONIC RESPIRATORY IRRITATION AND LUNG CANCER.
Explanation of Carcinogenicity:CHROMIUM IS LISTED AS A CARCINOGEN BY
IARC AND NTP.
Effects of Overexposure:FEVER, CHILLS, MUSCLE ACHES, METALLIC TASTE IN
MOUTH, IRRITATION OF THROAT, HEADACHE, DIZZINESS, NAUSEA, WEAKNESS,
MENTAL CONFUSION.
Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS
======================= First Aid Measures =======================
First Aid:INHALED: REMOVE TO FRESH AIR. ARTIFICIAL RESPIRATION OR
OXYGEN AS INDICATED. SEEK MEDICAL ATTENTION. METAL FUME FEVER IS
NORMALLY SELF- LIMITING. EYES: IF PARTICLE ENTERS EYE, FLUSH WITH
WATER FOR 15 MINUTES. SEE DOCTOR IF SYMPTOMS PERSIST.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:DRY CHEMICAL
Fire Fighting Procedures:DUST MAY IGNITE AT HIGH TEMPERATURE OR WITH
STRONG OXIDIZING AGENTS. WEAR SELF-CONTAINED BREATHING APPARATUS
AND FULL PROTECTIVE CLOTHES.
Unusual Fire/Explosion Hazard:MOLTEN METAL MAY LIBERATE FUMES OF
ALUMINUM, MAGNESIUM, SILICON, AND CHROMIUM.
================== Accidental Release Measures ==================
Spill Release Procedures:GOOD HOUSEKEEPING PRACTICE SHOULD BE PRACTICED
TO KEEP DUST ACCUMULATION DOWN.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:NONE
Other Precautions:NONE
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR EMERGENCY OCCURS; USE NIOSH/MSHA APPROVED RESPIRATOR WITH
DUST/MIST/FUME CARTRIDGE. USE IAW 29 CFR 1910.134.
Ventilation:USE USE ADEQUATE MECHANICAL VENTILATION TO MAINTAIN
EXPOSURE BELOW TLV/PEL.
Protective Gloves:AS REQUIRED
Eye Protection:AS REQD FOR WORK PERFORMED
Other Protective Equipment:OTHER PROT CLOTHING AS NEEDED DURING WELDING
OPERATIONS.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
MSDS FEB 1, 1986.
================== Physical/Chemical Properties ==================
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:<1250F,<677
Appearance and Odor:METALLIC
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES, MERCURY, HALOCARBONS
Stability Condition to Avoid:CONTACT WITH INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
==================== Disposal Considerations ====================
Waste Disposal Methods:SCRAP METAL MAY BE RECLAIMED OR DISPOSED OF IN
LANDFILL I/A/W FEDERAL,STATE,LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ATOMIZED ALUMINUM POWDER, CODE:01-0840
| 7429-90-5 |
|
ATOMIZED ALUMINUM POWDER,ALCAN 201 OR X-85
| 7429-90-5 |
|
COMBAT, FIRE ANT KILLER
| 67585-29-4 |
|
COMBAT, ROACH CONTROL SYSTEM
| 67585-29-4 |
|
COMBAT, ANT CONTROL SYSTEM
| 67585-29-4 |
|
SCM 4 0,SELECTRON LEAD-TIN STRIP SOLUTION
| 7647-01-0
7732-18-5 |
|
FREON TF
| 76-13-1 |
|
ANSTAC M
| |
|
31-60059-206 POS ONE RINSE ADDATIVE
| 7631-90-5
497-19-8
7732-18-5 |
|
HYDROGEN PEROXIDE TOPICAL SOLUTION,P/N 5232
| 7722-84-1
7732-18-5 |
|
POTASSIUM HYDROXIDE, 45% SOLUTION
| 1310-58-3
7732-18-5 |
|
2X726-A DEGREASING SOLVENT
| 127-18-4
71-55-6
124-38-9 |
|
SOLITHANE(R) 113 RESIN
| 26471-62-5 |
|
C113-300
| |
|
CEE-BEE B-23
| 7664-38-2
7664-39-3 |
|
CORTEC-369
| 106-97-8 |
|
PR-1538 BLACK,PART A
| 101-14-4 |
|
PR-1538 AMBER,BLACK,PART B
| |
|
MOLYKOTE 4X SPRAY
| 71-55-6 |
|
SOLDER
| 7439-92-1
7440-31-5 |
|
DASCO GUARD 2336
| |
|
PHENYL PROPANOLAMINE HYDROCHLORIDE
| 154-41-6 |
|
FOSTA TUF-FLEX 730,IMPACT POLYSTYRENE
| 9003-55-8 |
|
CODE-ARC 7018M ELECTRODES-MIL-E-0022200/
| 7439-89-6
13463-67-7
7789-75-5
7439-96-5 |
|
LEAD ACID BATTERIES
| 7439-92-1
7664-93-9 |
|
FACTRAN EP-1
| |
|
FACTRAN EP-1;GREASE LUBRICANT
| |
|
ALLOY STEEL WELDING STUD
| 7439-89-6
7439-96-5
7440-47-3
7440-02-0 |
|
STAINLESS STEEL WELDING STUD
| 7439-89-6
7439-96-5
7440-47-3
7440-02-0
7439-96-5 |
|
CERAMIC STUD WELDING FERRULE
| 14808-60-7 |
|
CARBON STEEL WELDING STUD
| 7439-89-6
7439-96-5 |
|
WELDING STUD, ALUMINUM ALLOY
| 7429-90-5
7440-21-3
7439-95-4
7440-47-3 |
|
SULFLEX SILICONE RESIN
| |
|
DPD FREE CHLORINE REAGENT
| 7558-79-4
60-00-4 |
|
X7 XOMPOUND
| 75-09-2
127-18-4
108-95-2
1310-58-3 |
|
HYDRO-SEAL,HVY DUTY COLD PART CLNR,HS-9,9K
| 1310-58-3
108-95-2
1319-77-3
127-18-4
75-09-2 |
|
HS-3 HYDROSEAL REPLENISHER
| 1319-77-3
127-18-4
108-95-2
1310-58-3
75-09-2 |
|
HYDRO-SEAL,HEAVY DUTY COLD PART CLNR,HS-3K
| 1310-58-3
108-95-2
1319-77-3
127-18-4
75-09-2 |
|
GOLIATH PEN OIL (AEROSOL
| 8030-30-6
71-55-6
628-63-7
74-98-6
75-28-5 |
|
W.I.ASBESTOS GASKET CLOTH-TACKY
| 12001-29-5
9006-04-6 |
|
FLEXIBLE POLYURETHANE FOAM
| |
|
P65 PALLADIUM CHLORIDE
| 7647-10-1 |
|
EUTEC SILVER WELD ECONOMIZER #2
| 7440-22-4
7440-50-8
7440-66-6
7440-31-5 |
|
UC100 SERIES REFRASIL
| 112945-52-5 |
|
CAS#7631-99-4, SODIUM NITRATE
| 7631-99-4 |
|
STICK-EM GLUE TRAPS
| |
|
8500 SPMC14 ACID CLEANER
| 105-55-5
7757-82-6
7681-38-1
25155-30-0 |
|
MAGNESIUM CHLORIDE
| 7786-30-3 |
|
349 STAINLESS
| 7440-02-0
7440-33-7
1309-37-1
7439-96-5
7440-47-3 |
|
BRAYCOTE MICRONIC 745
| |
|
|