===================== Product Identification =====================
MSDS NAME:THIXOTROPIC RESIN,CODE 14-RP-653
NIIN:00N001381
MSDS Number: BCHRK
=== Responsible Party ===
Company:SCM-GLIDDEN COATINGS & RESINS DIVISION
Address:925 EUCLID AVE
City:CLEVELAND
State:OH
ZIP:44115
Country:US
CAGE:DO630
=== Contractor Identification ===
Company:GLIDDEN CO MEMBER OF ICI WORLD PAINTS
Address:925 EUCLID AVE
Box:15049
City:CLEVELAND
State:OH
ZIP:44115
Country:US
Phone:216-344-8000
CAGE:72818
Company:SCM-GLIDDEN COATINGS & RESINS DIVISION
Address:925 EUCLID AVENUE
City:CLEVELAND
State:OH
ZIP:44115
Phone:(216) 826-5566
CAGE:DO630
============= Composition/Information on Ingredients =============
Name:SILICA, AMORPHOUS, DUST
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 2%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3; 8990
Name:POLYESTER RESIN SOLIDS
Fraction by Wt: 60%
Name:STYRENE MONOMER
CAS:57-11-4
RTECS #:WI2800000
Fraction by Wt: 38%
ACGIH TLV:50 PPM (MFR)
===================== Hazards Identification =====================
Effects of Overexposure:EYE: IRRIT. SKIN: IRRIT/DERMATITIS. VAPOR:
IRRIT OF RESP TRACT,HEADACHE,DIZZY,UNCONSCIOUSNESS.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH WATER 15 MIN,GET MED ATTN. SKIN: WASH WITH
SOAP & WATER. INHALATION: REMOVE FROM EXPOSURE,RESTORE BREATHING IF
NEEDED,GET MED ATTN.
===================== Fire Fighting Measures =====================
Flash Point:90F/32C
Lower Limits:1.1
Extinguishing Media:CO2,DRY CHEMICAL,FOAM
Fire Fighting Procedures:WATER SPRAY TO COOL EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO HEAT OR FLAME. VAPORS MAY IGNITE EXPLOSIVELY.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. MOP SPILLS WITH INERT ABSORBENT.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 100F/37C. KEEP CONTAINERS
CLOSED & AWAY FROM HEAT & OPEN FLAME. AVOID PRLNGD BREATH OF VAPORS
OR SPRAY MIST & SKIN CONTACT.
Other Precautions:DO NOT TAKE INTERALLY. DO NOT APPLY TO HOT SURFACES.
AVOID CONTAMINATION WITH FOREIGN MATERIALS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAST
Protective Gloves:SOLVENT RESIST
Eye Protection:SPLASH PROOF GOGGLES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:293F/145C
Vapor Pres:4.5
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:47
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO,CO*2 & POSSIBLE ACID FUMES ON
IGNITION.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|